Tender For Provn Of Toughened Door, False Ceiling, Upvc Window And Adequate Split Ac And Electrical Work In Corridor Area Of Offr Fam Ward-I , Offr Fam Ward-Ii,Offr Med Ward And Offr Surgical Ward At Ahrr Under Ge E/M R&R Hosp. Delhi Cantt-10
Tender Value
32.01 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
19 days left
EMD
64026
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Toughened Door, False Ceiling, Upvc Window And Adequate Split Ac And Electrical Work In Corridor Area Of Offr Fam Ward-I , Offr Fam Ward-Ii,Offr Med Ward And Offr Surgical Ward At Ahrr Under Ge E/M R&R Hosp. Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as directed. |
| 2 | M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built inv 1:6 complete all aws specified and as directed |
| 3 | Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 4 | M&L rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surface to fair and even without using extra cement complete all as specified and as directed |
| 5 | M&L rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface to fair and even without using extra cement complete all as specified and as directed |
| 6 | M&L rendering 10mm thick in CM 1:3 on fair faces of ceilling to fair and even without using extra cement complete all as specified and as directed |
| 7 | M & L for applying two coats of cement base wall care putty on plastered surface of wall and making the surface even & smooth for receiving distemper/paint of any description, complete all as specified & directed |
| 8 | M & L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper, complete all as specified & directed. |
| 9 | M & L for preparation of newly plastered surfaces of walls and applying two coats of exterior grade weather proof paint over a coat of weather resistant acrylic primer, complete all as specified and directed. |
| 10 | M & L for preparation of newly plastered surfaces of ceilling and applying two coats of oil bound distemper, complete all as specified & directed. |
| 11 | M & L for complete removal of existing treatment on old plastered surfaces of walls and applying two coats of oil bound distemper, complete all as specified & directed. |
| 12 | Taking down chowkhat or frames with shutter (without taking off shutter from frame) area exc 1.50 sqm each but n exc 6.00 Sqm each. |
| 13 | Providing and fixing factory made UPVC door/window frame of overall size as per site requirement, made from extruded UPVC profiles for outer frame size 60 mm × 55 mm ± 2 mm, wall thickness not less than 2.0 mm (± 0.2 mm), multi-chambered section reinforced with galvanized mild steel tube of minimum 1.0 mm thickness inside the profile for strength and rigidity, mitred and fusion welded at corners. |
| 14 | S&F in repair toughened glass frameless door with fixed portion, of 12 mm thickness, including cutting holes, edges rounded and etching works etc and all kind of SS patch fitting & fixture, spider patch etc, complete all as directed. |
| 15 | Providing and fixing factory made upvc white colour Door openable shutter profile to be of size 60 mm × 50 mm ± 2 mm, wall thickness not less than 2.0 mm (± 0.2 mm), reinforced with galvanized mild steel tube of minimum 1.0 mm thickness. Shutter to be fitted with UPVC panels of 20 mm ± 1 mm thickness (solid type) or 5 mm clear/tinted/obscured glass for glazed portion, fixed with UPVC beadings.Frame and shutter assembly to include stainless steel hinges (minimum 3 nos. per shutter), UPVC-compatible handle set, multipoint locking system or approved mortice lock, and EPDM/TPE weather gaskets for all contact edges. |
| 16 | S&F of stainless steel handle 450 mm long fixed to 12 mm thick toughned glass door with and including all fixing accessories i. e. bolt washer, adhesive etc, complete all as directed. |
| 17 | Demolition of precast cement concrete louvers and jallies, 25mm thick (measured solid) in cluding all mould-ings |
| 18 | S & F 200mm long, stainless steel barrel tower bolts of extruded section complete all as specified and directed. |
| 19 | S & F 200mm Size extruded stainless steel handles, fabricated type complete all as specifed and directed |
| 20 | S & F stainless steel, sliding door bolt 450mm length with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded secitons, complete all as specified & directed. |
| 21 | S & F zebra type roller blinds of polyester fabric, alternating translucent/opaque horizontal strips, GSM not less than 250, mounted on aluminium roller tube dia not less that 38mm, side chain control with clutch, end brackets of aluminium/galvanised steel, complete with fixing arrangements in approved shade all as specified and directed. |
| 22 | S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of overall length 140mm, complete all as specified and dirrected. |
| 23 | Dismantle Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar |
| 24 | M & L for 16 to 18 mm thick granite of any type (table rubbed & polished) in jambs, pillars, window cills, plate forms,floors,steps, crumple joints in CM (1:4) including pointing in white cement (1:2), using marble dust with admixture of pigment to match with shade of granite complete all as directed.. |
| 25 | M & L 16-18mm thick granite (of any type) work (table rubbed and polished as in flooring and like in cement mortar (1:6) including pointing in matching cement using marble dust with admixture of pigment to match with shade of granite, complete all as specified & directed. |
| 26 | Providing and fixing factory made UPVC including necessary arrangement of deco grill with 4 mm clear/tinted/obscured glass for glazed portion,white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.5mm). Window profile with hollow section with multi chamber. Frame (70mm x 47mm), sliding sash (42mm x 60mm). Sliding mesh Sash (42mm x 50mm) all as per availability Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.er bedding etc and other required accessories including Deco grill all as specified and directed. |
| 27 | Providing and fixing factory made upvc white colour Door/window openable shutter profile to be of size 60 mm × 50 mm ± 5 mm, wall thickness not less than 2.0 mm (± 0.2 mm), reinforced with galvanized mild steel tube of minimum 1.0 mm thickness. Shutter to be fitted with UPVC panels of 20 mm ± 1 mm thickness (solid type)with 5 mm clear/tinted/obscured glass for glazed portion, fixed with UPVC beadings.Frame and shutter assembly to include stainless steel hinges (minimum 3 nos. per shutter), UPVC-compatible handle set, multipoint locking system or approved mortice lock, and EPDM/TPE weather gaskets for all contact edges. |
| 28 | M&L for exposed GI frame/ grid system duly powder coated for module size of 600 x 600 mm suitable for lay-in aluminium/ metal/ mineral fiber ceiling ties having main T runner of 24mm size, suspended at 1200 mm C/C and cross T runner of 24 mm size, suspended at 600 mm C/C with interlocking arrangement to form grid of 600 x 600 mm , perimeter runner/ channel of 15 mm size, main and cross T runner supported by 4mm dia GI rod from slab/ roof, wall angle etc with and including all fixing accessories and making good of disturbed wall surrfaces with POP and one coat of oil emulsion distemper, as required to match the existing surfaces, complete all as directed . |
| 29 | M&L for metal false ceiling, lay-in type, 0.5mm thick having tegular edge profile , duly powder coated, perforated type with glass fiber acoustic fleece, suitable for false ceiling grid/ frame module of 595 x 595mm size, complete all as specified and directed. (Note : The grid/ frame shall be measured and paid separetly). |
| 30 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, fillets etc, and removal of debries from site complete all as specified and directed. |
| 31 | S & F 5mm thick sheet glass best quality and glazing with necessarey beading all as specified and directed. |
| 32 | Providing and fixing ss doublle action floor spring hydraulically regulated having load bearing capacity not less than 100Kg with brass piovt and cover plate complete with accessories jand fixtures. Floor spring shell be fixed in floor recess with cement concrerte 1:2:4 including makijng good all as specifed and directed. |
| 33 | S & F stainless steel door lock, glass to glass type, suitable for 12mm framless toughned glass door with and including all fixing accessories i.e. bolt, washer, screws, dhesive etc, complete all as specifed and directed. |
| 34 | M & L point wiring for modular switches with 1.5 Sqmm, PVC insulated, unsheathed, multistranded, copper conductor Cable, FRLS, 1100 Volt grade, including 1.5 Sqmm size, PVC insulated, unsheathed, copper earth continuity conductor, connected to earth dolly, drawn through and including concealed, rigid non-metallic PVC Conduit of minimum 20 mm dia or higher as per site requirement with all fittings such as GI metal flush box suitable for modular switches / sockets / fan regulators with cover plates, blanking plates, brass / cadmium plated screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- |
| 35 | One light/fan/bell/exhaust fan point controlled by one switch. |
| 36 | One 3 Pin socket outlet 5 Amps on Independent board. |
| 37 | One 3 Pin socket outlet 5 Amps on same board. |
| 38 | All as per srl item No. 34 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point. |
| 39 | All as per item No. 34 above but wiring with 4 sq mm FRLS copper wire for industrial socket outlet 3 pin 20 / 25 Amps point and one single core 4 sq mm FRLS PVC insulated unsheathed copper cable as earth continuity conductor. |
| 40 | S & F Modular Switch 1 way 16 A, 1 Module IP -20, ISI marked complete all as specified and directed. |
| 41 | S & F Modular Socket 6 / 16 A - 2/3 Pin combined 2 module IP-20, ISI marked complete all as specified and directed |
| 42 | S & F Modular Switch 1 way 6 /10 A, 1 Module IP-20, ISI marked complete all as specified and directed. |
| 43 | S & F Modular Socket 6 / 10 A - 2 / 3 Pin combined 2 module IP-20, ISI marked complete all as specified and directed. |
| 44 | S & F of Ceiling rose surface Polycarbonate type with three terminals 240 Volts complete all as specified and directed. |
| 45 | S & F of Modular AC Box, power socket with top 240 volts AC complete with one SP MCB, 20 amps concealed / flush to wall surface complete all as specified and directed. |
| 46 | Supply and fix of recessed 36 W LED 2X2 panel backlit type only. Luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting in office areas. The LEDs used should have CRI ≥ 80 and CCT 6500K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire system efficacy of ≥ 120 lumen/watt. The luminaire shall have life class of min 50,000 burning hrs. The electronic driver used shall have a power factor ≥0.95 . Fixture must have voltage range protection from 140-270V along with inbuilt surge protection of min 3.5KV. The luminaire shall pass Insulation Resistance test @ ≥ 2MΩ . The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires. Manufacturer shall have inhouse lab approved by NABL as per 2019 standards. |
| 47 | M & L for Sub main wiring with 2 x 6 Sqmm and 1 x 6 sqmm (for earth) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including regid PVC conduit 20 mm dia or higher, complete with all conduit accessories and connected with thimble from main DB / Panel to sub DB complete all as directed.Note :1. The two run of 6 Sqmm wire, one run of 6 Sqmm wire (for earth) and 1 mtr PVC conduit pipe will be measured as one unit. |
| 48 | S & F Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of RCCBs / MCBs and isolators etc and making all necessary connections complete all as directed. |
| 49 | Supply and fix MCB SPN 32 Amps 240 volts 10 KA 50 HZ C curve complete all as specified and directed. |
| 50 | S & F MCB SP, 40 Amps capacity, 240V,10kA, single pole with over load and short circuit protection complete all as specified and directed |
| 51 | S & F MCB, SP, 6 to 32 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed |
| 52 | Supply, installation, testing and commissioning of cassette type ceiling fan, 600 mm BLDC energy-efficient type, air delivery not less than 320–350 CMM, suitable for mounting in false ceiling, complete vibration-free mounting frame, fixing accessories, and electrical connections remote operated, including cutting and making good the false ceiling as required, complete all as directed. Please Enable Macros to View BoQ information |
| 53 | Supply, installation, testing and commissioning of cassette type ceiling fan, 600 mm BLDC energy-efficient type, air delivery not less than 320–350 CMM, suitable for mounting in false ceiling, complete vibration-free mounting frame, fixing accessories, and electrical connections remote operated, including cutting and making good the false ceiling as required, complete all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender