Tender For Govt High School Sk Payeen (Construction Of Science Room, Art Craft Room And Library).
Tender Value
59.08 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
4 days left
EMD
1.18 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganderbal → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Govt High School Sk Payeen (Construction Of Science Room, Art Craft Room And Library).
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. (Ordinary rock) |
| 2 | Earth work in excavation by Mechanical in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m. |
| 4 | Providing and laying of stone soling hand packed tightly including watering, ramming and all carriages as involved upto site of work complete |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level. M-7.5 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate) 40mm nominal size crushed in foundation and under flooring, all work including carriage of material |
| 6 | Providing and laying in position specified grade of reinforced cement concrete in 1:1.5:3 mix including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level including carriage complete. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – all works upto plinth level: M-15 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size crushed ) including carriage of material |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Brick work with common burnt clay (non modular) bricks class designation 75 in in superstructure above plinth level upto floor five level including curing in 1:6 cement mortar |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for:-Foundation ,footings,bases of columns |
| 11 | suspended floors, beams,lintels |
| 12 | Lintel, beams, plinth beams, girders, and cantilevers. |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete using Thermo-Mechanically Treated bars including carriage upto site |
| 14 | Structural steel work welded in built up section for trusses and framed work including soffit and eves cutting hoisting, fixing in position anchor bolts and applying a primer coat of approved steel primer, including carriage of material upto site of work |
| 15 | 12mm thick Cement Plaster on inner and outer walls 1:4 (1 Cement:4 fine sand) on all surfaces (walls, ceiling and RCC surfaces) complete job |
| 16 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate Including cost of carrriage and head loads . Etc complete . |
| 17 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 18 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position using structural steel etc. as required. including applying priming coat of approved steel primer, and two coats of anti-corrosive black colour paint all job complete. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (for railings) |
| 19 | Providing and fixing imported wood work (K.D) in frames of doors, window, clerestory windows and other frames, wrought framed and fixed in position. |
| 20 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. imported wood work (K.D)(30 mm thick) |
| 21 | Providing and fixing wire gauge shutters for doors, windows and clerestory windows using 1.5mm thick wire including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. imported wood work (K.D)(30 mm thick) |
| 22 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, using imported wood (KD) including same kind of wooden panels, including ornamental moulding, as directed, including all accessories a, all complete as per direction of Engineer-in-charge. (32-35 mm th) |
| 23 | Providing and fixing of Hardware Fittings For Doors & Windows:P&F 40 x 5 mm flat iron hold fast 40 cm long |
| 24 | Providing and fixing bright finished brass handles with screws etc. complete With a grip length of 125 mm |
| 25 | With a grip length of 75 mm |
| 26 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. : 6\\" |
| 27 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :4\\" |
| 28 | P&F approved quality Solid iron Aldrop rod lock 200 mm or larger |
| 29 | Providing & fixing of Float glass panes 4mm thick glass pane (weighing not less than 10 kg/sqm) including beading and all other accessories as directed by EIC |
| 30 | Providing and fixing color coated Hi Rib 0.50mm sheet roofing fixing with self driven screws of required size including epoxy seal overlapping of sheets complete (up to a pitch of 60 degrees) excluding the cost of purlins rafters and trusses. |
| 31 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth 2 mm thick complete. |
| 32 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 33 | Finishing walls with water proof cement paint of approved brand and manufacture of required shade 2 or more coats |
| 34 | Applying priming coat on new wood and wood based surface with ready mixed wood primer |
| 35 | Painting with synthetic enamel paint of approved brand and manufacture of required shade and colour to give smooth finish with two or more coats on new wood and based surfaces |
| 36 | Providing/fixing 20 mm or 25 mm dia pvc conduit pipes,junctions, fan boxes, light boxes etc for electric fittings including embedding all complete job as directed |
| 37 | Carriage of material from source to site : sand for a lead of 10km |
| 38 | Aggregate below 20mm for a lead of 25km |
| 39 | Bricks for 60 km lead 60km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender