Tender For Cable Connection Of Dg Set In Newly Constructed Building Of The Dept. Of Molecular & Human Genetics And Electrical Renovation Work Including Replacement Of Old Power Sockets In Algal Culture Room, Old Building In Department Of Botany, B.H.
Tender Value
2.78 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
0 days left
EMD
5570
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Varanasi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Cable Connection Of Dg Set In Newly Constructed Building Of The Dept. Of Molecular & Human Genetics And Electrical Renovation Work Including Replacement Of Old Power Sockets In Algal Culture Room, Old Building In Department Of Botany, B.H.U.
BOQ
| Sl. No. | Item Description |
| 1 | Electrical Work for Dept. of Molecular & Human Genetics. |
| 2 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 95 sq. mm (45mm) |
| 3 | Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 95 sq. mm |
| 4 | Supplying and fixing of light class G.I. pipe of 100 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required. |
| 5 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 35 sq. mm and upto 95 sq. mm |
| 6 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 7 | Dismantling and removing the existing LT power cable of given size from open cable duct/trench, including disconnecting from both ends, careful retrieval without damaging reusable cable (where required), removal of cable cleats/clamps, dressing, coiling, stacking at the designated location or as directed by the Engineer-in-Charge, including all labour, tools, tackles and incidental charges, complete. |
| 8 | Supply of 1.1 kV grade XLPE insulated, PVC sheathed, armoured, aluminium conductor,conforming to relevent IS, complete as required. 3.5x95sqmm Aluminium Cable |
| 9 | Supply, installation, testing and commissioning of On Load Changeover Switch (Manual), 4 Pole, 200 Ampere, suitable for 415 V AC, 50 Hz, three-phase four-wire system, enclosed in a sheet steel powder-coated enclosure with front operating handle, providing safe transfer of load between two power sources without interrupting the load. |
| 10 | Electrical Work for Algal Culture Room, Dept. of Botany. |
| 11 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C |
| 12 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2x1.5 sqmm + 1x1.5 sqmm earth wire |
| 13 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3x4.0sqmm |
| 14 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.6x4.0sqmm |
| 15 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. PVC Conduit 20mm |
| 16 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. PVC Conduit 25mm |
| 17 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2x6.0 sqmm + 1x6.0 sqmm earth wire |
| 18 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4x10 sqmm + 2x6 sq mm earth wire |
| 19 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. |
| 20 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 21 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required. |
| 22 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. 6 way (4 + 18), Double door |
| 23 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. SPMCB (5-32A) |
| 24 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A |
| 25 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 26 | Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required. For 6 way, Double door TPN MCBDB. |
| 27 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 28 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 29 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 30 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm) |
| 31 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet |
| 32 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3 ½ x 25 sq. mm (28 mm) |
| 33 | Supply of 1.1 kV grade XLPE insulated, PVC sheathed, armoured, aluminium conductor,conforming to relevent IS, complete as required. 3½ core × 25 sq. mm cable |
| 34 | Providing and fixing 2' × 2' LED light fittings, suitable for recessed / surface mounted / suspended installation, complete with aluminium housing, high efficiency LEDs, glare-free diffuser/optical system, constant current electronic LED driver, suitable for operation on 230 V, 50 Hz AC supply, power factor ≥ 0.90, CRI ≥ 80, colour temperature 4000K–6500K, system efficacy not less than 100 lm/W, complete with all mounting accessories, suspension arrangement wherever required, connections, testing and commissioning, as required, Make- Crompton/Wipro/Phillips |
| 35 | Providing and fixing 400 mm sweep energy efficient wall mounted fan, suitable for 230 V, 50 Hz AC, speed not less than 900 RPM, complete with oscillating mechanism, speed control arrangement, aerodynamically designed blades, protective guard and all necessary wall mounting accessories, including connection, testing and commissioning, complete as required. Make- Crompton/Bajaj/Usha |
| 36 | Providing and fixing of 18 Watt Round light fitting with extruded aluminium housing/body, complete with high efficiency LEDs, integral electronic driver, polycarbonate diffuser, suitable for 230 V, 50 Hz AC, having system efficacy not less than 100 lm/W, CRI ≥ 80, power factor ≥ 0.90, correlated colour temperature (CCT) 5700–6500 K, with suitable surge protection, complete with mounting accessories, connection, testing and commissioning, complete as required. Make- Crompton/Wipro/Phillips. |
| 37 | Dismantling of old existing wiring, TPN switch and associated accessories, and relocation/reinstallation of TPN switch at suitable location as per site requirement and direction of Engineer-in-Charge, including necessary connection, dressing of cables, minor civil works, testing and commissioning complete.” |
| 38 | Buyback of existing old/unserviceable wiring, cables, conduits and associated electrical materials from site after dismantling, including safe removal, loading, transportation, and proper accounting as per direction of Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender