Tender For Annual Repair & Maintenance Of Various Type-I & Type-Vi Qtrs Of Gad At Kasumpti , Shimla-171009. (Sh:- Providing And Fixing Cupboard In Type - Ii Set No. 628 ,630, Type- I , 219 And White Washing And Distempering In Various Sets Due / Vacation
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Aug 2026
4 days left
EMD
9800
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Annual Repair & Maintenance Of Various Type-I & Type-Vi Qtrs Of Gad At Kasumpti , Shimla-171009. (Sh:- Providing And Fixing Cupboard In Type - Ii Set No. 628 ,630, Type- I , 219 And White Washing And Distempering In Various Sets Due / Vacation Under Kasumpti Sub- Division ).
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing 19mm thick water proof commercial board in box /shutters for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. |
| 2 | Providing and fixing 0.80mm thick coloured or plain lamination sheet (sunmica) on boards / ply wood sheets with approved adhesive and nails etc complete, including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. |
| 3 | Providing and fixing ply wood lining with but jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 6mm thick. |
| 4 | Providing and fixing square edges cover fillets (beading) 19mmx6mm(Nineteen milimetre into six milimetre) section i/c mitring at junctions with wood screws and nails complete including carriage of matrials in all leads and lifts as per directions of the Engineer-In-Charge.(i)1st class deodar wood. |
| 5 | Providing and fixing bright finished brass ball catcher 10 mm dia including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 6 | Providing and fixing bright finished brass handles with screws etc complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 100mm (One hundred milimetre) |
| 7 | Applying priming coat over new wood and wood based surfaces after and i/c preparing the surface by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. |
| 8 | Painting two coats (excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stopping including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) With white enamel paint. |
| 9 | Providing woodwork in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position including carriage of materials in all leads as per directions of the Engineer-in-Charge. (i) 2nd class Marindi wood |
| 10 | Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 11 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. |
| 12 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two C.P. Brass brackets fixed with C.P. Brass screws and PVC sleeves etc, including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (i) 25 mm dia |
| 13 | Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade Old work (one or more coats). including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 14 | Wall painting (One coat) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 15 | Removing dry or oil bound distemper, water proofing cement paint and the like by scraping and sand papering the wall surface smooth including necessary repairs to scratches complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade including carriage of materials in all leads as per directions of the Engineer-in-Charge. (i) One or more coats on old work |
| 17 | Finishing wall with weather proof exterior grade emulsion of approved design Apexultima Protek ) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth including carriage of materials in all leads as per directions of the Engineer-in-Charge. |
| 18 | Melamine polishing on wood work (one or more coat) including carriage of materials in all leads and lifts as per direction of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender