Tender For Patch Repairing Works To The Damaged Portion Occurred Due To Heavy Rainfall Of Shibpur Bawrah Road In Different Stretches From 5.50 Km To 7.20 Km Under Cooch Behar Division, P.W.Dte.
Tender Value
9.97 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
8 days left
EMD
19956
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coochbehar → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Patch Repairing Works To The Damaged Portion Occurred Due To Heavy Rainfall Of Shibpur Bawrah Road In Different Stretches From 5.50 Km To 7.20 Km Under Cooch Behar Division, P.W.Dte.
BOQ
| Sl. No. | Item Description |
| 1 | Restoration of Rain CutsRestoration of rain cuts with soil, moorum, gravel or a mixture of these, clearing the loose soil, benching for 300 mm width and extending continuously for a sufficient length and height of benchesshallbeintherangeof150 300mm. Fresh material shall be deposited in layers not exceeding 250mmandcompactingwithplate compactor orpower rammersorby suitable implements handled manually to restore the original alignment, levels and slopes as perthe requiremnt of MORT&H's specification 3002. |
| 2 | Maintenance of Earth Shoulder (stripping excess soil)Stripping excess soil from the shoulder surface to achieve the approvedlevelandcompactingwith plate compactor as per the requirement of MORT&H'sspecification 3003. |
| 3 | Water Bound MacadamProviding, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniformthickness, handpacking, rollingwith3wheeledsteel/ vibratory roller 8-10 tonnes in stages topropergradeandcamber,applying and brooming requisite type of screening/bindingMaterials tofillup the interstices of coarse aggregate, watering and compacting to the required density (Reference to MoRT&H's specification 404).9A- By Manual Means9A(ii)Grading-2 (Table 400-9) b) Using Screening (Table 400-10) Type-B (11.2 mm aggregate) |
| 4 | Prime Coat. Providing and applying primer coat with cationic bitumen emulsion SS1 grade conforming to IS:8887 on prepared porous granular surface including clearing of road surfaceand spraying primer using mechanical means (Reference toMORT&H's specification clause 502).i)On WMM/WBM surface @ 0.70-1.0kg /sqm. |
| 5 | Repairing Pot-holes with Bituminous Macadam (Grading-II, for compacted thickness of upto 75mm)Filling Pot Holes with Bituminous Macadam using Mobile Hot Mix plant (6-10 TPH) with approved crushed aggregates of specified grading premixed with bituminous binder @3.4% by wt. of the total mix, transported to site and laid in the pot hole prepared before hand by cutting the edges to get a firm vertical face and by removing all the failed and loose aterials including dust and applying tack coat evenly onthe sides and on the surface as per specification, rolling the filled depressionwith 8-10 tonne smooth wheeled roller toachieve the desired compaction, including the cost and carriage of stone aggregates and bitumen, hire charges of machinery and equipment, cost of fuel and lubricants andwages of all operational staff, quality control except the cost of tack coat complete as per direction of Engineer-in- harge. Payment to be made on the basis of the loose net volume of the stone aggregates used in the work. |
| 6 | Tack CoatProviding and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).i)On bituminous surface @ 0.20kg-0.3kg /sqm. |
| 7 | Tack CoatProviding and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).ii)On Granular surface treated with primer @ 0.25kg-0.30 /sqm. |
| 8 | Open - Graded Premix SurfacingProviding, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen ofapproved grade to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled tandem or other approved type roller 8-10 tonnecapacity, finished to required level and grades (Reference to MORT&H's specification clause 510).Case - I: Mechanical method using approved grade Bitumen and HMP of appropriate capacity not less than 75 tonnes/hour |
| 9 | Seal CoatProviding and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type A and B seal coats (Reference to MORT&H's specification clause 511) Case - II : Type BProviding and laying of premix sand seal coat with HMP using approved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade. |
| 10 | Construction of Subgrade and Earthen ShouldersConstruction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 (Reference to MoRT&H's specification clause 305). |
| 11 | ADD GST @ 18.00% ON SUM OF AMOUNT Sl-01 to SL-10 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender