Tender For Repair To Flooring Joinery Plumbing And Other B/R Works At Kalimpong Mil Stn Under Ge 867 Ews
Tender Value
20 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
11 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kalimpong → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Flooring Joinery Plumbing And Other B/R Works At Kalimpong Mil Stn Under Ge 867 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Chowkhats or frames with shutter without taking off shutters from the frames exc 1.5 sq. m but n exc 4 sq. m each. |
| 2 | Taking down Chowkhats or frames with shutter without taking off shutters from the frames not exc. 1.5 sq. m each. |
| 3 | Taking down shutters of any description area exc 1 sqm and n exc 2 sqm each complete all as specified. |
| 4 | Taking down shutters of any description area not exc 1 sqm each complete all as specified. |
| 5 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in same opening after Resecuring or easing & adjusting complete all as specified. |
| 6 | S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered , put together with glue, pinned at joints complete all as specified and directed. |
| 7 | S&F 105x60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including filling with PCC (1:3:6) type C0 complete as specified, supplied and fixed all as specified and as directed. |
| 8 | S&F 125 x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.including filling with PCC (1:3:6) type C0 complete as specified, supplied and fixed all as specified and as directed. |
| 9 | S&F 35 mm thick second class hard wood , plain, framed panelled shutters (any number of panels), with panels of 12 mm thick timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density wood particle board with commercial face veneers complete all as specified and directed.Note :- The dimension of the various components or parts of shutters shall be as specified in SSR Part I,Section 8,clause 8.24 (a) fitted to chowkats all as specified and directed. |
| 10 | S&F 35 mm thick second class hard wood, glazed and Skelton shutters, open rebated and prepared to receive glass, gauge, etc , divided into squares, with plain chamfered or rounded, mitred and without sash bars, edges of framing plain, chamfered or rounded with cut mitred beds for securing glass etc, supplied and fitted to chowkhats complete all as specified and directed.(Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I) |
| 11 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain color PVC sheet reinforced with M.S. square tube,supplying & fixing in opening as per specification & drawing complete all as specified. |
| 12 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 13 | S&F for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 14 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 15 | S&F Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminiu snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21,100mm long (2 no.) suitable handle (1no.) complete all as specified. |
| 16 | S&F Anoidised Aluminium grill (Anodised transperent or dyed to required shade according to IS :1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to existing window frame with C.P brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in charge. |
| 17 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 18 | Supply and fixing factory made uPVC wood grain colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated).Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (powder coated) [and including 5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connectedaccessories. Net opening will be measured for payment purpose.) |
| 19 | Supply and fixing Providing and fixing factory made uPVC wood grain colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, lever door handle,3D hinges,Striker,glazing bridge,silicon sealant,doorespag etc hardware[Touch Lock of zinc alloyed ( powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each |
| 20 | S&F steel window with side hung shutters (Glazed or wire mesh shutters) fixed with box type hinges with steel handle, and steel peg stay,with glazing bars for receiving glass / MS flats for receiving wire mesh making good jambs after fixing new window complete all as specified and as directed. |
| 21 | S&F steel ventilator with top hung shutter (Glazed or wire mesh shutters) fixed with box type hinges with steel handle, and steel peg stay,with glazing bars for receiving glass / MS flats for receiving wire mesh making good jambs after fixing new ventilator complete all as specified and as directed. |
| 22 | S&F steel window or ventilator fixed type with glazing bar making good jambs after fixing new window or ventilator complete all as specified and as directed. |
| 23 | S&F framed work such as bands,straps,clamps and hold fast et forming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 24 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 25 | S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 26 | M&L for 4.8 mm thick Sheet glass, ordinary quality fixing in rubber gascket for aluminium door, window or ventilator in square exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 27 | M&L for prelaminated Particle board 12 mm thick exterior grade prelaminated both side with decorative choice laminations fixed with screws to timber frame work or to aluminium frames as in doors and partitions complete all as specified and directed. |
| 28 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 29 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed. |
| 30 | S&F 4 mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed. |
| 31 | Supply & fix 100mm long medium weight mild steel cold rolled medium weight butt hinges, fixed with stainless steel screws complete all as specified and directed. |
| 32 | Supply & fix 75mm long medium weight mild steel cold rolled medium weight butt hinges, fixed with stainless steel screws complete all as specified and directed. |
| 33 | S & F Continuous (piano) hinges of 30mm flap width, mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 34 | S&F 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 35 | S&F of 150 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed all as specified and directed. |
| 36 | S&F 125 mm size Aluminium handles, cast type, anodised and fixed all as specified and directed. |
| 37 | S&F 150 mm size Aluminium handles, cast type, anodised and fixed all as specified and directed. |
| 38 | S&F of 200 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed all as specified and directed. |
| 39 | S&F of 300 mm long aluminium alloy, anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 40 | S & F 18/19mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both side complete all as specified and directed. |
| 41 | S&F Ist Class hard wood external teak wood lipping, 6 mm thick on exposed surface of 19 mm thick prelaminated particle board fixed with nails complete all as specified and directed. |
| 42 | M&L for 12 mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both side, fixed with screws to timber frame-work including exposed surfaces finished with external teak wood lipping, 6 mm thick fixed with nails fixed in repair complete all as specified and directed. |
| 43 | S&F Ist Class hard wood external teak wood lipping, 6 mm thick on exposed surface of12 mm thick prelaminated particle board fixed with nails complete all as specified and directed. |
| 44 | Dismantling boarding, any description, fixed in any position with nails all as specified and as directed. |
| 45 | M & L for Weather boarding 2nd class hard wood clean sawn,plain 20mm thick boarding, supplied and fixed with nails in any situation (except flooring and skirting) complete all as specified and directed. |
| 46 | M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer. |
| 47 | M&L preparation of new wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 48 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises. |
| 49 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 50 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 51 | M&L glazed ceramic tile 350x 250x 7 mm or 450X 350X 7mm thick coloured fixed as in vertical surface such as risers of steps, skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15 mm thick backing coat in cement mortar (1:6) complete all as specified and directed. |
| 52 | M&L for vitrified cremic tiles 10 mm thick light shade (square/rectangular) polished ,area of each tile nexc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointing in white or coloured cement to match the coloure of tiles over and including 15 mm thick screed bed in CM (1:4) complete all as directed and specified |
| 53 | All as per item No.52 above but on vertical surfaces over and including 10 mm thick rendering in CM (1:3) complete all as specified and directed. |
| 54 | M & L Granite (of any type) work 20MM thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 20mm thick cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr - in - Charge. |
| 55 | S & F in repair vitreous china wash hand basin with pedestal of size 550mm x 450mm, incl fixing to wall with brackets, 32 mm waste coupling half or full threaded,PVC flexible waste pipe 32mm dia brass chromium plated waste fitings, 15mm dia PVC connecting pipe incl 15mm dia pillar tap cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks fly nuts complete all as directed and specified. |
| 56 | S&F inrepair 500mmx350mm cabinet mirror of selected quality glass, fixed to screws and cup washers complete all as specified and directed. |
| 57 | S&F in repair Corner glass shelf fixing with srew,complete all as specified and directed. |
| 58 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 59 | S & F in repair 2 Way Bib tap cast copper alloy fancy type suitable for15 mm dia pipes Make:- Jaquar and equivalent company all as specified and as directed. |
| 60 | S&F in repair health fauset, brass chromium plated with 1 mtr long flexible PVC tube and wall hook all as specified and directed. |
| 61 | S&F in repair 25mm dia curtain rod (curtain rails), alumunium alloy, powder coated with and including decorattive knobs etc complete all as specified and directed. |
| 62 | S& F Brass CP Basin / Sink mixure, swan neck type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Jaquar or equivalent as approved by GE. Please Enable Macros to View BoQ information |
| 63 | S& F Brass CP Basin / Sink mixure, swan neck type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Jaquar or equivalent as approved by GE. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender