Tender For Providing Interlock Paver Block Laying Work In Sathy Branch
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Sep 2026
32 days left
EMD
85000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Interlock Paver Block Laying Work In Sathy Branch
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling ,Removing,clearing away for damaged plain cement concrete portion wherever necessary and th within the compound in places shown by the departmental officers with initial lead and etc., complete complying with standard specifications. |
| 2 | EARTHWORK EXCAVATION for foundation in all soils and sub soils to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed and consolidated and depositing the surplus earth within the compound in places shown by the Corproation Officers with initial lead and lift etc., complete complying with standard specifications. |
| 3 | Clearing away and carefully stacking the Excavated earth and damaged Concrete slabs for re-use for any levelling area for our corporation land etc complete as directed by the corporation officers. |
| 4 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, including cost of materials, labour charges, rentals for machinery, fuel and all other incidental charges etc.,Complete as per clause 406 of MORTH Vth Revision Specification No. 111, 112, 406, 900 |
| 5 | Providing and laying factory made cement concrete paver blocks of required strength, thickness, colour & size/shape, made by table vibratory method using PU (Rubber mould) mould, laid in required colour& pattern over compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibrator compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc., complete as per manufacturer's specification & direction of Corporation officers. 83mm thick C.C.paver block of m-30 grade with approved colour,design & pattern. |
| 6 | CEMENT CONCRETE 1:2:4 (One cement, two sand and four aggregates) using 20mm gauge hard granite stone jelly for flooring including laid in layers of not more than 15cm thick, well rammed etc., complete complying with standard specification. |
| 7 | Reinforced Cement Concrete 1:2:4 (One Cement, Two sand and Four aggregates) using 20mm gauge hard broken granite stone jelly for RCC works excluding centering, shuttering and cost of reinforcement grills in position but including laying curing and finishing and also fixing clamps wherever necessary and as directed by the Corporation Officers etc., complete complying with standard specifications |
| 8 | Supplying and erecting centering for sides and soffits of Reinforced Cement Concrete surfaces of following categories including strutting for 3.66m height using MS sheet of size 3'x2'(0.90x0.60) 10gauge stiffened with welded MS angle of size 25x25x3mm laid over silver oak of size 10x6.5cm spaced at 90cm c/c and supported by casurina props 10 to 13 cm dia spaced at 75cm c/c as directed by the corporation officers etc complete complying with standard specification |
| 9 | Supplying fabrication and placing in position of Mild steel (or) Ribbed tar steel grills for all RCC works including cost of steel and binding wire also in all floors etc., complete complying with standard specifications |
| 10 | Plastering with cement mortar 1:3 (one cement and Three P sand ) 10mm thick in Rcc Exposed surface etc complete |
| 11 | Supplying and PAINTING TWO COATS with best and approved first quality of plastic enamal paint (weather shield)in the outer walls overONE primary coat of wall primer including cost of paint and other materials,brushes,scaffolding charges including clearing the existing surface by manual labour as directed by the departmental officers complying with standard spefication etc complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 32 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 32 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender