Tender For Construction Of Kitchen Sheds In Various Govt. School Of Srinagar.(Construction Of Kitchen Shed At Ghs Kathimaidan, Construction Of Kitchen Shed At Ghs Gooripora, Construction Of Kitchen Shed At Gms Saderbal, Construction Of Kitchen Shed A
Tender Value
58.85 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
3 days left
EMD
1.17 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Kitchen Sheds In Various Govt. School Of Srinagar.(Construction Of Kitchen Shed At Ghs Kathimaidan, Construction Of Kitchen Shed At Ghs Gooripora, Construction Of Kitchen Shed At Gms Saderbal, Construction Of Kitchen Shed At Primary School Sheikh Hamzah Eidgah, Construction Of Kitchen Shed At Primary School Gandabal, Construction Of Kitchen Shed At Middle School Khawaja Bagh Maloora, Construction Of Kitchen Shed At Primary School Reshipora, Construction Of Kitchen Shed At Umerhair, Construction Of Kitchen Shed At Girls Middle School Saidakadal )(Adv. Cost Rs 58.85 Lacs) (Incl Cost Of Material+Gst)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil |
| 2 | Supplying and laying of Nallah Dry Stone Soling hand packed tightly including rammming , watering and filling of interstices including all carriages complete. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but exculding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 ( 1 cement :4 coarse sand :8 graded stone Aggregrate 40mm nominal size.) |
| 4 | Providing and laying in position of cement concrete Of specifed grade including curing but excluding the cost of centering shuttering, all works up to plinth level with 1:1:5 :3 including cost of carraige of material |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in M-10 (1:3:6) grade, with 20mm nominal size of crushed stone aggregates ,Including carraige of material involved |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°raft, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 graded crshd stne agg. 20mm nominal size all carriages of material involved & head load. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for: foundation, footings, bases of columns |
| 8 | Lintel ,beams,plinth beams ,girders ,bressumers and cantilevers |
| 9 | Steel reinforcement for R.C.C. work ready to use \\"cut and bend\\" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level. 5.22C.1Thermo-Mechanically Treated bars of grade Fe-415 or Fe-500D or more as per requirement of structural Design Including carraige of material involved |
| 10 | Brick work with common burnt clay selected bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand)Above plinth level and upto floor V level Including carraige of material involved and curing complete |
| 11 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately)Second class kail wood |
| 12 | Providing fixing 25 mm PVC Conduits I/c junction boxes fan boxes etc focomplete as desire at site of work . |
| 13 | Cement plaster in 1:6 ( 1 cement:6 fine sand ) ,12 mm thick. |
| 14 | Providing and laying of 2mm wall putty of approved brand and manfacture of two or more coats including cost of scaffolding & material for complete job |
| 15 | Providing and fixing glazed shutters for doors, windows and clerestory window using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class Kail wood |
| 16 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge 35mm thick Second class Kail wood |
| 17 | Providing & fixing Decorative ply wood both side decorative veneer (type 1) conforming to IS 1328 BWR type |
| 18 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 19 | Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutter(Area of opening for glass panes excluding portion inside rebate shall be easured) |
| 20 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content with water thinnable cement primer on wall surface having VOC content less than 50 grams/liter |
| 21 | Finishing walls with exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm |
| 22 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. (Two Coats) |
| 23 | Painting with Ready mixed synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 24 | Cement concrete flooring 1:2:4 (1Cement:2 coarse sand :4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cast of nosing of steps etc complete 50mm thick with 20mm nominal size stone aggregate crushed |
| 25 | Providing and fixing of the following hardware fittings. Tower Bolts 100mm |
| 26 | Tower Bolts 150 mm for door |
| 27 | Handle 125 mm |
| 28 | Aldrop 250 MM |
| 29 | Structural Steel work welded in built up sections trusses and framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete. welded .Including carraige of material involved |
| 30 | Providing and fixing precoated ( HI -RIB ) galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including all lifts,leads and carriages including ridges and hips all complete |
| 31 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately |
| 32 | Sanitary and Plumbing Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.including cost of PPR fittings like tee,elbow,sockets etc complete job.including cost of all PPR fittings like male ,female,socket,elbow,tee,union etc complete job.PN-16 pipe ,-25mm OD(SDR-7.4) |
| 33 | PN-16 pipe , -32mm OD(SDR-7.4) |
| 34 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : 11.66.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 35 | Providing and fixing of kitchen sink of Approved Brand and Manfacture directed by EIC. |
| 36 | Providing and fixing of thermo heated water storage gyser of approved brand havels or equilvent including all nessacarry fitting 50 ltrs |
| 37 | Providing and fixing of Sink Mixer along with waste pipe of approved brand as directed by EIC. |
| 38 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 39 | Providing and fixing of pvc prince pipes ( prince /finolex /jindal make ) pipes ( type B ) in proper graident in excavated trenches including jointing and refilling the excavated material complete including cost of excavation. |
| 40 | Providing and fixing of following pvc fittings. ( prince /finolex /jindal make ) |
| 41 | Dry Rubble masonary with hard stone in foundation and plinth using quarry stone with bond stones. |
| 42 | Lighting point (one lighting point includes wiring of lighting point in 1.5 sq.mm PVC insulated copper wire and 2.5 sq.mm PVC insulated multistrand copper wire,6 amp one way swittch6 amp S pole MCB,10 amp DP MCB,2 way DB MCB and hylem sheet with 16/15 Watt LED surface lights.including cost of channelsas per requirement.One point controlled by one 6 amp switch.( upto 10 meters)including Placing and fixing in position 25mm PVC Conduit pipes with necessary bends and other fittings in RCC Work |
| 43 | Heating point (one heatting point includes wiring of lighting point in 2.5 sq.mm PVC insulated copper wire and 4.00 sq.mm PVC insulated multistrand copper wire,16 amp one way swittch,10 amp S pole MCB,2 way DB MCB and hylem sheet.including Placing and fixing in position deep junction of cast iron with network Conduit pipes with necessary fittings in RCC Work. |
| 44 | Providing and fixing one fan point includes wiring for lighting points in 1.5sqmm pvc insulated copper wire and 2.5sqmm pvc in multi -strant copper wire 1200mm ceilling fan electronic fan dimmer.6Amp s pole MCB-10AMP DP MCB 2 Way DB for housing MCB or lightting circuits and hylem sheet.including Placing and fixing in position Fan clamp boxes with MS Fan clamps connected with network Conduit pipes with necessary fittings in RCC Work |
| 45 | Carriage 20km Aggregate Sand |
| 46 | Bricks Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender