Tender For Augmentation Of Existing Water Supply Of Smvdu, Kakryal
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Aug 2026
1 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Augmentation Of Existing Water Supply Of Smvdu, Kakryal
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation over areas (exceeding 30 cm and upto 1.5 m in depth, 1.5 m ineanvation by manual m in foundation trenches and disposal of surplus excavated soil as directed width as well as 10 sqm on plan) including disposal of excavated earth upto 1 mtr for cutting ead uand neatly dressed in 80% all kinds of soil , 20% Ordinary Rock |
| 2 | Earth work in excavation over areas (exceeding 30 cm and upto 1.5 m in depth, 1.5 m in eanvation by manual m in foundation trenches and disposal of surplus excavated soil as directed width as well as 10 sqm on plan) including disposal of excavated earth upto 1 mtr for cutting ead uand neatly dressed in all kinds of soil |
| 3 | Earth work in excavation over areas in foundation drain pipes (exceeding 30 cm and upto 1.5 m in depth, 1.5 m ineanvation by manual m in foundation trenches and disposal of surplus excavated soil as directed width as well as 10 sqm on plan) including disposal of excavated earth upto 1 mtr for cutting ead uand neatly dressed in all kinds of soil |
| 4 | P/Laying of C. Concrete 1:4:8 with 40 mm nominal size aggregate (crusher) |
| 5 | Providing &laying in position cement concrete of specified grade excluding the cost of centering and shuttering -all work upto plinth level in 1:3:6(1cement:3coarse sand:6graded stone 40mmthick size) |
| 6 | Handpacking / filling of stones into Knitted crates |
| 7 | Supply of stones |
| 8 | cost of knitted wire crate |
| 9 | D/Filling of Stone Including Supply |
| 10 | Providing & Laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work up to plinth level M-30 grade |
| 11 | Reinforced cement concrete work in walls (any thickness) incl. attached pilasters, buttresses, plinth and string course, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excl. cost of centering, shuttering, finishing and reinforcement-All work up to plinth level M-30 grade. |
| 12 | Reinforced cement concrete work in arches, arch ribs, domes, vaults, shells, folded plates and roofs having a slope of 15˚ up to floor five level up to floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1 : 1½ : 3 mix (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size crushed). |
| 13 | D.P.C 50mm thick with cement concrete 1:2:4 (1cement:2sand:4 graded stone with 20mm nominal size nallah) |
| 14 | 2nd Class Brick work in 1:6 mortar in Super Structure |
| 15 | Extra for Brick work in Super structure above linth level upto floor-V |
| 16 | Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15, leading balconies, shelves, chajjas, lintel, bands, plain window sills, staircases and spiral stair case up to floor five level excluding the cost of centring shuttering, finishing and reinforced with 1:1½:3 nominal size aggregate. |
| 17 | Providing Tor Steel reinforcement for RCC work including bending binding & placing in position complete |
| 18 | Centering and shuttering incl. strutting, propping etc. and removal of same:-Foundations, footings, bases of columns etc. |
| 19 | Extra for shuttering in circular work in Foundations, footings, bases of columns etc. |
| 20 | Centering and shuttering incl. strutting, propping etc. and removal of same Suspended floor,roofs,landing ,balconies and access platform |
| 21 | Centering and shuttering incl. strutting, propping etc. and removal of same in Retaining walls, return walls, walls (any thickness) incl. attached pilasters, buttresses, plinth and string course fillets etc. |
| 22 | Extra for shuttering in circular work Centering and shuttering incl. strutting, propping etc. and removal of same in Retaining walls, return walls, walls (any thickness) incl. attached pilasters, buttresses, plinth and string course fillets etc. |
| 23 | Centering and shuttering incl. strutting, propping etc. and removal of same in Lintels, beams, plinth beams girders, bressmers and cantilevers. |
| 24 | Extra for shuttering in circular work Centering and shuttering incl. strutting, propping etc. and removal of same in Lintels, beams, plinth beams girders, bressmers and cantilevers. |
| 25 | Centering and shuttering incl. strutting, propping etc. and removal of same in Arches, domes, valuts up to 6.00 mtr span |
| 26 | Extra for shuttering in circular work Centering and shuttering incl. strutting, propping etc. and removal of same in Arches, domes, valuts above 6.00 mtr span |
| 27 | Centering and shuttering incl. strutting, propping etc. and removal of same Edges of slabs and breaks into floor & walls under 20 cm wide |
| 28 | Extra for providing and mixing water proofing material in cement concrete work @ 1.00 kg/50 Kg of cement bag. |
| 29 | Supply of G.P sheet 1.25 mm thick at construction joints during concrete work. |
| 30 | Supply of G. I. Bends 100 mm dia with MS plate incl. cutting, welding and fixing in position complete. |
| 31 | Supply and fixing of 110 mm dia UPVC bends 45 for air purpose in dome |
| 32 | Providing, Laying & fitting G.I Pipes incl. cost of pipes and earth work for wash out & delivery pipes |
| 33 | Filling available earth (excluding rock) in trunches,plinth,sides of foundation etc.in layer,not excluding 10cm in depth consolidated each layer by raming and watering lead upto 50 mtr and lift upto 5 mtr |
| 34 | 12 mm Cement Plaster finished with a floating coat of neat cement of mix 1 : 3 mix ( 1 cement : 3 coarse sand) |
| 35 | 12 mm Cement Plaster in Cement mortar 1 : 4 mix ( 1 cement : 4 coarse sand) |
| 36 | Extra for plastering in circular work not exceeding 6.00 mtr. in radius one coat. |
| 37 | 12mm thick cement plaster in 1:6(1 Cement:6 coarse sand) (INTERIOR & EXTERIOR)) |
| 38 | 6 mm Cement plaster to ceilling of mix 1:3 (1 cement : 3 fine sand) |
| 39 | Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement. |
| 40 | C.Concrete Flooring in 1:2:4(1cement:2 coarse sand:4 graded stone aggregate) 50mm thick with 20mm nominal site stone aggregate. |
| 41 | P/F 1 mm thick M.S Steel door with Frame of 40x40x6 mm angle iron and 3 mm M.S gusset plates at the junction and corners, all necessary fitting complete, including applying a priming coat of approvel steel primer. Using flats 30x6 mm for diagonal braces and centre cross piece. |
| 42 | Structure steel work welded in built up section,trusses and framed work,including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer all complete. |
| 43 | Providing and fixing 35 mm thick wire gauze shutter using galvanized M.S wire gauge of ang. width for apurtus 1.4mm with wire of door 8.63mm fix door,window and clear story windows including ISImarked bright finished or black enameled M.S butt hinges with necessary screws. |
| 44 | Painting with synthetic enameled paints of approved brand and manufacture to give an even shade two or more coats on new work over an under coats of suitable shade with ordinary paints of approved brand and manufacture.New work (two or more coats) applied @ 3.84 kg/10 sqm. |
| 45 | Finishing exterior & Interior with Water proofing cement paint of approved brand and manufature to give an even shade new work(Two or more coats [email protected]/10sqmt) |
| 46 | Finishing Ceilling with Lime to give an even shade.New work(Three or more coats) |
| 47 | Providing and fixixng M.S Grill of required patteren in frame of window etc. with M.S Flate,square of round bar etc. all complete fixed to steel window with welding. |
| 48 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1cement:3sand:6graded stone aggr. 20mm nominal size) well rammed and consolidated and grouted with fine sand incl. finishing the top smooth. |
| 49 | Providing and fixing glass strips In joints-fixing flooring 40mm wide and 4mm thick |
| 50 | Provision for electric fitting |
| 51 | Provision for bathroom fitting |
| 52 | Carriage of sand for an average distance of 75 Km by MT & 500m HL from nearest source to the site of work incl. loading, unloading and stacking complete. |
| 53 | Carriage of stone aggregate for an average distance of 55 Km MT and 500m HL from nearest source to the site of work incl. loading, unloading and stacking complete. |
| 54 | Carriage of cement for an average distance of 55 Km by MT & 500m HL from nearest source to the site of work incl. loading, unloading and stacking complete. |
| 55 | Carriage of steel for an average distance of 55 Km by MT & 500m HL from nearest source to the site of work incl. loading, unloading and stacking complete |
| 56 | Carriage of brick for an average distance of 35 Km by MT & 500m HL from nearest source to the site of work incl. loading, unloading and stacking complete. |
| 57 | Carrige of Boulders by HL 1200m |
| 58 | Dismantling of GI Pipes (External work) including excavation and refilling trenches after taking out pipes manually / by mechanical means incl. stacking of pipeswithin 50 mtrs leads as per directions of Engineer-in-charge above 40mm dia |
| 59 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc not exceeding 1.5 mtr in width and for shafts, wells, cesspits and the like in all kinds of soil 100% |
| 60 | Laying & fitting of GI pipes 100mm dia |
| 61 | Providing and laying of GI pipes 100mm dia GI Pipe |
| 62 | Labour engagement Cutting, bending, rethreading of damaged ends of G.I pipes at site of work incl. allied works including Watch & ward of departmental materials during execution of works unskilled |
| 63 | Labour engagement Cutting, bending, rethreading of damaged ends of G.I pipes at site of work incl. allied works including Watch & ward of departmental materials during execution of works semi skilled |
| 64 | Welding including transportation of plant at site etc.complete in double layer |
| 65 | Mechanical WOrks Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc not exceeding 1.5 mtr in width and for shafts, wells, cesspits and the like not exceeding 10sqm on plan depth upto1.5mtrs including disposal of excavated earth upto 1 mtrs from cutting edge, disposed earth is to be levelled and neatly dressed in all kinds of soil 80% and 20% soft rock. |
| 66 | Providing and laying of MS pipes including cost of welding, fabrications of bends etc. 100mm dia MS Pipe |
| 67 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. layers not exceeding 20cm in depth and lead upto 50 mtrs and lift upot 1.5 mtr |
| 68 | Carriage of MS Pipes from store to site of work by avg distance of 40 km by M/T and avg. 2500m by H/L |
| 69 | Shifting of machinery and allied material after making the approach road as per requirement at site, erection / placement of Rig Machine after leveling & erection of mast at the site of work. |
| 70 | Deep drilling of 200 mm dia bore well upto 130 mtrs. below ground level or till sufficient aquafier Zone/discharge is encountered by using ODEX Method of drilling including simultaneously driving of 200 mm dia ERW casing pipe and providing fixing of casing drive shoe excluding cost of ERW M.S. Casing Pipe 200mm dia |
| 71 | Cost of ERW M.S. Casing Pipe 200mm dia. 130 mtr (to be charged as per actual) |
| 72 | Development of Tube well by Air Compressor of adequate capacity for 60 hrs or till the clear potable water free from sand and other impurities is obtained |
| 73 | Stabilization/Testing of mini tube well by way over pumping using vertical turbine / submersible pump set till the clear potable drinking water is achieved during the yield test. |
| 74 | Re-development of tube well by air compressor. The job includes shifting of air compressor to the site of work along with accessories. Providing for labour for clearance of site in and around complex, cutting leveling and dressing of ground for erecting of tent and stacking of material after unloading. Development by air compressor and lowering of air line along with column pipes and redevelopment of tube well by cleaning of all the strainers starting from top strainer to lowest strainer and then cleaning the bail plug till the availability of sand free yield. The job includes cost of material such as jointing material nuts and bolts, POL and any other tool & tackles required during the completion of job in all respects.Stabilization and yield testing of tube well by using VT pump/ submersible of adequate capacity as per the specification till yield of tube well and draw down of tube well is ascertained till the clearance of the sand free water and its discharge at its appropriate head. Complete job in all respects, i.e clearance of site, leveling and dressing of ground, providing of POL, tool and tackles, flanges, jointing material, loading/unloading of material, tool and tackles and other allied material with VT pump set and stacking properly at tube well site. The job includes cost of material and labour charges |
| 75 | Providing Of HC Pump Motor Set(2NO):-Providing of HC Pump of 10000 GPH X 300MTR head coupled with suitable motor of 384 V,1400 rpm, 50 HZ, 4 Poles, TEFC Cooled. The pumping machinery should confirm relevant ISO standard with all latest amendment. Complete Job |
| 76 | INSTALLATION of Pump sets:-Foundation Blocks (2 NO):-Modification of existing manifold by way of dismantling of existing pupmset and fabrication of new base frame on the old by way of welding and making the joints vibration proof and construction of new as per pump sizeCarriage:-Carriage of pumping machinery (pump, motor, coupling set, base frame to site of work by Mech. Transportation and Head Load up to Pump Room. The job also includes dismantling the pumping unit, unfastening the coupling bolts, nuts, bolts of the base frame for separating each component viz. motor pump, coupling set, base frame etc., for their proper handling and carriage.Installation (1 nos ):-Installation of new 10000 GPH X 300M. Head H.C. pump set on the foundation blocks at pump room by way of providing and fitting of bolts with nuts and washers for fitting of new pump and motor on each base frame, Also leveling of pump and motor in proper alignment with each other. Tightening the nut bolts of the base frame. Providing and fitting graphite gland packing with fitting of pump glands. Coupling the pump and motor by way of fixing of coupling bolts. Job includes cost of graphite gland packing, nut bolts of the base frame and labour charges for skilled and semiskilled workers deployed for execution of job.Suction Line( 2 Nos) :- Fabrication of suction line of dia equivalent to pump inlet dia, for each pump set out of G.I. pipes, cast iron sluice valve- 1 No. for each line , M.S. bends - quantity as per site requirement. MS flanges – qty as per site requirement for connecting pump suction inlet to suction manifold/sump tank. The job includes cutting the pipe in required lengths as per alignment/layout condition of the suction line at site, the cut edges have to be grinded to give them smooth and even surface for proper welding. Welding the flanges to bends and to the pipe pieces at proper ends, and then joining of the suction line to the suction manifold by way of proper welding works in precise manner. Also fitting of sluice valve at appropriate place in the suction line and joining of the other end of the suction line to the pump suction inlet by providing fitting of hexagonal fasteners and rubber insertion sheet. Job also involves creation of a hole of appropriate size in the wall and then properly dressing the hole by cement concrete mix for passing through of the suction line.Delivery Line(2 nos):- Fabrication of delivery line of dia equivalent to pump outlet dia for each pump set , out of G.I. pipe cast steel reflex valve 1 no., cast steel sluice valve 1 No. M.S. bends– qty. as per site requirement M.S. flanges qty. as per site requirement for connecting pump delivery outlet to the delivery manifold. The job involves cutting the pipe in required lengths as per alignment/layout conditions of delivery line at site, the cut edges have to be grinded with grinder to give them smooth and even surface for proper welding. welding the flanges to bends and to the pipe pieces at proper ends in a precise manner, fitting of sluice valve and reflex valve at appropriate place in the delivery line and jointing of one end of the delivery line to pump delivery outlet by providing and fitting of hexagonal fasteners and rubber insertion sheet then jointing the other end of the delivery line to the delivery manifold by creating a hole of required size in the manifold by gas cutting and then jointing to the delivery manifold by way of proper welding work in a precise manner making v-groove all along the circumference of the cut and butt welding. Job also includes creation of a hole in the wall and then dressing to appropriate size by cement concrete mix for passing through it the delivery line of the pump.The whole job includes cost of material i-e., G.I Pipes, Reflex Valve, Sluice Valve welding rods, M.S. flanges, M.S. bends, nut bolts, rubber insertion sheet, oxygen acetylene gas used and POL used by DG set, hire charges/carriage charges of welding set, DG set, gas cutting apparatus and labour charges for skilled and semi-skilled workers deployed for execution of job. LT control Panel(2 NO):-Designing, Fabrication, Installation, Testing and Commissioning of LT Control Panel of 415 volts, AC 3 phase, 50 HZ for 120/100 HP capacity motor Installed at pump room. The panel shall be dust and vermin proof fabricated out of 14/16 SWG CR sheet. The panel should be sturdy enough for vibration free operation and should be equipped with suitable Locking/ Sealing arrangement. The structure should be provided suitable entry and exist holes for incoming and outgoing cables. The panel should be given two coats of anti-Rust primer and two coats of enamel paint. It should be equipped with MCCB 300 Amp 35KA in input side for short circuit protection, Contractor MNX 225 A-2no (Schneider Make or equivalent) for main and delta supply and 1No contractor MNX-185A (Schneider Make or equivalent) for star operation, I No timer for change over the supply of motor from star to Delta, 2 No push buttons for stop and start operation of motor. 1No thermal relay fitted with main contractor.Metering: The enclosure should be voltmeter, ampere meter are to be provided along with the required current transformer and selector switches. All control wiring should be neat and clean with flexible copper cable to complete the star- delta circuit of outgoing supply.Features and specificationsa)Automation:- the system shall trip off the motor on power failure and on appearance of an electrical fault mentioned below which may otherwise damage the motor field coils and restart the motor automatically on resumption of electric fault thus providing automation to the system and protection to the motor. The system shall provide against:-1. Low voltage below 350V.2. High voltage above 450V.3. Single phase.4. Reverse phasing.5. Un Balanced phasing. 6. Dry running.7. Over loading.Testing and Commissioning of control panel by making connecting to incoming terminals and outgoing terminal of control panel. The job includes providing/ Laying/ fitting of suitable PVC copper conductor properly thimbles at the ends. Testing the performance of the panel on no load and on full load. The job includes the cost of all types of material and labour charges. Voltage Stabilizer(1Nos):-Supplying/Providing/fitting of 200KVA oil cooled manual operated step up/Down voltage stabilizer with following Specifications:-Input Voltage Range 290 ( Phase to Phase) out 400-410 Volts + 5% (Phase to Phase)The stabilizer should be fitted with MCCB 600Amp at output side of Stabilizer. The Stabilizer shall filled with fresh T-oil. Complete job includes mechanical transport/Manual labour for delivery of Stabilizer at Site. Complete job.Painting:-Cleaning all the surfaces of suction and delivery lines by scrubbing with emery paper, sand paper, wire brushes and then applying a single coat of red oxide primer, drying out at moderate temperature then applying two coats of black synthetic enamel paint for smooth and even shades. Job includes cost of material and labour charges.Panel Board, Main switch(1NO)- Fabrication of panel board out of MS angle iron 40mm x 40 mm x 6 mm having a rectangular frame and 2 no horizontal legs and 2 no vertical legs for mounting on the wall and on ground in the pump room, fitting of 12 mm thick one sided mica ply in the Angle iron rectangular frame , cutting/drilling of holes for fitting of different equipment over it. Providing and fitting of 1 No. Main switch of MCCB type 300 Amp capacity. Job includes proper installation of panel board at appropriate place first by way of creating two No. holes in the wall and two No. pits in the ground and then fixing with cement concrete mix. Connecting the panel board to the incoming outgoing cables with providing & fitting of thimbles to the cable leads. Job includes cost of material, labour charges for skilled and semiskilled workers to be deployed for execution of complete job.Painting:-Cleaning all the surfaces of suction and delivery lines by scrubbing with emery paper, sand paper, wire brushes and then applying a single coat of red oxide primer, drying out at moderate temperature then applying two coats of black synthetic enamel paint for smooth and even shades. Job includes cost of material and labour charges.Chemical Earthing:-Providing and fixing of Chemical Earthing by way of digging of pit approximately 2Mtr. Providing and fitting of copper electrode with chemical material and Providing and laying of copper wire with proper nut-bolts. Complete job includes cost of material, labour charges, and tools-tackles for working at site. Complete job includes the cost of material and labour charges for skilled and semi-skilled workers deployed for execution of work.Testing Commissioning:-Testing commissioning of the newly installed pumping units pump room along with allied starting and controlling devices for their smooth functioning. Rectifying the faults noticed during testing and also setting, adjusting the instruments of the panel Board , LT Control Panel and tightening of each cable thimbles of electrical points of stabilizer, main switch, starters and motors and realignment/leveling of pump & motor and checking the leakage of water from suction and delivery line if any. Job includes labour charges for skilled and semiskilled workers deployed to complete the job.Cables :-providing and fitting of following size of PVC insulated copper cable with thimbles :-1. Providing and fitting of 3.5 core armored aluminum cable from Transformer to Main Switch 2. Providing and fitting of copper cables 70 sq mm from Main Switch to voltage stabilizer- 3. Providing and fitting of copper cables 50 sq mm from Voltage Stabilizer to the LT Control Panel/Star delta manual Starter 4. Providing and fitting of copper cables 50 sq mm from LT Control Panel/Starter to motor All the cables shall be of requisite current carrying capacity as per the equipment and shall be routed through the flexible conduit and firmly connected to the electric points of stabilizer, main switch starter and motors.Chemical Earthing:- Providing and fixing of Chemical Earthing by way of digging of pit approximately 2Mtr. Providing and fitting of copper electrode with chemical material and Providing and laying of copper wire with proper nut-bolts. Complete job includes cost of material, labour charges, and tools-tackles for working at site. Complete job includes the cost of material and labour charges for skilled and semi-skilled workers deployed for execution of work.Testing Commissioning:-Testing commissioning of the newly installed pumping units pump room along with allied starting and controlling devices for their smooth functioning. Rectifying the faults noticed during testing and also setting, adjusting the instruments of the panel Board , LT Control Panel and tightening of each cable thimbles of electrical points of stabilizer, main switch, starters and motors and realignment/leveling of pump & motor and checking the leakage of water from suction and delivery line if any. Job includes labour charges for skilled and semiskilled workers deployed to complete the job. |
| 77 | Providing of submersible pumping unit ( 2 Nos) along with submersible motor ( kirloskar/KSB/CRI/Crompton or any other reputed make) and cable of required length ( Havels/phonolex/any other reputed ISI marked make) , MUG starter of suitable capacity( L&T, KSB, Crompton/Kirloskar or any other reputed make), including carriage up to actual site using mechanical transport , by head load or other means.Submersible PumpSet: -InstallationM.S. Adopter(2 nos): -Fabrication of graded M.S. adopter of Required dia of requisite length by way of welding of M.S. flange Required dia. at one end of the adopter and making outer threads on the other end of the adopter. The threads on the adopter should be properly meshing with inner thread of discharge outlet of submersible pump set so as to make an air tight fitting. Fitting firmly the threaded end of the adopter in the discharge outlet of the submersible pump set. The job includes cost of material and labour charges and hire charges of welding set etcTie Rod Clamp( for 2 nos pump sets): -Providing/fabrication of tie rod clamp fabricated out of 40 mm x 6mm M.S. flat and fitting of the tie rod clamp to the submersible pump set with the help of heavy duty bolts and nuts welded on the side of the clamps. Job including list of material and labour charges.Column Pipe: -Fabrication of GI column pipes of length 10 ft. each, out of Required dia. GI pipes by way of cutting GI pipes in required lengths and then providing and welding MS flanges to each end of the pipe lengths in a precise manner exactly perpendicular to the column pipes around the periphery. Job including cost of welding rods, labour charges, hire charges of welding set, gas cutting set as well as to and fro carriage charges of column pipes to work shop for beveling of pipe ends for proper welding the flanges.Submersible Copper Cables: -Providing and fitting of submersible cable of required capacity.Making of leak proof joints of submersible copper cables on motor side using patch roles & insulating tapes for connecting each lead of three core of submersible copper cables (2 no’s.) coming from motor with their respective leads of three core copper cables (2no’s) which further to be connected with terminals of star connection arrangement and delta connection arrangement at the motor starter after proper thimbling. The job includes cost of &labour charges. The submersible cables to be extended from borewell to panel board.Lowering Installation: - Lowering of submersible pump set fitted with adopter and tie rod clamp along with fitting and lowering in sequence 12/13 nos. column pipes Required dia (Each 10 ft.long) one by one and the 3 core submersible copper cables (2 lengths) in the tube well. The job includes placing one column pipe over the other in sequence and connecting with each other by tightening the nut bolts at the flanges with providing & insertion of rubber joint in between the flanges for making leak proof joints of the column pipes and lowering into the tube well step by step with the help of column pipes holding clamps and chain pulley block. The top most column pipe is to be connected with delivery line (to tank/to distribution) of the pump set by way of providing and inserting in between 900 M.S. bend and fitting one end of M.S. bend on the M.S. column pipe and other end to the delivery lineby fastening the nut-bolts of the flanges. Job includes cost of materials i.e. rubber joints and nut-bolts of the column pipes required for replacement of worn out nut-bolts and labour charges.Panel Board: - Fabrication of panel boardout of MS angle, MS flats and plyboard with mica on one side of suitable size to be wall mounted for installation of MUG Starter, Main Switch, Volt meter, Ampere meter with selector switches and CT’s in the room near the borewell. Job also includes installation testing and commissioning of voltage stabilizer of suitable capacity.Testing Commissioning: - Providing and fitting of proper sized thimbles to each lead of 3 core submersible cables coming from motor and then connecting the leads to their respective terminal of star and delta arrangement formation on the motor starter and then connecting with three phase power supply by putting on the main switch and motor starter respectively. Complete job including cost of material and labour charges.Fabrication of tripod stand:- Fabrication of tripod stand out of 80mm dia GI pipes of 6 m length along with steel wire rope shllings for extraction and lowering of submersible pump set. Along with proving and fitting of 3 ton capacity manually operated chain pulley block |
| 78 | Installation of High Mast Light:- Design /Supplying/ Installation/ Testing and commissioning of 8Mtr.high mast light with in premises of each pumping stations. The pole to be painted with one coat of primer and two coats of silver white aluminum paint and underground section of the pole is to be painted with one coat of primer and two coats of black enamel paint both inner and outer side. The pole is to be erected by excavation of 5 feet x2 feet x2 feet pole {pit including making foundation in cement concrete in the ration of 1:3:6 (1 cement: 3 coarse sand :6 graded stone, 40mm dia nominal ). The foundation is to be continued upto 0.5 Mtr. feet above ground level around the pole tapered suitably in to the collar in round shape of 0.5 M dia. The exposed portion of the block is to be plastered properly and whitewashed. The job includes excavation of pole pit, refilling and removal of excavated material from site and properly disposed off. The also includes P/f of 4x150 watts LED lights along with bracket for fixing of lights and making provision for to up/down the fittings during maintenance in future, Job includes supplying Aluminum flat cable 2x10 sqmm approximately 30mtr and p/f of single pole MCB for each fitting along with SPN25/32 amp in MS box fitted with pole. Complete job includes cost of material and carriage charges and fitting charges at site. towards input side of the light. with box to ON/OFF of light, complete , complete job in all respects. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender