Tender For Ms Jacketing Of 600Mm & 300 Mm Dia Ms Distribution Main Over Bagmari Khal Along Biren Roy Road (West) Banerjeehat More Within Ward No 22 Under Mahestala Municipality.
Tender Value
3.13 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
6 days left
EMD
6500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas South → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Ms Jacketing Of 600Mm & 300 Mm Dia Ms Distribution Main Over Bagmari Khal Along Biren Roy Road (West) Banerjeehat More Within Ward No 22 Under Mahestala Municipality.
BOQ
| Sl. No. | Item Description |
| 1 | Supply of steel plates 10mm |
| 2 | Fabrication of M.S.Specials of different dia meter in shop out of 8 mm to 12 mm thick M.S. plates supplied departmentally, cutting the plates to exact size & shape by gas cutting device and/or byadopting any other approved type mechanical means, bending the same in true curvature by template and rolling machine of approved design including proper marking, leveling joints followed by electric arc welding longitudinal and circumferential, as necessary, using standard electrodes as per I.S. specification including edge preparation, electricity charges and hydraulic testing of the fabricated piece all complete as per specification and direction of the Engineer-in- Charge. ( The EIC shall approve the electrodes for arc welding before use.) |
| 3 | Diameter from 450 mm & upto 600 mm.8mm thk plate |
| 4 | Gas cutting of M.S. pipes and/or M.S. plates of different thickness all complete as per specification and direction of the Engineer-in-Charge. |
| 5 | i) 5mm to 8mm thick plate. |
| 6 | Field welding of M.S. plates by means of electric arc welding as per relevant I.S. specification using standard electrodes including edge preparation and charges of deploy-ment of electric generator set with fuel, lubricant and all other tools and plants all complete as per speci-fication and direction of the Engineer-in-Charge. [The Engineer-in-Charge shall approve the electrodes for arcwelding before use] |
| 7 | i) 8mm thick plate. |
| 8 | Coating of 'Epoxy' Resin of thickness not less than 160 micron with a low- viscosity, crystallization-resistant epoxy resin base with a reactive diluents combined with high build epoxy amine adducts as per BS 5493 standard and a polyamide or amido polyamine or any other suitable hardener. It shall react with epoxy resin at normal ambient temperature, suitable for solvent-free coatings as per recommended proportion for use on metal, concrete and wood surface to protect from corrosion as well as damage from chemical reaction after making the surface free from dust, oil and moisture etc. all complete as per instruction and to the satisfaction of ElC. [ This item will be operated on prior permission from the concerned SE/Dy Chief Engineer] |
| 9 | Application of two coats of Epoxy primer as per BS 5493 by brush on the cleaned dry concrete surface with epoxy resin primer with reactive suitable hardener mixture as per specification and direction of EIC all complete. [ This item will be operated on prior permission from the concerned SE/Dy Chief Engineer] |
| 10 | Supplying. fitting and fixing air valve splash plate useing 24 mm thick MS plate) according to necessary site measurement as per direction of EIC |
| 11 | Cast iron kinetic double orifice type air release valve having small orifice elastic ball resting on gun metal orifice nipple large orifice vulcanite ball seating on moduled seat ring, valve with built-in-Kinetic features, isolating sluice valve mounted in horizontal position and operated by a metre wheel gearing:inlet faced and drilled to IS 1538 Table 4 & 6. valve suitable formaximum working pressure of 10 kg/CM2 |
| 12 | 100mm dia |
| 13 | Supply and delivery of CIDF sluice valve (Special type) PW-1.00 of different dia make with CIdouble flanged non rusting spindle sluice valves conforming to IS 14846 -2000 with latestemended having body dome/bonnet and cover of C.I.Gr-F.G 210mtr. spindle of IS-6603 G.R 12/Gr-13 non-magnetic, nuts seat rings are of Gunonetal as per IS:318 LTB-2 flanges and drilledto IS:1538 Part IV & VI valves are suitable for max. working pressure of 10kg/cm2(seat test) and body tested to 15kg/cm2. |
| 14 | Hire & labour charges for diesel generating set for lighting including fuel, 300 m wire 11 points with 200 watt bulb with post for hanging & maintaining the same for day & night for the period. |
| 15 | Dewatering by pumps including all leads, lifts and making all arrangements of disposal, where continuous flow of water from a source other than natural or ground water is encountered in case of emergency maintenance works related to leakage, breakage and making wet connections. |
| 16 | Added:- @ 1% as labour cess |
| 17 | Added:- @ 18% as GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender