Tender For Provision Of Two X Duct Cooler System For Bldg No P-A1 (Third Floor) Of 1811 Pioneer Unit And Provision Of 22 X Ducting Type Industrial Desert Cooler In Bldg No P-201 (Stripping Bay) And Bldg No P-139 At 505 Army Base Workshop Under Ge (U)
Tender Value
48.58 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
17 days left
EMD
97160
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Two X Duct Cooler System For Bldg No P-A1 (Third Floor) Of 1811 Pioneer Unit And Provision Of 22 X Ducting Type Industrial Desert Cooler In Bldg No P-201 (Stripping Bay) And Bldg No P-139 At 505 Army Base Workshop Under Ge (U) P &M Delhi Cantt-10.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, installation, testing and Commissioning of Industrial Ductable Super Cooler Made of 100% Virgin UV stabilized Industrial grade polymer cabinet, Rust and shock free for life, 10 year warranty on outer shell/ body cabinet, 4G Rigid Media cooling Pads for long life and great cooling efficiency of upto 85% , heavy duty three phase single speed fan motor made of 100% Copper wiring made in India which produces 19000 CMH, Turbo Axial Fan for Super Low Sound and super long air flow upto 100 feet, including high quality MCB remote Control Power Panel and it comes with RCT (Remote Clean), QCT (Quadra flow cooling and silver Nano Air Filtration IAQI Technology, and this machine can run on Generator complete including Supply & fixing of lack phase voltage/ short phase motor protection (Three phase control box with and drain remote controls operation range 380 to 440 Volts Motor load capacity upto 3.0 KW make as recommended by original manufacturer of machine and connection with water and electricity complete all as specified and directed. Make:- KAAVA-4G-toofan 19 K or equivalent model of Breezair/ Airkaa/ Symphony/ Marut Air/ EvapolerNote:- (i) Maintenance of Ductable coolers during defect liability period should be done by Original Manufacturers of the machine/ equipment. |
| 2 | Material & Labour for Fabrication, Installation, Balancing and Commissioning of Site fabricated GSS sheet metal rectangular GI duct 24 Gauge SWG for air discharge supports as per IS 655-2010 complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports & mounting ,connecting unit to duct ,controller fixation ,joint gasket , nut bolts ,flanges ,cleats etc. of 24 gauges including cutting of GI Sheet where required complete all as specified and directed. |
| 3 | Material & Labour for XLPE insulation - High quality XLPE Aluminium with foam 9mm insulation for duct in sun exposed complete all as specified and directed |
| 4 | Supply & Fixing of Air grills with auto swing & rust free for life, specially engineered grill for upto 2X longer airflow & wider angle coverage and upto 50% less sound including nuts, bolts, screws ,rubber gasket etc. to make the system complete all as specified and directed |
| 5 | Supply & fixing of Lack Phase Voltage/ Power Fluctuation protection for ductable coolers complete all as specified and as directed. Make:- As per recommendation of manufacturer at Ductable cooler in item No. 1. |
| 6 | Supply & fixing and Commissioning of fire retardant anti-vibration canvas connector for connection of cooler with ducts complete all as specified and directed |
| 7 | Material & Labour for frame work with angle iron for frame support with fabrication, welding joining including cutting tops to shape as directed, drilling holes, notching for wire flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed |
| 8 | Material & Labour for Sub main wiring with four(04) runs of single core 4 Sqmm (nominal area) PVC insulated copper conductor FRLS (Confirming to IS-694) multi stranded, unsheathed 1100 volts grade in PVC conduit (medium grade) of adequate size on surface of wall/ceiling with all fittings & accessories including one (01) run 4 Sqmm single core unsheathed multi stranded, copper cable FRLS (Confirming to IS-694) as earth continuity wire complete all as specified and directed.Note:- (i) Four run of 4 sqmm copper cable and one run of 4 sqmm copper cable (Earth wire) alongwith PVC conduit measured as one unit length.(ii) Suitable colour cole of wire shall be maintained for phase/neurtal/earth. |
| 9 | Material & Labour for Sub main wiring with four(04) runs of single core 2.5 Sqmm (nominal area) PVC insulated copper conductor FRLS (Confirming to IS-694) multi stranded, unsheathed 1100 volts grade in PVC conduit (medium grade) of adequate size on surface of wall/ceiling with all fittings & accessories including one (01) run 2.5 Sqmm single core unsheathed multi stranded, copper cable FRLS (Confirming to IS-694) as earth continuity wire complete all as specified and directed.Note:- (i) Four run of 2.5 sqmm copper cable and one run of 2.5 sqmm copper cable (Earth wire) alongwith PVC conduit measured as one unit length.(ii) Suitable colour cole of wire shall be maintained for phase/neurtal/earth) |
| 10 | Supply & Installation of Rotational moulded polyethylene water storage tanks of cap 1000 litrs , 3 layers (cylindrical vertical with closed top) hoisted and fixed in position with incoming line and valves alongwith all fittings all as specified and directed |
| 11 | Supply & Fixing GI pipe medium grade of 20 mm dia laid to walls and ceilings with saddle clamps or laid in floors including all fittings and fixtures as required complete all as specified and directed |
| 12 | Supply & Fixing GI pipe medium grade of 15 mm dia laid to walls and ceilings with saddle clamps or laid in floors including all fittings and fixtures as required complete all as specified and directed |
| 13 | Supply & Fixing gun-metal, globe or gate or stop valves, 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed |
| 14 | Supply & Fixing gun-metal, globe or gate or stop valves, 15 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed |
| 15 | Supply & Fixing Ball valves high pressure of PTMT with epoxy coated Aluminium Rod & high density plastic ball screwed for iron pipe of size 20 mm dia bore and fixed complete all as specified and directed |
| 16 | Supply & Fixing PVC connection pipe of 15 mm bore of length 450 mm long complete all as specified and directed |
| 17 | Supply & Fixing PVC flexible drain pipe of size 30 mm including all fittings complete all as specified and directed |
| 18 | Drilling of holes into a brick/stone wall for GI duct of duct cooler making good to facings where required and pointing in cement mortar 1:3 to ends or edges with white cementing complete all as specified & directed. |
| 19 | Supply & Fixing TPN 04 way with 200 Amps rated bus, double door 415 V, Sheet metal encloser for distribution box complete all as specified and as directed. |
| 20 | Supply & Fixing SPN 04 way with 200 Amps rated bus, double door 240 V, Sheet metal encloser for distribution box complete all as specified and as directed. |
| 21 | Supply & Fixing MCB TPN 63 Amp, 415V 10KA 'B' Curve complete all as specified and as directed. |
| 22 | Supply & Fixing MCB TPN 40 Amp, 415V 10KA 'B' Curve complete all as specified and as directed. |
| 23 | Supply & Fixing MCB TPN 32 Amp, 415V 10KA 'B' Curve complete all as specified and as directed. |
| 24 | Cutting existing road/ Hard Standing with width not exceeding 750 mm and 1.0 m deep for laying of water mains/cable and filling back with excavated soil except road portion which shall be make good with cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender