Tender For Upgradation Of Inspection Hut At Daksum
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Aug 2026
6 days left
EMD
29760
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Inspection Hut At Daksum
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles above 25 mm and upto 40 mm. |
| 3 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil |
| 4 | P/L of stone soling incl. ramming,hand packing and all carriages, complete job in room fill,trenches,foundation etc. |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mat |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at plinth beam level and DPC level Thermo-Mechanically Treated bars of grade Fe-500D or more.Reinforcement @ for all rcc work |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete. |
| 10 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.30 mm KD wood or equivalent. |
| 11 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineerin-charge :35mm KD wood or equivalent. |
| 12 | Providing and fixing extra for using Stainless Steel Grade 304 wire gauge with 0.50 mm diameter stainless steel wire mesh in place of galvanized M.S. wire gauge with 0.63 mm diameter wire for doors, windows, ventilators, and clerestory windows, including necessary screws, fixing accessories, cutting, fitting, and all incidental charges complete. Shutter area shall be measured for payment. |
| 13 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm |
| 14 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 150x10 mm |
| 15 | Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete : |
| 16 | CEMENT PLASTER (IN FINE SAND)12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 17 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 18 | Providing and fixing PVC wall panelling with a thickness ranging from 7 mm to 9 mm, available in multicolor. The panelling shall be of an imported brand, featuring a core filling with beading for added strength and aesthetic appeal. The PVC panels shall have a fire rating of FR, making them fire-resistant, and shall be fully waterproof, suitable for both interior and exterior applications. The panels shall be UV-resistant, preventing color fading and degradation over time, and shall have high impact resistance to withstand daily wear and tear. The installation shall include all necessary accessories, such as trims, screws, and adhesive, ensuring a secure and seamless finish. The rate shall include complete installation, including cutting, fixing, and carriage up to the site of work, ensuring a high-quality and durable finish. |
| 19 | skilled plumber for execution of plumbing works including installation, repair, and testing of water supply, drainage, sanitary fittings, and associated piping as per site requirements and engineer’s instructions. |
| 20 | Providing skilled carpenter services for repair and maintenance of doors, including adjustment, refixing, alignment, replacement of damaged wooden parts, repair of shutters, frames, locks, handles, hinges, tower bolts, door closers, and allied works, complete with tools, labour, and minor consumables as directed by the Engineer-in-Charge. |
| 21 | Providing & Supplying of furnishing item:-A)-Sleeping Pillow 24\\" x 16\\", 900g microfiber fill, cotton cover |
| 22 | Providing & Supplying of furnishing item:-B)-Reversible Comforter (AYKA or equivalent)Reversible Comforter (AYKA or equivalent) 60\\" x 90\\", 500 GSM microfiber, dual color |
| 23 | Providing & Supplying of furnishing item:-B)-Blanket 220 cm x 150 cm, 250–500 GSM fleece |
| 24 | Providing & Supplying of furnishing item:-D)-Bedsheet Set (Double) 90\\" x 100\\", cotton blend, 250 TC, 1 bedsheet + 2 pillowcases |
| 25 | Providing, supplying, fixing, testing, and commissioning a complete solar inverter system comprising 01 No. 3 kVA pure sine wave inverter, 03 Nos. 12 V 200 Ah tubular batteries, 03 Nos. 250 W Mono/Polycrystalline solar panels (total solar capacity 750 Wp), MPPT charge controller, battery interconnecting cables, DC/AC wiring, connectors, protection devices, and heavy-duty powder-coated steel mobile trolley with lockable wheels, complete with all fittings, accessories, testing, and commissioning. The inverter, batteries, and solar components shall be of approved make such as Luminous, Exide, Microtek, or equivalent and conform to relevant BIS standards |
| 26 | Providing and Supplying of premium quality kitchen crockery comprising Tea & Coffee Set and Dining Set, suitable for residential/commercial use. (15-piece porcelain tea set (cups, saucers, kettle) make Clay Craft or equivalent.) |
| 27 | 33-piece opalware dinner set make La Opala Novo or equivalent. |
| 28 | Providing and fixing Crompton CHAMP PLUS I Residential Water Pump Self Priming Regenerative 1 HP Single Phase or equivalent or equivalent incl. all fittings and fixtures' |
| 29 | CERAMIC GLAZED TILESProviding and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 30 | Providing and fixing thermal insulation to underground PVC water tank using 25 mm thick XLPE/Nitrile Rubber Foam/Extruded Polystyrene (XPS) insulation boards of approved make, including surface preparation, adhesive bonding, protective HDPE/geotextile layer, sealing of joints, cutting, fitting, and all necessary accessories complete as per manufacturer's specifications and directions of the Engineer-in-Charge. |
| 31 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000 ltrs |
| 32 | VITRIFIED FLOOR TILESProviding and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 33 | Providing and fixing wooden panelling 12mm thick over frammingwork of required pattern and design water proof strips of ply boardimported wood panelling for ceiling/walling(imported wood/RAITwood) incl ply wood framing. |
| 34 | Providing and fixing approved quality premium vinyl/PVC washable wallpaper of approved shade, texture and pattern, having minimum 300 GSM thickness with paper/non-woven backing, moisture resistant, anti-fungal, stain resistant and scrubbable finish, fixed over properly prepared smooth wall surface using recommended adhesive, including surface preparation, cutting, matching of patterns, edge finishing, necessary tools, scaffolding, wastage and complete in all respects as per approved design and direction of Engineer In-charge. |
| 35 | Providing and fixing plywood made of commercial quality ISI marked plywood of 12 mm thick, conforming to IS:303, termite and borer resistant, boiling water-resistant (BWR grade), waterproof with smooth both-side finish. The plywood shall be cut, dressed, jointed, and fixed in proper alignment over the supporting framework as per approved design and directions of the Engineer-in-charge, complete in all respects |
| 36 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately.Chaar Gul |
| 37 | Providing and applying touch-up wood polish on existing wooden surfaces, including sanding, filling minor cracks/imperfections, and applying 1–2 coats of approved synthetic enamel or wood polish, complete in all respects as directed by the Engineer-in-Charge. |
| 38 | Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters including fixing with necessary screws etc. completeDouble strip (Horizontal type) |
| 39 | Providing and fixing 100 mm long stainless steel (SS-304 grade) fancy cabinet handles for kitchen cabinets, drawers, and shutters, of approved design and finish (satin/matt/brushed steel), including all necessary screws, fittings, accessories, drilling, alignment, fixing, and making good any damage to cabinet surfaces, complete as per approved specifications and directions of Engineer-in-Charge. |
| 40 | Providing and fixing 65 mm brass cupboard lock, 6-lever type, of approved make and quality, complete with matching brass/steel keys (minimum 2 Nos.), screws, strike plate, escutcheon, and all necessary fittings and fixtures. The lock shall be fixed to wooden cupboard shutters, cabinets, wardrobes, or similar joinery work, including cutting, recessing, drilling, alignment, testing, and making good the surface, complete as per manufacturer's specifications and directions of the Engineer-in-Charge. |
| 41 | Providing and fixing first-class marine grade plywood with a thickness of 19 mm for internal and external wall lining work. The plywood shall have a density of 811 kg/m³ (observed value) and shall be ISI marked to ensure quality. It shall include a 20-year replacement warranty and shall have a moisture content ranging from 5-15% (criteria) with an observed value of 9.2%. The plywood shall be water-resistant, with a perpendicular to grain strength of 34.5 N/mm² (observed value), exceeding the minimum criteria of 25 N/mm². It shall also have a glue adhesion in the dry state of at least 1350 and resistance to water with an observed value of 1233, surpassing the minimum required 1000. The parallel to grain strength shall be a minimum of 40, and the plywood type shall meet the criteria with observed values for various properties, ensuring durability and performance. The rate shall include nails or required gluing work and carriage up to the site of work |
| 42 | Providing and fixing premium quality natural Teak veneer (minimum 0.6 mm thick) over plywood surfaces, including preparation of surface, application of approved adhesive (Fevicol SH or equivalent), edge lipping, necessary pressing, sanding, polishing/melamine finish, and all required materials, tools, labour, fittings, and accessories complete to achieve a smooth and uniform finished surface as approved by the Engineer-in-Charge. |
| 43 | Providing and fixing pvc edge beading for side edges of cubboard shutter for finish surface with a width of 20 to 40mm of roll having a length of 80m with having a single sided finish including glue for fixing as per engineer in charge. Complete |
| 44 | Providing and fixing artificial grass floor mat of approved quality made of UV-resistant polyethylene/polypropylene fibers with pile height 20–40 mm, density not less than 13,000 stitches/m², having SBR latex backing with proper drainage holes, water proof including surface preparation, cutting, laying, jointing with adhesive/tape, finishing complete as per site requirements. |
| 45 | Providing, supplying, assembling, and installing an Outdoor Garden Patio 6-Seater Furniture Set comprising 1 No. center table and 6 Nos. matching chairs, manufactured from UV-stabilized HDPE synthetic rattan wicker woven over a powder-coated galvanized steel/aluminium frame, weatherproof, waterproof, rust-resistant and suitable for outdoor use. The table shall be approximately 1500 mm × 900 mm × 750 mm high with tempered glass top, and chairs shall be provided with high-density foam cushions upholstered in outdoor-grade fabric, complete with all fittings, fasteners, transportation, assembly, and installation as directed by the Engineer-in-Charge |
| 46 | Providing and supplying one complete Sofa Set consisting of one 3-seater sofa, two single-seater sofas and one centre table, suitable for lobby/lounge use, with sofa frame fabricated from kiln-seasoned and chemically treated teak wood/hardwood sections of minimum size 75 mm × 38 mm, reinforced with necessary supports, screws and adhesive joints, seat and back provided with heavy-duty elastic webbing/jalebi springs, upholstered with approved premium quality fabric/leatherette, seat cushions comprising minimum 100 mm thick high-density PU foam (40–45 kg/m³ density), backrest and armrests with 50–75 mm thick PU foam, complete with removable cushions, stitching, piping, polishing and finishing. The 3-seater sofa shall measure 2100 mm (L) × 850 mm (D) × 850 mm (H) with seat height of 450 mm; each single-seater sofa shall measure 900 mm (L) × 850 mm (D) × 850 mm (H) with seat height of 450 mm; and the centre table shall measure 1200 mm (L) × 600 mm (W) × 450 mm (H), made of solid wood/engineered wood with decorative laminate/veneer finish and 12 mm thick toughened glass top, including all hardware, transportation, loading, unloading, installation and all incidental charges complete as directed by the Engineer-in-Charge. |
| 47 | Providing and supplying portable LPG gas room heater of approved make and model, compact in design and suitable for indoor heating applications, operating exclusively on LPG fuel. The heater shall be fitted with high-efficiency ceramic infrared heating elements enclosed within a protective housing, ensuring safe operation without open flames or exposed heating elements. The unit shall be equipped with piezoelectric ignition, adjustable heat control, flame failure safety device, oxygen depletion sensor (ODS), anti-tilt safety switch, and all standard factory-fitted accessories. The heater shall provide economical and efficient heating and be suitable for residential, office, and commercial applications, complete as per manufacturer's specifications and directions of the Engineer-in-Charge. |
| 48 | TRUSSProviding corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 49 | Providing, supplying, installing, testing and commissioning of Kent Grand RO Water Purifier or equivalent approved make (Aquaguard/Kent), wall-mounted type, having RO + UV + UF + TDS Control purification technology, suitable for purification of municipal, tap and borewell water, complete with food-grade storage tank, sediment filter, activated carbon filter, RO membrane, UV chamber, UF membrane, TDS controller, inlet and outlet connections, necessary fittings, accessories, brackets, electrical connections, first filling, testing and commissioning, complete in all respects as directed by Engineer-in-Charge. The purifier shall have minimum 8 L storage capacity and 20 LPH purification capacity. |
| 50 | Providing, supplying, assembling, and installing a 6-seater dining table set made of seasoned solid Sheesham wood with Honey finish, consisting of one dining table of size 1500 mm × 900 mm × 760 mm with 25 mm thick tabletop and six cushioned chairs of size 450 mm × 500 mm × 950 mm, complete with melamine/PU polish, anti-termite treatment, upholstery, hardware, transportation, and installation, as approved by the Engineer-in-Charge. |
| 51 | Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.00 mm thick with zinc coating not less than 275 gram/m2 |
| 52 | Providing, supplying, testing, and commissioning a 3 kVA (3000 W) self-start petrol generator set with 230 V single-phase output, AVR, battery, overload and low-oil protection, 12–15 litre fuel tank, noise-reducing enclosure, wheels, control panel, fuel gauge, all accessories, fittings, testing, commissioning, and minimum 2-year warranty, complete in all respects. |
| 53 | Providing and fixing Decorative Botanic Metal Cluster Ceiling Lamp comprising powder-coated metal frame with botanical/leaf-pattern design, multiple LED lamp holders (E27/G9 or equivalent), suspended ceiling mounting arrangement, wiring, connectors, canopy, fixing accessories, testing and commissioning, complete as approved by the Engineer-in-Charge. |
| 54 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications:Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm. |
| 55 | Providing and fixing 3 layer PP-R (Polypropylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge.PN-16 pipe , 25mm OD(SDR-7.4) providing and fixing of 50% of item above |
| 56 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 57 | Providing and fixing 8 mm dia Chrome Plated Brass / Stainless Steel Health Faucet (Jet Spray) with trigger-operated nozzle, complete with 1.0 metre long flexible stainless steel braided tube, wall hook, stainless steel triangular mounting plate suitable for European type W.C., connectors, screws, anchors, and all necessary fittings and fixtures, including testing and commissioning, complete as per manufacturer's specifications and directions of the Engineer-in-Charge. |
| 58 | Providing, fixing, testing and commissioning mainline sediment water filter assembly comprising heavy-duty polypropylene (PP) filter housing with 10-inch, 5-micron spun sediment filter cartridge, suitable for installation on domestic water supply lines fed through 1 HP to 2 HP pumping systems. The unit shall be complete with 1-inch inlet and outlet connections, mounting bracket, housing wrench, sealing rings, nipples, valves, clamps, and all necessary fittings and fixtures for effective removal of sand, silt, rust, and suspended particles from water, complete as per manufacturer's specifications and directions of the Engineer-in-Charge. |
| 59 | Providing and fixing 15 mm (½ inch) dia stainless steel braided flexible connection pipe, comprising EPDM/PVC inner tube reinforced with high-quality SS-304 black-coated braided wire mesh, complete with brass end fittings, rubber washers, nuts, nipples, connectors, and all necessary accessories for connection to sanitary fixtures, cisterns, health faucets, water heaters, wash basins, sinks, and other plumbing fixtures, complete as per manufacturer's specifications and directions of the Engineer-in-Charge |
| 60 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.PN-16 pipe, 40mm OD (SDR-7.4) |
| 61 | P/F of Geysers 50-Litre 2000-Watt Storage Water Heater (White) incl. all fittings and fixtures make: venus, jacquar , racold or equivalent. |
| 62 | P/F of Geysers 25-Litre 2000-Watt Storage Water Heater (White) incl. all fittings and fixtures make: venus, jacquar , racold or equivalent. |
| 63 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore |
| 64 | Providing and fixing 15 mm nominal bore C.P. brass bib cock ofapproved quality conforming to IS : 8931 |
| 65 | Providing and carrying out repair works for dampness in wall surfaces, including scraping of loose plaster/paint, application of waterproofing chemical coating (cementitious/polymer-based), re-plastering with 1:4 cement-sand mortar mixed with waterproofing compound, curing, finishing with putty. complete in all respects as per engineer’s direction |
| 66 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 67 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 68 | Providing and fixing electrical components. All the installation should comprise of fixing the necessary conduits,wiring,switches,MCBs, panell board,lights,fans etc.Make : anchor, havells,goldmedal etc. Light points Bulbs Only |
| 69 | Exhaust Fan |
| 70 | Exhaust Fan |
| 71 | Providing and carrying out repair of electrical wiring on wall surfaces, including removal of damaged PVC channels, supply and fixing of new ISI-marked rigid PVC channel (minimum 25 mm × 25 mm, heavy-duty, white/ivory finish) with cover, refixing/replacement of copper wiring (1.5–2.5 sqmm), proper insulation, junction box connections, switches/sockets as required, alignment, and finishing with patch repair of wall surface, complete as per engineer’s direction. |
| 72 | Carriage of different materials by Mechanical transport incl. loading, unloading and for stacking at site @ 30KM (Sand) |
| 73 | steel |
| 74 | cement |
| 75 | Aggregate |
| 76 | Carriage of different materials by Manual labour incl. loading, unloading and for a lead of 100 mt (Sand) |
| 77 | Steel |
| 78 | Cement |
| 79 | Aggregate Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender