Tender For Repair And Upgradation Of Gi-Hci In House No.111 (Type-Vi) Sector -24, Chandigarh. (Ch To: 2216 (N.P.) maintenance And Repair )
Tender Value
2.45 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
0 days left
EMD
4917
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Upgradation Of Gi-Hci In House No.111 (Type-Vi) Sector -24, Chandigarh. (Ch To: 2216 (N.P.) maintenance And Repair )
BOQ
| Sl. No. | Item Description |
| 1 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, all depth including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : DSR 2.10 |
| 2 | Pipes cables etc. not exceeding 80mm dia as per DSR No. 2.10.1.1 |
| 3 | Pipes cables etc. exceeding 80mm dia but not exceeding 300mm dia as per DSR No. 2.10.1.2 |
| 4 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in : DSR 6.4.1 |
| 5 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 |
| 6 | 12 mm cement plaster of mix as per DSR 13.1 |
| 7 | 1:4 (1 cement: 4 fine sand) as per DSR 13.1.1 |
| 8 | Providing and fixing white vitreous chinawarecloset squatting pan DSR 17.13 |
| 9 | Orissa pattern W.C. pan of size 580 mm DSR 17.13.2 |
| 10 | Providing and fixing soil, waste and vent pipes : DSR No. 17.35 |
| 11 | 100 mm dia. DSR 17.35.1 |
| 12 | Sand cast iron S&S pipe as per IS: 3989. DSR 17.35.1.2 |
| 13 | 75 mm diameter : DSR 17.35.2 |
| 14 | Sand cast iron S&S pipe as per IS: 3989 DSR 17.35.2.2 |
| 15 | Providing and fixing plain bend of required degree. DSR No. 17.39 |
| 16 | 100 mm dia as per DSR No. 17.39.1.2 |
| 17 | Providing and fixing heel rest sanitary bend as per DSR 17.40 |
| 18 | 100 mm dia as per DSR 17.40.1.2 |
| 19 | Providing and fixing collar DSR No. 17.57 |
| 20 | 100 mm dia as per DSR No. 17.57.1.2 |
| 21 | 75 mm dia as per DSR No. 17.57.2.2 |
| 22 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : DSR No. 17.60 |
| 23 | 100 mm inlet and 75 mm outlet DSR 17.60.2.1 |
| 24 | P/F of G.I. pipes compelte with G.I. fitting and clamps including making good the wall etc. |
| 25 | 20 mm dia nominal bore DSR 18.10.2 |
| 26 | 32 mm dia nominal bore DSR 18.10.4 |
| 27 | P/F of G.I. pipes compelte with G.I. fitting and clamps including making good the wall etc. Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall DSR 18.11 |
| 28 | 15 mm dia nominal bore DSR 18.11.1 |
| 29 | 20 mm dia nominal bore DSR 18.11.2 |
| 30 | P/F of G.I. pipes compelte with G.I. fitting s including trenches & filling etc as per DSR No. 18.12 |
| 31 | 20 mm as per DSR 18.12.2 |
| 32 | Providing and fixing of Gun-Metal Peat Valve |
| 33 | size 20mm DSR 18.17.1A |
| 34 | Providing and fixing uplasticised PVC connection pipe with brass unions :DSR No. 18.21 |
| 35 | 15 mm nominal bore DSR 18.21.2.1 |
| 36 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR No. 18.46 |
| 37 | 15 mm nominal bore DSR 18.46.1 |
| 38 | Cutting holes up to 30x30 cm in walls including making good the same: DSR No. 18.76 |
| 39 | With F.P.S. bricks DSR 18.76.1 |
| 40 | Cutting holes up to 15 x 15 cm in R.C.C. floore and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 including finishing complete so as to make if leak proof. DSR No. 18.77 |
| 41 | Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) size 4\\" dia of approved make |
| 42 | Providing and fixing of G.I. elbow 80 mm x 32 mm of approved make. |
| 43 | Construction of Curb consisting of cement concrete 1:2:4 including cost of sand bajri etc. |
| 44 | Providing and fixing drip seal joint |
| 45 | 100 mm dia. |
| 46 | 75 mm diameter : |
| 47 | Providing and fixing Single 3-inlet Divertor Exposed parts kit Make Jaquar Range concealed part ALD-193 or equivalent model of approved make to the satisfaction of EIC |
| 48 | Providing and fixing concealed stop cock complete with internal part body make jaquar + 083 or equivalent model of approved make to the satisfaction of EIC |
| 49 | Providing and fixing of Slim Concealed Cistern Body with drain pipe connection set for Wall Hung WC complete Jaquar JCS 2400S or equivalent model of approved make to the satisfaction of EIC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender