Tender For Construction Of 2 Nos. Of B-Type Judicial Quarter (Duplex) At Garapur Over The Land Available Behind The Residential Quarters Of Honourable District Judge Kendrapara For The Year 2024-25
Tender Value
2.93 Crore
Estimated cost
Bid Submission
24 Aug 2026
4 days left
EMD
2.93 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kendrapara → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of 2 Nos. Of B-Type Judicial Quarter (Duplex) At Garapur Over The Land Available Behind The Residential Quarters Of Honourable District Judge Kendrapara For The Year 2024-25
BOQ
| Sl. No. | Item Description |
| 1 | Civil works:-Construction of single under reamed bored compaction pile foundation of 300mm dia upto 7.00 mtr long with RCC M-25 using crushed broken hard granite chips of 20mm and down graded with required design with cost conveyance taxes cost of all materials and labour etc complete as per specification and direction of Engineer in charge |
| 2 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material upto 1000m lead including cost of all labour, machinery etc complete as per Technical Specifications and Clause-201 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 3 | Earth work in excavation of foundation in ordinary soil including dressing and levelling the beds within 50m. initial lead and 1.5m. initial lift with cost, conveyance, taxes as per specification and direction of Engineer in charge. |
| 4 | Supplying, filling in foundation and plinth with good quality river sand with watering and ramming including cost, conveyane, cost of all materials and labour etc complete as per direction and specification of Engineer in charge |
| 5 | Dismantling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debries with 50m lead etc complete as per specification and direction of Engineer in charge |
| 6 | Providing & laying plain Cement concrete (1:3:6) in foundation and plinth using 4cmsize hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers to required thickness including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. |
| 7 | Providing & laying plain Cement concrete (1:2:4) in foundation and plinth using 4cmsize hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers to required thickness including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. |
| 8 | Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Foundation and Plinth for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. |
| 9 | Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Superstructure and for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. (Ground floor) |
| 10 | 1st floor |
| 11 | RCC work of M-25 with 20mm and down graded size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works including cost, conveyance, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge. Pile Cap and footing |
| 12 | Plinth beam |
| 13 | Column -Ground floor |
| 14 | 1st floor |
| 15 | Roof beam -Ground floor |
| 16 | 1st floor |
| 17 | Lintel-Ground floor |
| 18 | 1st floor |
| 19 | Chajja-Ground floor |
| 20 | 1st floor |
| 21 | Staircase -Ground floor |
| 22 | Roof slab -Ground floor |
| 23 | 1st floor |
| 24 | Shelves GF |
| 25 | 1st floor |
| 26 | RCC work of M-20 with 20mm and down graded size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works including cost, conveyance, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge. Footing and foundation |
| 27 | Column -Ground floor |
| 28 | Drain wall |
| 29 | Grade Beam |
| 30 | Cutting, straightening coiled or bent up M.S. Rod or tor steel using SAIL/RINL/TATA/JINDAL STEEL/ SHYAM STEEL including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. Ground floor |
| 31 | 1st floor |
| 32 | Providing 2.5cm thick grading concrete of prop.(1:2:2) using 6mm size H.G. chips of approved quality & from approved quarry including watering, curing with cost, conveyances, taxes of all materials, cost of all labour, T&P required for the work etc. complete as per direction of Engineer-in-charge GF |
| 33 | 1st floor |
| 34 | Providing 6mm thick cement plaster in cement mortar (1:4) in all floors finished smooth to inside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Ground floor) |
| 35 | 1st floor |
| 36 | Providing 12 mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Ground floor) |
| 37 | 1st floor |
| 38 | Providing 12 mm thick cement plaster in cement mortar (1:4) with neat cement punning including racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge (In Drain) |
| 39 | Providing 16mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to inside ceiling surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.(Ground floor) |
| 40 | 1st floor |
| 41 | Supplying, fitting and fixing of 20mm thick Granite stone in landing and floors over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. Ground floor |
| 42 | Supplying, fitting and fixing of 20mm thick granite stone in stair, trade and risers of steps over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge .Ground floor |
| 43 | Supplying, fitting and fixing of 10mm thick granite stone in dadoes and skirting over 12mm thick bed of cement mortar(1:3) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge .Ground floor |
| 44 | Supplying, fitting and fixing of Vitrified tiles (Plain / Ivory) in floors of size (600x600mm) over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge Ground floor |
| 45 | 1st floor |
| 46 | Supplying, fitting and fixing of Vitrified tiles in dadoes, skirting and risers of steps over 12mm thick bed of cement mortar(1:3) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge Ground floor |
| 47 | 1st floor |
| 48 | Supplying, fitting and fixing of Vitrified Industrial tiles in floors of size (300x300mm) over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge Ground floor |
| 49 | Finishing wall surface with cement based wall putty(water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges, conveyance, taxes of all materials and cost of all labour with TandP etc complete as per specification and direction of Engineer in charge In all floors.Ground floor |
| 50 | 1st floor |
| 51 | Painting two coats with approved plastic emulsion paints of approved colour, shade over a coat of water bound cement primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour TandP etc complete as per specification and direction of Engineer in charge. Ground floor |
| 52 | 1st floor |
| 53 | Painting two coats with anti-fungal resistance Weather Seal Coat over a coat of primer of approved shade upto any height by means of brush to outside surface of walls after cleaning the surface including watering, curring etc. complete in all floors including cost, conveyance, taxes of all materials, labours sundries T&P required for the work as per specification and direction of Engineer in charge Ground floor |
| 54 | 1st floor |
| 55 | Painting two coats with approved Synthetic enamel paints of approved colour, shade over a coat of primer in Iron work including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour TandP etc complete as per specification and direction of Engineer in charge. Ground floor |
| 56 | 1st floor |
| 57 | Providing and fixing seasoned dressed non sal wood work in choukatha at any locations including doors, windows, cupboard, clerestory and other frames fixing in position including cost of hinges, M.S. flat (30mm x 6mm) hold fasts lugs or dash fasteners of required dia and length as per drawing / specification, at all floors and all heights. |
| 58 | Supplying and fixing W.I. clamps 33cm to 38Cm long of 35mm × 5mm size for doors, windows and ventilators including fixing in cement concrete (1:3:6) with 12mm, to 20mm hard stone chips or in cement mortar (1:3) including cost of all materials, conveyance, taxes, etc. all complete as per the direction of Engineer-in-charge |
| 59 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR.block board pasted with 1 mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc complete. |
| 60 | Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6 mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 61 | Supplying, fitting & fixing in all floors of M.S.grills and gates, with top rails, steel windows, critical frames for windows balustrades of stair case and parapet railing made out of M.S.square bar/flat as per approved drawing and design including making holes in walls and RCC structure, wood work etc and making good to the damages to walls with cement concrete(1:2:4) with hard crusher broken granite stone chips of 12mm to 20mm size(20mm size not to exceed 25%) of approved quality with cost of all materials labour, cost of welding all T&P, sundreis etc complete in all respect as per specification and direction of Engineer in charge(screws and other hardward required materials to be used in the work shall be of approved quality and specification and shall have to be supplied by the contractor at his own cost In windows |
| 62 | Supplying, fitting & fixing in all floors of M.S.door and window, with top rails, steel windows, critical frames for windows balustrades of stair case and parapet railing made out of M.S.square bar/flat as per approved drawing and design including making holes in walls and RCC structure, wood work etc and making good to the damages to walls with cement concrete(1:2:4) with hard crusher broken granite stone chips of 12mm to 20mm size(20mm size not to exceed 25%) of approved quality with cost of all materials labour, cost of welding all T&P, sundreis etc complete in all respect as per specification and direction of Engineer in charge(screws and other hardward required materials to be used in the work shall be of approved quality and specification and shall have to be supplied by the contractor at his own cost In doors |
| 63 | Supplying,fabricating and fixing of Structural steel work using M.S.I Sections such as angle, flat, channel,square bar, plate pipes etc. inclluding cutting bending welding, hoisting and fixing iin position including all cost,conveyance,royalty & taxes of all materials,labour,T&P required for the work etc. complete as per specification & direction of the Engineer-in-charge. |
| 64 | Supplying,fitting & fixing of cow catcher made out of 100mm dia (Heavy) MS pipe placed at 200mm c/c over 150mm x 80mm MS joist placed placed at 1.0m c/c and fixing the pipe with 40x6mm MS flat including all cost,conveyance,royalty & taxes of all materials,labour,T&P required for the work etc. complete as per specification & direction of the Engineer-in-charge. |
| 65 | Construction of granular sub-base by providing close graded Granular sub-base Grading-VI materials as per table 400-I, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MORT&H Specification for Road & Bridge works (5th Revision) as directed by the Engineer in charge |
| 66 | Providing, laying, spreading and compacting graded stone aggregate to Wet mix macadam specification including all cost, conveyance of materials with cost of all labour, T&P etc. including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause 406 of MORT&H specification for Road and Bridge works(5th Revision) |
| 67 | Supplying and fixing of 60mm thick cement concrete interlocking paver block of M-35 grade of approved mak, design, colour and size made by block making with proper compaction laid in required pattern etc complete in all respect conforming to IRC Sp:-63-2018. |
| 68 | Providing, Fitting & Fixing of Stainless steel of 304 grade in handrailing of 50mm dia of 2mm thick circular pipe with balustrade of size 32mmX32mm X2mm @ 0.90mtr. C/C and stainless square pipes bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance of Materials, Labour, TandP etc required for the complete in all respect and as per specification & direction of Engineer-in-charge |
| 69 | EI works - Recessed wiring to light point/ fan point/Exhaust fan point/Call bell point with 1.5sqmm FRLS PVC Insulated single core multistarand copperConductor of ISI marked with 20mm dia non metalic PVC conduit with 6A 250V MODULAR type switch ISI marked and ceiling rose marked mounted on Modular GI Box having front modular base plate of suitable size, with 1.5sqmm FR PVC Single core multistrand copper conductor as earth wire includingall accessories and connection as per direction of Engineer in charge (Make of wire Finolex / Havells /Polycab) (PVC Conduit Make: AKG, Sudhakar, Precision) (switch /socket/modular GI Board (Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta)) light point Group-A L.P-62 |
| 70 | Group B L.P- 72 F.P- 22 |
| 71 | Group-C L.P- 86 F.P-28 E.F.P-16 |
| 72 | Recessed wiring to 6 AMP Modular socket out let with 2x1.5sq mm for FRLS PVC insulated single core multistrand copper conductor of ISI marked in reccess 20mm dia non metalic PVC conduit Modular GI Box and earthing point with 1x1.5sqmm FR PVC insulated single core multistarnd copper conductor for loop earthing etc,as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells /Polycab) switch /socket/modular GI Board Separate Point (Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta)) On existing Board |
| 73 | S/F of metal Box of 180mm x100 X 60 mm nominal size in recess with suitable size of phenolic laminated sheet cover infront including providing and fixing of 5 pin,15/16 Amp Modular socket out let and 15/16 Amp Modular switch ISI marked connection painting etc as required complete in all respect as per direction of Engineer in charge (Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta)) |
| 74 | Recessed wiring to 6 AMP Modular socket out let with 2x1.5sq mm for FRLS PVC insulated single core multistrand copper conductor of ISI marked in reccess 20mm dia non metalic PVC conduit Modular GI Box and earthing point with 1x1.5sqmm FR PVC insulated single core multistarnd copper conductor for loop earthing etc,as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells /Polycab) switch /socket/modular GI Board Separate Point (Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta)) |
| 75 | S/F of 5 / 6 amps, 2 way modular switch, ISI marked (Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta)) |
| 76 | S/F of Multipurpose board consisting 3nos. 6Amp plug and switch and 1 No of 15/16amp plug and switch Modular on metal box and Modular cover with all connections( Legrand mylinc/ Schneider clipsal/Hager insysta) (computer Board) |
| 77 | Recessed Extra lead Sub-main wiring for light and fan point in 2x1.5mm2 FR PVC insulated single core multistrand copper conductor of ISI Marked confirming to IS-694/1990 in 20mm dia nonmetalic heavy duty conduit 1.6 sqmm thick along with 1x1.5 sqmm FRLS PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge(Make of wire Finolex / Havells /Polycab) 2x1.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990 |
| 78 | Recessed wiring to Sub-main in 2x2.5 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 1x1.5sqmm FRLS PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells /Polycab) 2x2.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990 |
| 79 | Recessed wiring to Sub-main in 2x4 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 1x1.5sqmm FRLS PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells /Polycab) 2x4 sq mm+1x1.5 sqmm 1100 Volts confirming to IS 694/1990 |
| 80 | Recessed wiring to Sub-main in 2x6 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 25mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 2x2.5sqmm FRLS PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells /Polycab) 2x6 sq mm+2x2.5 sqmm 1100 Volts confirming to IS 694/1990 |
| 81 | Recessed wiring to Sub-main in 4x10 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 32mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 2x4sqmm FRLS PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells /Polycab) 4x10 sq mm+2x4 sqmm 1100 Volts confirming to IS 694/1990 |
| 82 | Supply and fixing of 20watt,CW/WW 5700K,1800 Lumen led Aluminium Housing batten on wall ,making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Panasonic/ Great white/ Orient/ wipro/ Havells/Phillips)(2Years Warranty) |
| 83 | SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years |
| 84 | Supply and fixing of 9 watt,CW/WW 6500K,1800 Lumen led bulb on wall ,making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Panasonic/ Great white/ Havells/ wipro) |
| 85 | S/F of Bakelite angle holder/batten holder of ISI marked including connection etc as required .(Make - Cona/ Anchor/ Greatwhite) |
| 86 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.. .(With fan Regulator) |
| 87 | Supply and fixing of 48 inch / 1200mm A.C. Celling Fan High speed metalic colour ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Usha/Orient/Crompton/Almonard/Khaitan) |
| 88 | Supply and fixing of Electronics step type Modular fan regulator. ( Legrand mylinc/ Schneider clipsal/Hager insysta/Anchor Dura /or equivalent) |
| 89 | Supply & fixing of 10W LED BULKHEAD LIGHT (Make : Panasonic/ Great white/ Orient/ wipro/ Havells/Cona/Surya) |
| 90 | S/F of Call Bell /Buzzer ISI marked suitable for AC/Dc single phase 230 V complete . |
| 91 | Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor in existing surface/ recessed/ STEEL / PVC conduit as required.1 X 1.5sqmm Inverter Wiring |
| 92 | S/F of 12 inch Heavy duty (Metalic Colour) Exahust Fan with wall cutting, S/F of proper size of hume pipe, concreating, plastaring, painting with all connection testing and commissioning complete in all respect as per direction of Engineer in charge(Make:- Almonard / Usha/Orient/Khaitan,V-guard) |
| 93 | S/F of A.C. point consisting of 32 amp industrial male female socket &top with 20-32 amp single phase starter with all connection complete in all respect as per direction of engineer incharge (Make: legrand (Myrius)/schneider) |
| 94 | Supply and fixing of 18 watt Surface Light ,making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Panasonic/ Great white/ Orient/ wipro/ Havells/Phillips)(2Years Warranty) |
| 95 | Supply and fixing of 6 watt LED Spot Light ,making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Panasonic/ Great white/ Orient/ wipro/ Havells/Phillips)(2Years Warranty) |
| 96 | S/F of Street light-ENDURA 90W CITYLINER NEO new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years |
| 97 | Fixing of Street light with G.I bracket and pipe |
| 98 | S/F of Gate light light-ENDURA 25W CITYLINER NEO new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years |
| 99 | Supply and Installation of 2300 Watt 24 Volt Inverter LED DisplayTurbo mode to increase output voltage Support single batteryCompatible with Tubular Flat plate & SMF (Make:- Luminous / Liv fast) |
| 100 | Supply and Installation of Battery 220 Ah capacity, 12V, Warranty - 48* Months Tubular Technology battery – Robust Tubular plates Low antimony alloy used for low maintenance Suitable for areas with frequent and long power cuts Excellent overcharge tolerance (accepts very deep discharge-suitable for areas with long power cut) Factory charge battery in ready to use condition (Make:- Luminous /Livfast) |
| 101 | Supply & Installation of Battery rack for inverter |
| 102 | Supply and fixing of 1.5ton Split AC (Make-Carrier(CAI18EL3R32F0)/ Voltas(SAC 183V Vertis Emerald) / Hitachi(RAS.X31SPCAISI-95026399) |
| 103 | Supply and fixing of 130volt to 300volt 4 KVA Stabilizer. Make-V-Guard |
| 104 | Supply & fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/ recess complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc as required (but without MCB/RCCB/ Isolator) ( make - Legrand Ekinox3 ETPN/ Scinder Acti 9/ L&T) 12Way DDDB |
| 105 | Supply & fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/ recess complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc as required (but without MCB/RCCB/ Isolator) ( make - Legrand Ekinox3 ETPN/ Scinder Acti 9/ L&T) 6Way DDDB |
| 106 | Supply and fixing of SP 6-32 A, 10 KA rating 240 V \\"C\\" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand (DX 3)/siemens (Betaguard) /Hager) |
| 107 | 63A DP MCB |
| 108 | S/F of 4 way TPN (8+12) MCB DB on existgsurface / wall mounting with all connection complete in all respect as per direction of engineer incharge (Make : Schneider (ACTI 9 ) /legrand (Ekinox 3) /siemens (Betaguard)) |
| 109 | Supply and fixing of 40 to 63A 4P MCB |
| 110 | 6 to 32 DP MCB |
| 111 | Supply,Installation, testing, Commissioning 63Amp INDOOR panel board with danger board (Head Main Panel) 16/18 SWG panel box 36×24×12= 10368 sq.inch for single door made out of CR sheet of 16SWG and border angle frame to provide above pannel with proper spaces, hinges and other accessories, hinged door must be painted one coated red oxide and two coat enamel gray paint(2 nos) |
| 112 | Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connection 36×24× including cost of copper conductor and other fittings like gasket, screw, nut and bolt, insulating materials(2 nos) |
| 113 | Providing and fixing 25mm x 5 mm copper strip on surface or in recess for loop earthing along with existing surface / recessed conduit with all connection complete in all respect as per direction of engineer incharge |
| 114 | Supply and fixing of 4 pole MCCB 63-100A,Ics = 100% Icu, 16 KA breaking capacity, adjustableThermal,fixed magnetic type in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand (DX 3)/siemens (Betaguard) /Hager) |
| 115 | Supply and fixing of 4 pole 63AMP changeover in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand /siemens (Betaguard) /Hager/L&T) |
| 116 | Supply and fixing of Digital Meter Displays Current, line to neutral & line to line Voltages, frequency & Power Factor. (VA & PF - Phase Wise & Average) IEC 62053-21 complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand (DX 3)/siemens (Betaguard) /Hager) |
| 117 | Supply and fixing of 6 amp to 32 amp rating 240 V \\"C\\" series miniature circuit breaker suitable for 32A DP MCB inductive loads of the following poles in the existing MCB DB ISI marked complete with connections inductive loads of the following poles in the existing MCB DB ISI marked complete with connections (Make : Schneider (ACTI 9 ) /legrand (DX 3)/siemens (Betaguard) /Hager) |
| 118 | S/F OF MAIN SWITCHES ISI Marked 32 Amp ICDP (Make-Cona/ Anchor) |
| 119 | S/F of 25Amp modular single phase starter with 32Amp TP connector for AC machine power point incl. all connection (Make:Cona/Havells/Panasonic (Akina) /Anchor ( Roma Plus)) |
| 120 | S/F of Street light-ENDURA 45W CITYLINER NEO new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years |
| 121 | Fixing of Street light with G.I bracket and pipe |
| 122 | Supply & Fixing of 6sqmm Service Wire |
| 123 | Supply and fixing of Earthing with G.I earth pipe 3mtr. long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required |
| 124 | Extra for using salt & charcoal for G.I or copper pipe earth electrode as required. |
| 125 | Supplying & laying 8 SWG copper wires ISI marked at 0.5 meter below ground level for conductor earth electrode including soldering etc. as required. |
| 126 | Supplyn & fixing of Allm.cables armoued XLPE insulated 3.5Cx25sqmm |
| 127 | Supply and fixing copper plate earthing 600 mm X 600 mm X 3.15 mm thick ISI marked including accessories and providing masonary with charcoal and salt with all connection complete in all respect as per direction of engineer incharge |
| 128 | Supplying and laying 25mm X 5mm copper strip on surface or in recess for connection etc as required. |
| 129 | CCTV:Supply & Fixing of Network WDR 4 MP IR built in MIC Bullet/Dome Camera.Image Sensor 1/3” 4 Megapixel progressive CMOS. Number Of Pixels(H × V) 2560 x 1440. Minimum Illumination 0.005 Lux/F1.6(color,30IRE), 0 Lux with IR ON. IR Distance Up to 50m, depending on scene refl ectance. Compression H.265 / H.264 / Smart Codec / MJPEG (Sub Stream). Resolution 4M (2688 x 1520). (Make: SONY Honeywell,Hikvision, Axis, CP Plus) |
| 130 | Supply and laying of Cat6 4-pair 23AWG LSZH UTP Cable in existing conduits/trunking. Make: Tyco-AMP/ Legrand/ Digisol. |
| 131 | Supply and laying of 20mm pvc conduit in complete as per the direction of engineer incharge . Make: AKG |
| 132 | Supply & Fixing of 8 Channel NVR Make: (Honeywell/Dahua/Hikvision/CP Plus) |
| 133 | Supply & Fixing of 8 Port 10/100/1000Mbps PoE( Giga Switch . Make: Cisco/HP/Digisol |
| 134 | PoE Switch Box |
| 135 | SITC of 4U RACK Rack DIN standardConstruction : WeldedFront Door Lockable Toughened Glass DoorBasic Frame SteelEquipment 19” Mounting angles made of formed steelStandard. Powder CoatedTop and Bottom Welded to Frame, Vented and Field Cable entry exit cut outsStandard Color : Grey or BlackStatic Load : 25 kgs.(MAKE:Legrand/D-LINK /Equivalent as per direction of E.I.C.) |
| 136 | RJ 45 Connector |
| 137 | Supply & Fixing of Survaince HDD 4 TB make : Segate |
| 138 | Supply & Fixing of 25mm C Clips |
| 139 | 1000VA UPS (Make- Microtek) |
| 140 | HDMI Extender 120 Mtr |
| 141 | HP Wireless Mouse |
| 142 | Supply and fixing of 32\\" IPS 4k Ultra HD Display with 440 NITS, 1200:1 Contrast Ratio, android professional display in complete as per the direction of engineer incharge. Make: Sony ,Samsung,LG |
| 143 | LIGHTNING ARRESTER:Supply , Installation, Testing & commissioning of Air Terminal ESE -30. Air Terminal comprised of separate electrically isolated dual copper panels surrounding an Earthed central finial should be coated with chrome for environmental protection.The upper section of the central finial shall be rated to withstand 40KA impulse current and it should be made up of solid brass rod and its length should be more than 85mm above the surrounding panels.(Make:ABB/Stromking/ Satalite-3/Indilac/Eq.) The mounting pole used to support the lightning air terminal shall either be a supporting mast or Free standing mast at a ideal height of 03 metres above to be area protected or as per required level of protection. If any height restrictions are there then min height should be 2mtr but radius of protection will change according to height.(Make:ABB/Stromking/ Satalite-3/Indilac/Star X) Supply& install of 30 meter 70sq.mm cross section down conductor of single core flexible Copper cable made of min.990Nos copper strands of 3mm dia and having PVC insulation of min. 3mm thickness and overall dia of 16mm. It should be fixed using SS/GI saddles & fixtures every 0.5mtr Maintenance free Safe Earthing Electrodes with ISI G.I. pipe dia60mm as Secondary electrode with wall thickness of 2.6 mm and the Primary Earthing Electrode will be 32mm X 6mm X 1no M.S. hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the Primary Earthing and the secondary Earthing, the Surface Area in mm will be 5,65,200 for 3mtrs length and Cross Sectional Primary conducting area is 192 sq.mm.Ground Filling Compound filled surrounding to earthing electrode. It should absorb the moisture from surrounding area and it should be non corrosive in nature. It should maintain the constant ohmic value for long life. It should be supplied in packing of 25kgs bag.Lightning Strike Recorder (L.S.R.): Supply of Australian make L.S.R. It should be non electronic& non- resettable type having 7 digits display &enclosed in an IP-67 enclosure with minimum sensitivity of 1000A & maximum capacity of 220KA tested on 8/20 micro second wave from as per IEC 60-1: 1989. It should be non electronic type and does not require external power supply for working. Supplier should do on site testing of LSR, where impulse generate should be used to show working of LSR. After impulse current passing through LSR it should change the counter reading. The entire LA system should be Replacement Warranty will be 5 years |
| 144 | External Illumination: Supply of 07 mtr. high Octagonal G.I.(Galvanization with 90 Micron) PU Painted pole shall be designed to withstand the maximum wind speed as per IS 875. The top loading i.e. area and the weight of fixtures are to be considered to calculate maximum deflection of the pole and the same shall meet the requirement of BSEN 40-3-3:2003. Octagonal poles made from HT Steel Conforming to grade S355 & having thickness of 3mm. Top dia 70mm & bottom dia 155mm single sharp welding with base plate dimension 260x260x16mm & base plate must be Fe 410 conforming to IS 2062, Foundation bolts must be 4x24mm dia, PCD 260mm, bolt length M24X750mm long , The Pole shaft shall have octagonal cross section and shall be continously tapered with single longitudinal welding. There shall not be any circumferential welding. The welding of pole shaft shall be done by Submerged Arc Welding process. The poles shall be hot dip galvanished in single dipping as per BS EN ISO 1461 standards with average coating thickness of 80 micron ( Make- Bajaj/Consoul/ Valmont/Lyshat) |
| 145 | Supply & Installation of Semi Integrated 60 Watt LED Street Light (Make- Havells/Panasonic/Phillips/Crompton) |
| 146 | Fabrication, transportation and supply of 9m hot dip galvanized Decorative Arm octagonal pole to >70 micron with integral control box, 6A MCB-1NOS(Make- SIEMEN/LEGRAND/ABB/L&T) , suitable boards with bakellite sheet and cable termination arrangement 1.5m length Decorative Sward type Single arm special bracket 1000mm bracket made with galvanized 50mm dia pipe to withstand the wind speed of 180km/hr along with template including all required accessories. Steel used to manufacture poles must be as per BSEN 10025 grade S355. YIield strength : min 355N/SQ.MM, Tensile strength : 490-630 N/SQ.MM. DIMENSIONS: Top dia75 mm , bottom dia not less than 155mm, sheet thickness not less than 3 mm, base plate dimensions not less than 250mm×250mm×16mm, foundation bolt (steel grade EN8) having J-Bolt size not less than 4Nos × 24mm dia, pitch circle dia not less than 250mm, bolt length not less than 700mm , projected bolt length not less than 100mm.(make-BAJAJ/Valmont/Transrail)(9mtr Octagonal pole + foundation bolt) including Decorative Sward type/ design as per R&B approval Single (1.5 mtr length) . |
| 147 | Supply & wiring of 3C X 1.5sqmm2 PVC insulated &FR PVC fexible Cu conductor Cable,1.1KV, conforming to IS:694 required for junction box to light fitting make should be havells/Finolex/ polycab/ KEI .complete work in all aspects. |
| 148 | Foundation, erection and commissioning of street light pole and arm to proper alignment with supply of all materials such as steel reinforcement , metal, chips, cement , sand, cable entry pipe, shuttering for RCC work duly providing foundation bolt and nut with providing not less than 0.45m× 0.45m× 1.2m concrete(1:2:4) as per direction of field engineer during execution and approved drawings including labour charges, cost and conveyance of materials etc. complete. |
| 149 | S/F of earthing with G.I earth pipe 3m long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as per requirement. |
| 150 | supply and transportation of LED street light body with 120W LED streetlight made of high grade pressure die-cast aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, less glare,IP 66( Sillicon gasket ensures optical & electrical compartments are IP 66) protected , universal voltage 100-270v ac,pf ≥0.9, high power LED luminaire having efficiacy ≥ 120 lumens/watt, and junction temperature 85c, with ingress protection IP66, driver surge protection 4KV, External surge protection 10 KV, with optics distribution type II medium, THD ≤ 10% AT 110V AC, Driver efficiency ≥ 90% ,CCT: 5600K, minimum CRI≥70, inbuilt electrical protections like overvoltage,short circuit, overload, open circuit, miswiring, intelligent pole mounting option provides flexibility of vertical or horizontal pole mounting option complete with top openable maintenance and manufacture has to submit LM79,LM80. The LM 80 report must have tested > 90000 Hr testing methodology Certification : Two years replacement warrantee by the manufacturer.Valid BIS Manufacturing Certificate in the name of the OEM as per Approved Make List ‘ shall be submitted for the Model to be ‘supplied. BIS must have on the name of the OEM only. The factory licence mentioned in the BIS certificate must have on the name of the OEM only. LM-79 & LM-80 Certification of the ‘same model is also to be furnished for R&B ‘Approval. & photobiological safety report. Luminaire performance complies to IS10322(part 5/sec3) & IEC 60598-1, IEC 60529 and ISO certified company (MAKE ,Philips,Bajaj, Crompton) |
| 151 | Supply and laying of 6swg gi earthing Wire |
| 152 | Supplying, laying & testing of 1.1 KV grade XLPE power cable of size 4C x 16 SQmm - suitable for 415 Volt, 3Ph, 50 c/s supply. laid on surface including cost of shaddles/ clamps/ markers etc but excluding the cost of G.I. Pipes / HDPE pipes complete with making good to the damages as required and as per direction of Engineer-in-charge. Make : Policab/KEI/Havells/Finoex |
| 153 | Supply and Fixing of IP 20 Non-Integral flexible LED Strip light High Capability efficient diffuser 3000k with 12 watt @6 mtr pool with Driver extra asper Engg. In-Charge(Make-Philips/Panasonic/Bajaj or equievalant) |
| 154 | Supply and Fixing of 8/10watt 0.6mtr LED bamboo lights (Make- Havells/Panasonic/Phillips/Crompton) |
| 155 | Providing,fixing and laying of fallowing dia PN10 HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. 32mm dia |
| 156 | S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type IP66 based panel made out by 2mm hot dip galvanised steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR USE) with 25A TPN MCB 01 NO,1 no. Astronomical digital timer, AUTO MANUAL(with start and stop push button) SELECTOR 32 A 3P contactor, OLR,RYB,ON,OFF trip indication, Type-II SPD 40ka ,,03 nos 10A 4P MCB as outgoing Make-LEGRAND-dx3/ Siemens-Betaguard/ Schneider- Acti 9 as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 3 years of acceptance of materials |
| 157 | PH works - Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Joints all complete as per specification and direction of the Engineer in charge. 20mm dia C- PVC pipe |
| 158 | In First floor |
| 159 | 25mm dia C-PVC Pipe |
| 160 | In first floor |
| 161 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.25mm dia PVC ASTM pipe (sch-80) |
| 162 | In First floor |
| 163 | In 2nd floor |
| 164 | 32mm dia PVC ASTM Pipe (Sch-80) |
| 165 | In First floor |
| 166 | In 2nd floor |
| 167 | 50mm dia PVC ASTM Pipe (Sch-80) In 2nd floor |
| 168 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.250mm thick wall |
| 169 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing GI pipes / PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.In ground floor |
| 170 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.In ground floor |
| 171 | Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. 15mm dia CP bib cock -(Con-CHR-037KN Jaquar make) |
| 172 | 15 mm dia CP two way Bib cock (Con-CHR-041KN Jaquar make) |
| 173 | 15mm dia CP Health foucet (ALD-CHR-573 Jaquar make) |
| 174 | 15 mm dia CP Long body Bib cock(Con-CHR-107KN Jaquar make) |
| 175 | 15mm dia CP angle stop cock(Con -CHR-053KN Jaquar make) |
| 176 | 15mm dia C.P. Wall Mixture 3 in one with provision of Telephonic shower and head shower System (Jaquar)CON-CHR-217KN |
| 177 | 20mm dia CP concealed stop cock(Con-CHR-083KN Jaquar make ) |
| 178 | 15mm dia C.P. bottle trap ALD-CHR-769L300X190 Jaquar make |
| 179 | 25mm dia CPVC full way valve (Ashirvad Make) |
| 180 | 32mm dia CPVC full way Valve (Ashirvad Make) |
| 181 | 50mm dia CPVC full way Valve (Ashirvad Make) |
| 182 | 15mm dia CP flange |
| 183 | 15mm dia CP extension piece |
| 184 | Supplying all materials, labour, T&P and fitting and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of the Engineer in charge 15mm dia CP revolving shower ( Plaza make ) |
| 185 | Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge 10 litres capacity pvc low level cistern with 32mm dia CP long flush bend Slimline white |
| 186 | Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge On the roof of First floor 2000litre capacity water storage tanks |
| 187 | On the roof of Ground floor 1000litre capacity water storage tanks |
| 188 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge. 1 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.M.P with outlet dia of 32mm |
| 189 | DOL Control panel |
| 190 | 32mm dia steel short piece |
| 191 | Well cap |
| 192 | 50mm size CI bracket |
| 193 | 2.50sqmm flat cable |
| 194 | 20mm dia rigid UPVC pipes |
| 195 | Steel rope with cover |
| 196 | 32mm dia HDPE pipe |
| 197 | Labour charges for lowering including transportation |
| 198 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge 110mm dia U-PVC SWR pipe(Ashirbad / Supreeme ) |
| 199 | 110mm U-PVC door tee |
| 200 | 110mm U-PVC Plain tee |
| 201 | 110mm U-PVC door bend |
| 202 | 110mm U-PVC plain bend |
| 203 | 110mm dia U-PVC 'P' trap |
| 204 | 110mm dia U-PVC offset with out ear |
| 205 | 110mm dia U-PVC H.R. Bend |
| 206 | 110mm dia U-PVC cowl |
| 207 | 125mm dia CP grating |
| 208 | 110mm dia PVC SWR Clamp/Clip. |
| 209 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge 250mm to 375mm thick wall |
| 210 | Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge. |
| 211 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge 580mm size Orissa pan (Parryware / Nycer make ) |
| 212 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge.European water closet with ‘S’ trap plain (Parryware / Nycer make ) |
| 213 | EWC ( Hindware Make - CatNo.92091 |
| 214 | Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge . 600x450x250 mm stainless Steel kitchen sink-glossy-IS: 13983-1994(jayna make ) |
| 215 | Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge. 550mmx400mm size wash hand basin with porcelain pedestal Parryware/ Hind ware /Neyser make ) |
| 216 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted minimum 5mm thickon 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge . 600mmx450mm size B.E mirror x minimum 5mm thick(Alpina make ) |
| 217 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge Acrylic glass shelf with CP guard rails |
| 218 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mmx600mm long CP towel rail |
| 219 | C.P. Ring Towel Rail |
| 220 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder |
| 221 | Supplying all materials labour T&P and filling in foundation and plinth with sandwell watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor |
| 222 | Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor |
| 223 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor In ground |
| 224 | In Ist floor |
| 225 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor |
| 226 | In Ist floor |
| 227 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork with cement punning for skirting including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In Ist floor In Ist floor |
| 228 | Supplying all materials, labour, T&P and filling in sunken floor in toilets with cinter (light weight slag) well watered and rammed include conveyance of all materials to worksite payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In First floor |
| 229 | Supply of all materials & laying the waterproofing material of Dr.Fixit torch shield P3160(3mm)with its primer 2 coats or equivalent water proofing material after drying cleaning the concrete surface over the concrete floor/roof/ balcony/sunken and dado upto 1\\"6\\" in wall including cleaning,applying and mending as per specification including cost, conveyance, taxes, royalities of all materials to work site etc.all complete as per the direction of the Engineer-in-charge. In First floor |
| 230 | Supplying all materials, labour, T&P and providing brick work with Fly Ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In first floor |
| 231 | Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. 30 cm. x 30 cm. Kajaria / Somany / Johnson to be pree approved .In ground floor |
| 232 | In Ist floor |
| 233 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge.45cm. x 30cm. Kajaria / Somany / Johnson to be pree approved .In ground floor In ground floor In ground floor |
| 234 | In Ist floor |
| 235 | Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm.(Darwaja /Exon Door make) |
| 236 | EXTERNAL P.H. WORK Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge 110mm dia |
| 237 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge. Inside size 250mmx250mm |
| 238 | Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mmx760mmx460mm Inside size 760mmx760mmx460mm |
| 239 | ---- do --- addl depth of 0.15m upto 0.90m |
| 240 | R.C.P.C.Manhole Cover |
| 241 | Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 910mmx910mmx910mm |
| 242 | R.C.P.C.Manhole Cover |
| 243 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.20m dia x 2.00m deep soakway pit |
| 244 | Construction of 30 users RCC Septic tank ( 2nos ) Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge. |
| 245 | Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. |
| 246 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor |
| 247 | Supplying all materials, labour, T&P and providing shoring and shuttering for foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per specification and direction of the Engineer in charge |
| 248 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 249 | RCC beam,Column, girders and bressmer etc |
| 250 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor |
| 251 | Supplying all materials, labour,T&P and providing cement concrete(1:1 ½:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor |
| 252 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:3) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor (inside/outside) |
| 253 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor (inside/outside) |
| 254 | Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
| 255 | Supplying all materials, labour,T&P and providing Vent base in cement concrete(1:2:4) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 256 | Supplying all materials, labour, T&P and fitting and fixing HCI soil waste ventilating pipes and fittings to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge 110mm diameterU PVC SWR pipe(Oriplast make ) |
| 257 | 110mm dia U-PVC H.R. bend |
| 258 | 110mm dia U-PVC Cowl |
| 259 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge |
| 260 | Sinking of 125mm x 50mm dia tubewell through hand boring (water jet ) method (2nos) .Supplying all materials, labour, T&P and setting up boring equipments including erection of suitable staging for installation of the required size of tube well, dismantling and removing the same after complection of the work, including transportation of the boring equipments, cleaning and levelling the site, excavation of mud pit, channels etc, levelling of site all complete as per direction of Engineer in charge |
| 261 | Supplying all labour, T&P and transporting the boring pipes, top casing , grouting pipes, P.V.C pipes and fittings, P.V.C well screens, cement, bentonite and gravels etc to the worksite including loading and unloading etc all complete as per direction of Engineer in charge |
| 262 | Supplying all labour, T&P and drilling pilot bore not less than 102mm dia, without casing pipes in all kinds of soils and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments, extra sockets (whenever required) etc and withdrawing the boring pipes, washing and keeping the bore clear for logging if required all complete as per direction of Engineer in charge. Drilling pilot bore from 0 to 360 metres |
| 263 | Supplying all labour, T&P and reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction of Engineer in charge Reaming 100mm to 150mm dia from 0 to 360 metres |
| 264 | Reaming 150mm to 200mm dia from 0 to 360 metres |
| 265 | Supplying all labour, T&P and jointing materials and lowering the 300mm dia top casing pipes into the position and removing the same after use all complete as per direction of Engineer in charge from 0 to 360 metres |
| 266 | Supplying all labour T&P and grouting with cement slurry for saline sealing in the bore around the 150 mm dia PVC casing pipe etc all complete as per the direction of the Engineer in charge. |
| 267 | Supplying all labour, T&P and jointing materials and lowering the pvc casing pipes, fittings and well screens in position, including fitting and fixing of centraliser, cutter plug and washing the bore all complete as per direction of Engineer in charge 125mm dia PVC casing pipe from 0 to 360 metres |
| 268 | Cost of 125mm dia PVC ASTM pipe (sch-80) |
| 269 | 50mm dia PVC casing pipe from 0 to 360 metres |
| 270 | Cost of 50mm dia PVC ASTM pipe (sch-80) |
| 271 | Cost of 50mm dia PVC well screen |
| 272 | Cost of 50 mm dia C.I. cutter plug |
| 273 | Cost of bentonite powder |
| 274 | Supplying all materials, labour, T&P and packing the bore with washed gravel of river shingles of required size and specification around the well screen and pipe etc all complete as per the direction of the Engineer in charge |
| 275 | Cost and Conveyance of Gravel |
| 276 | Supplying all materials, labour, T&P and packing the bore with river sand over the gravel pack etc all complete as per the direction of the Engineer in charge |
| 277 | Cost and Conveyance of sand |
| 278 | Supplying all labour T&P and grouting with cement slurry for sanitary sealingin the bore around the upper most 3 metres of 150mm dia PVC casing pipe etc all complete as per the direction of the Engineer in charge. |
| 279 | Cost of Cement |
| 280 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge By Compressor |
| 281 | Supplying all materials, labour, T&P and constructing Bore well protection chamber of the inside size 650x650x1000hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. |
| 282 | Construction of 5000 litres under ground water storage sump- 3 Nos. Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge. |
| 283 | Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. |
| 284 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor |
| 285 | Supplying all materials, labour, T&P and providing shoring and shuttering for foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per specification and direction of the Engineer in charge |
| 286 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs up to 4.30m height |
| 287 | RCC beam,Column, girders and bressmer etc |
| 288 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor |
| 289 | Supplying all materials, labour,T&P and providing cement concrete(1:1 ½:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor |
| 290 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:3) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor (inside/outside) |
| 291 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor |
| 292 | Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
| 293 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge |
| 294 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge 1 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.M.P with outlet dia of 32mm open well Submersible pump |
| 295 | DOL Control panel |
| 296 | 2.50sqmm flat cable |
| 297 | 20mm dia rigid UPVC pipes Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender