Tender For Repair/Maintenance Of Internal Electric Supply Including Fans,Geysters At Zone B And Repair/Replacement Of Street Lights,Security Lights,Solar & Bollard Lights Zone B Under Ge Navy Chennai
Tender Value
29.25 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
8 days left
EMD
58500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance Of Internal Electric Supply Including Fans,Geysters At Zone B And Repair/Replacement Of Street Lights,Security Lights,Solar & Bollard Lights Zone B Under Ge Navy Chennai
BOQ
| Sl. No. | Item Description |
| 1 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., removing materials to store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc. |
| 2 | Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into and including non-metallic rigid PVC conduit of 20 mm dia/ PVC Casing capping along with 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof with and including 1.6 mm thick MS sheet fabricated terminal boxes flush mounted for mounting the switches, sockets, fan regulator etc as required with 3mm thick laminated hylum sheet top cover all as specified and directed for One light point controlled by one switch |
| 3 | All as per item no.2 here in before but for One fan point controlled by one regulator / switch. |
| 4 | All as per item no.2 here in before but for One 3 pin socket outlet 5 amps socket on independent board |
| 5 | All as per item no.2 here in before but for One 3 pin socket outlet 5 amps socket on Same Board board |
| 6 | All as per item no.2 here in before but for One light point controlled by two Nos of two way switches. |
| 7 | All as per item no.2 here in before but for One bell/buzzer point controlled by one push button |
| 8 | All description as per item No. 2 here-in-before but with 4 sqmm cable for one 3 pin socket outlet 15 Amps on independent board with 4 sqmm cable as earthing conductor. |
| 9 | S&F Socket outlet 2 in 1, 3 pin, 5A complete all as specified and as directed. |
| 10 | Supply and fix switch piano flush type single pole one way 5 A 240 Volts complete all as specified and as directed including taking down old unserviceable switches. |
| 11 | Supply and fix switch flush type single pole two way 5 A 240 Volts complete all as specified and as directed. |
| 12 | Supply and fix switch Socket combination 2 in 1, 5 Amps Flush type 240 Volts complete all as specified and as directed. |
| 13 | Supply and fix switch Socket combination 5 Amps / 16 amps, 5 in 1 flush type 240 Volts complete all as specified and as directed. |
| 14 | Supply and fix ceiling rose 3 ways PVC / Polycarbonate, isolated body complete all as specified and as directed. |
| 15 | Supply and fix Call bell, ding-dong, suitable for working on 230 volts AC supply, single pole, complete all as specified and as directed. |
| 16 | Supply and fix Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and as directed. |
| 17 | Supply and fix Bell push flush type 5 A 240 Volts complete all as specified and as directed. |
| 18 | S/ F Modular switch 1 way 5A, 1 Module 240 Volts including taking down old unserviceable switch complete all as specified and as directed. |
| 19 | S / F Modular switch 1 way 16A, 1 Module including taking down old unserviceable switch complete all as specified and as directed. |
| 20 | S/ F Modular bell push ,5 A, 1 Module including taking down old unserviceable bell push complete all as specified and as directed. |
| 21 | S / F Modular Socket 5A-2/3 pin combined 2 Module including taking down old unserviceable socket complete all as specified and as directed. |
| 22 | S / F Modular Socket 5A / 15A - 2 / 3 pin combined 2 Module. including taking down old unserviceable socket complete all as specified and directed. |
| 23 | S/F Modular fan Regulator Step type , 2 Module including taking down old unserviceable fan regulator complete all as specified and as directed. |
| 24 | Supply and fix Modular switch 5 Amps two way flush type including taking down old unserviceable modular switch complete all as specified and directed. |
| 25 | Supply & fix Modular White cover plate with frame, 1 Module including taking down old unserviceable modular cover plate complete all as specified and directed. |
| 26 | Supply & fix Modular White cover plate with frame, 2 Module including taking down old unserviceable modular cover plate complete all as specified and directed. |
| 27 | Supply & fix Modular White cover plate with frame, 3 Module including taking down old unserviceable modular cover plate complete all as specified and directed. |
| 28 | Supply & fix Modular White cover plate with frame, 4 Module including taking down old unserviceable modular cover plate complete all as specified and directed. |
| 29 | Supply & fix Modular White cover plate with frame, 6 Module including taking down old unserviceable modular cover plate complete all as specified and directed. |
| 30 | Supply and fix Modular metal flush box 1/2 module including taking down old unserviceable metal box and making good the disturbed surface of wall complete all as specified and directed. |
| 31 | Supply and fix Modular metal flush box 3 module including taking down old unserviceable metal box and making good the disturbed surface of wall complete all as specified and directed. |
| 32 | Supply & fix Modular Metal flush Box 4 Module including taking down old unserviceable metal box and making good the disturbed surface of wall complete all as specified and directed. |
| 33 | Supply & fix Modular Metal flush Box 6 Module including taking down old unserviceable metal box and making good the disturbed surface of wall complete all as specified and directed. |
| 34 | Taking down carefully old unserviceable submain wiring with aluminum /copper conductor cable 4/6/10/16 Sqmm in PVC conduit complete removing the materials and taken as credit and making good the disturbed surface of wall / floor etc. |
| 35 | M & L for Sub main wiring with two runs of single core 4 sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade and one run of 4 sq mm multi stranded copper conductor cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit 25 mm dia/PVC casing capping 25 mm including accessories all as specified and directed. Note: Three runs of 4 Sqmm cable and one run of 25mmconduit / casing capping will be measured as one unit length. |
| 36 | M & L for Sub main wiring with two run single core 6 sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade and one run of 6 sq mm multi stranded copper conductor cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit 32 mm dia/PVC casing capping 25 mm including conduit accessories all as specified and directed. Note: Three runs of 6 Sqmm cable and one run of 32mmconduit / casing capping will be measured as one unit length. |
| 37 | M & L for Sub main wiring with four runs single core 4sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade and two runs of 4 sqmm multi stranded copper conductor cable as earth continuity conductor drawn into and including non-metalic rigid PVC conduit, 25mm dia/PVC casing caping 32 mm and conduit accessories concealed/surface of wall/roof/ceiling etc complete all as specified and directed.Note: Four runs of 4sqmm and two runs of 4 sqmm cable and one run of 25mm dia conduit/32mm casing capping shall be measured as one unit length. |
| 38 | M & L for Sub main wiring with four runs single core 6 sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade and one run of 6 sqmm multi stranded copper conductor cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit 32 mm dia/PVC casing capping 32 mm including conduit accessories all as specified and directed. Note: five runs of 6 Sqmm cable and one run of 32 mm conduit / casing capping will be measured as one unit length. |
| 39 | Supply and fix Sheet metal enclousers with socket plug top and MCB SPN 20A, 240 volts, with a two pin and earth plug socket complete with one single MCB 20 Amps, 240 volts (for AC ) including taking down old unserviceable old unserviceable Sheet metal enclousers with socket plug top complete all as specified and directed. |
| 40 | Supply and fix sheet metal enclosure powder coated double door for Distribution Board, SPN 4 way DB ,240 V with detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections, dismantling from position unserviceable DBs for taking into credit complete all as specified and as directed. |
| 41 | Supply and fix sheet metal enclosure powder coated double door for Distribution Board, SPN 8 way DB with 200 A bus bar ,240 V with detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections, dismantling from position unserviceable DBs for taking into credit complete all as specified and as directed. |
| 42 | Supply and fix sheet metal enclosure powder coated double door for Distribution Board, SPN 12 way DB with 200 A bus bar ,240 V with detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections, dismantling from position unserviceable DBs for taking into credit complete all as specified and as directed. |
| 43 | Supply and fix sheet metal enclosure powder coated double door for Distribution Board, TPN 4 way DB ,415 V with Detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections, dismantling from position unserviceable DBs complete for taking into credit all as specified and as directed. |
| 44 | Supply and fix sheet metal enclosure powder coated double door for Distribution Board, VTPN 4 way DB with IP 43 - IK 09 including disconnecting electric connections, dismantling from position unserviceable DBs for taking into credit complete all as specified and as directed. |
| 45 | Supply and fix MCB SP 5 A to 32 A , B curve, 10 kA including , Disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed. |
| 46 | Supply and fix MCB SP 40 Amps , B curve 10 kA including , Disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed. |
| 47 | Supply and fix MCB SPN 32 Amps , C curve 10 kA including , Disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed. |
| 48 | Supply and fix MCB SPN 40 A- 63Amps , C curve 10 kA including , Disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed. |
| 49 | Supply and fix MCB TP 25A - 63 A , C curve 10 kA including , Disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed. |
| 50 | Supply and fix MCB TPN 16 A- 32 Amps , C curve 10 kA including , Disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed. |
| 51 | Supply and fix MCB TPN 40A- 100 A , C curve 10 kA including , Disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed. |
| 52 | Supply and lay earth continuity conductor or main earting lead fixed to wall on batten or recess or burried in ground or drawn in conduit / conduit pipe or fixed to poles or any other indicted situation for loop earthing etc of galvanised steel earth strip of size 32 X 6mm including taking down old unserviceable earth strip complete for taking into credit complete all as specified and as directed by the Engineer-in-Charge |
| 53 | Supply and lay earth continuity conductor or main earting lead fixed to wall on batten or recess or burried in ground or drawn in conduit / conduit pipe or fixed to poles or any other indicted situation for loop earthing etc of galvanised steel earth wire 4mm dia including taking down old unserviceable GI earth wire complete all as specified and as directed. |
| 54 | Supply and fix Lightning Protection Single point air termination aluminum rod 12mm dia 300mm long with base plate including taking down old unserviceable aluminium rod for taking into credit complete all as specified and as directed by the Engineer-in-Charge . |
| 55 | Supply and fix Test point terminal box made out of Gun metal or Phosphorous bronze of size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hex head screws including taking down old unserviceable test point terminal box for taking into credit complete all as specified and as directed by the Engineer-in-Charge . |
| 56 | Supply and fix Aluminium strip of 25x 3.15mm fixed with screws/ clamps / insulators for roof conductors and down conductors above ground level complete including taking down old unserviceable Aluminium strip for taking into credit complete all as specified and as directed by the Engineer-in-Charge. |
| 57 | Supply and fix MCCB 3 Pole, 415 V, fixed type, 25 to 100 Amps with breaking capacity 16 KA complete all as specified and as directed including taking down old unserviceable MCCB for taking into credit complete all as specified and as directed by the Engineer-in-Charge . .(Make : L&T/ABB/Legrand) |
| 58 | Supply and fix MCCB 3 Pole, 415 V, fixed type, 125 Amps with breaking capacity 16 KA complete all as specified and as directed including taking down old unserviceable MCCB for taking into credit complete all as specified and as directed by the Engineer-in-Charge . .(Make : L&T/ABB/Legrand) |
| 59 | Demolition, Cement concrete (unreinforced) in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and as directed by the Engineer-in-Charge. |
| 60 | M & L for 100 mm thick cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate for making good the disturbed road surface after laying of pipe line over returned filled and compacted earth surface to match with existing road level complete all as specified and as directed. |
| 61 | Supply and fix of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including taking down old unserviceable fan complete all as specified and as directed by the Engineer-in-Charge . |
| 62 | Supply and fix in repairs new exhaust fan with louvers , steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers |
| 63 | Supply and fix in repairs new exhaust fan with louvers, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers |
| 64 | Supply and fix in repairs new exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm |
| 65 | Labour Charges for Fixing only exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan complete |
| 66 | Supply and fix condensor 2.5 to 4 mfd for Ceiling / exhaust fan, including taking down old unserviceable material complete all as specified and directed. |
| 67 | M & L for spray Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and directed. |
| 68 | Supply and fix louvers for exhaust fan of any size including taking down old unserviceable louvers complete all as specified and directed. |
| 69 | Supply and fix Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth including taking down old unserviceable material complete all as specified and directed. |
| 70 | Supply and fix Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V including taking down old unserviceable material for taking credit complete all as specified and directed. |
| 71 | Supply and fix Flame proof exhaust fan 18\\" single phase 0.33 HP motor 1440 rpm 4000 cfm and louvers 18\\" including taking down old unserviceable material for taking credit complete all as specified and directed. |
| 72 | Supply and fix electric water heater , storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.including taking down old unserviceable material for taking credit complete all as specified and directed. |
| 73 | Supply and fix LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. and taking down old U/S fittings for taking into credit complete all as specified and directed |
| 74 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed including taking down old U/S fittings for taking into credit. |
| 75 | Supply and fix LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old U/S fittings for taking into credit. |
| 76 | Supply and fix LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete including taking down old U/S fittings for taking into credit . |
| 77 | Supply and fix round /square 300 mm x 300 mm shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old U/S fittings for taking into credit . |
| 78 | Supply and fix vertical mounting integral highbay/ mediumbay in hanger ceiling at 10 meter height LED IP65 luminaire, Luminous Flux 15,000 lm ,Luminous Efficacy (rated) (Nom) 150 lm/W, IP65, IK08 .Surge Protection- Luminaire surge protection level until 4 kV along with necessary chain , hooks to hold the eyebolt & hang the light fitting in hanger complete.Make: Philips |
| 79 | Supply and fix LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. including all accessories and dismantling of old unserviceable fitting for taking into credit complete all as specified and as directed. |
| 80 | Supply and fix LED light fitting 2x 16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size including all accessories and dismantling of old unserviceable fitting for taking into credit complete all as specified and as directed. |
| 81 | Providing comprehensive periodical/preventive maintenance of street light , flood light , highbay light , solar light and other security lights including attending all complaints of street light , flood light , highbay light , solar light & other security lights making the lights serviceable including regular cleaning of solar panels of solar light fittings. (Each Job contains 3 Complaints) |
| 82 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core incl taking down the unsv cable complete |
| 83 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core incl taking down the unsv cable complete |
| 84 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core incl taking down the unsv cable complete |
| 85 | Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for laying cable and getting out in any type of soil, complete all as specified |
| 86 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil, complete all as specified |
| 87 | Removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge. |
| 88 | Supply and lay double walled corrugated HDPE pipe inner plain 750 N with RR & NPF nominal dia 40mm , complete all as specified |
| 89 | Supply and lay double walled corrugated HDPE pipe inner plain 750 N with RR & NPF nominal dia 50mm , complete all as specified |
| 90 | S & F in replacement energy saving LED street light fittings,35 Watts or nearest higher wattage, with in-built electronic driver, IP 65 class of protection with versatile pressure die-cast aluminium housing parts, pure polyester powder coated dark gray housing, toughened glass cover with silicon gaskets and energy efficient LED including all accessories and dismantling of old unserviceable fitting for taking into credit complete all as specified and as directed. |
| 91 | Supply and fixing LED street light fitting 70 watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. and dismantling of old unserviceable fitting for taking into credit complete all as specified and as directed. |
| 92 | Supply and fixing LED flood light 170 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. and dismantling of old unserviceable fitting for taking into credit complete all as specified and as directed. |
| 93 | Supply and fix of SmartBright Highbay LED Luminaire, 200 W, 30000 lm, 6500 K , Luminous Efficacy (rated) (Nom) 150 lm/W , Housing Material Aluminum die cast, Optical cover material Polycarbonate, Ingress protection code IP65,Mech. impact protection code IK06, in the hangar at height 10 meter from ground and dismantling of old unserviceable fitting for taking into credit complete all as specified and as directed. |
| 94 | Supply and fix PVC insulated two single core 1.5 sqmm FRLS copper conductor and one run of 1.5 sqmm multistranded copper conductor as earth continuity conductor drawn through and including 20mm dia heavy duty non metallic rigid PVC conduit and accessories incl taking down of old unserviceable cable complete all as specified and as directed.Note : (i)Two run 1.5 Sqmm of single core, one run of 1.5 sqmm earth conductor and PVC conduit will be measured as one RM. |
| 95 | Supply and fix PVC insulated two single core 2.5 sqmm FRLS copper conductor and one run of 2.5 sqmm multistranded copper conductor as earth continuity conductor drawn through and including 20 mm dia heavy duty non metallic rigid PVC conduit and accessories incl taking down of old unserviceable cable complete all as specified and as directed.Note : (i)Two run 2.5 Sqmm of single core, one run of 2.5 sqmm earth conductor and PVC conduit will be measured as one RM |
| 96 | Supply and fix LED Aviation/ Obstruction light 10 W or higher wattage , IP 65 , Protection against short-circuit,Protection against surge, operating input voltage range 190 – 270VAC, installed on the roof of overhead reservoir or on roof top of high rise building/ hanger including taking down old unserviceable complete all as specified and directed. |
| 97 | Material and labour for preparation of old plastered surface including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and complete removal of existing treatment and applying two coats of cement based paint all specified and as directed. |
| 98 | Material and labour for writing letters or figures (Block.Roman, Italic or Indian) n exc. 30 cm high in blue/ black coloured circle complete all specified and as directed. |
| 99 | S & F pole mounting type FRP cable looping box with connector of inside dimension 280mm x 235mm x 135mm with 40 x 6mm flat iron including suitable brass gland, lugs etc, rack for fixing MCB and terminal box cable looping in -out. The entire unit has to be fixed on pole with suitable fixing arrangement complete all as specified and as directed. |
| 100 | M & L of GI bracket made out of 25 - 40 mm dia GI medium grade pipe of length 1.50m, bent to an angle of 30 degree and fixed with 40mm x 6mm flat iron, including suitable 02 set of clamps with nut , bolts ,and washers for fixing of light to pole complete all as specified and as directed. |
| 101 | M & L for replacement of Prestressed concrete pole, 9.0 metres long, 102mm x 172mm at top and 102mm x 279mm at bottom, class 10 complete including disconnecting existing cable in the old pole, keeping it safely for taking into credit and reconnecting the cable after installing the new pole along with new lugs all as specified and as directed by the Engineer-in-Charge. |
| 102 | M & L for replacement of Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-22 (8.5 metres long) including disconnecting existing cable in the old pole, keeping it safely for taking into credit and reconnecting the cable after installing the new pole along with new lugs all as specified and as directed by the Engineer-in-Charge. |
| 103 | Material and labour for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation of poles including form work and fair finishing to exposed surfaces complete all as specified and as directed by the Engineer-in-Charge. |
| 104 | Material and labour for PCC 1:2:4 type B2 using 40 mm graded stone aggregate as in coping for poles including form work and fair finishing to exposed surfaces complete all as specified and as directed by the Engineer-in-Charge. |
| 105 | S&F LED post top lantern 20 watts or nearest higher wattage , with IP 65 protection with accessories and connecting up light fitting with copper conductor cable of suitable size from junction box to connector block and dismantling of old unserviceable conventional fitting for taking into credit complete all as specified and directed. |
| 106 | S & F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 15 AMP, fixed in the steet light looping box complete with connection testing and commissioning including all accessories and dismantling of old unserviceable MCB for taking into credit complete all as specified and as directed. |
| 107 | M & L for 40mm bore `light grade` galvanised tubes with all fitting, laid in trenches including all accessories and dismantling of old unserviceable pipe for taking into credit complete all as specified and as directed by the Engineer-in-Charge |
| 108 | Supply and fix LED Bollard lights 7 W Luminous Flux 200 lm with following technical parameters: Light source color -Warm white,Overall height 800 mm,Ingress protection code IP65,Mech. impact protection code IK10, Surge Protection (Common/Differential) 4/4 kV, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender