Tender For Special Repair Of Building No P-954, Chinar Auditorium At Bb Cantt, Srinagar In The Aor Of Age B/R-I Under Ge 864 Ews
Tender Value
1.45 Crore
Estimated cost
Bid Submission
24 Aug 2026
8 days left
EMD
2.20 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair Of Building No P-954, Chinar Auditorium At Bb Cantt, Srinagar In The Aor Of Age B/R-I Under Ge 864 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 2 | M&L for 25 mm thick cement concrete 1:2:4, type B0 (using 12.50 mm graded stone aggregate), as in sub base of floor complete all as specified and directed. |
| 3 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 4 | M&L for Non skid/mat finish ceramic tiles/mat finish tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement to match over and including 15mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 5 | M&L for non skid ceramic tiles/mat finish tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive vertical tiles complete all as specified and directed. |
| 6 | M&L for glazed ceramic coloured tiles in vertical surface 600x300 and 7mm thick over and including 10mm thick rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 7 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc. laid bedded and pointed in any mortar, complete all as specified and directed. |
| 8 | M&L machine cut Kota stone slab flooring 20-25mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 15mm thick screed bed of cement mortar 1:6 including rubbing and polishing complete all as specified and directed. |
| 9 | M&L machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and cement slurry including 10mm thick cement plaster 1:3 CM to receive Kota stone and jointed rubbing and polishing complete all as specified and directed. |
| 10 | M&L for granite (of any type) work table rubbed and polished 18-20 mm thick machine cut, in steps, jams, pillars, window cills, cooking platforms and like laid and bedded over 15 mm thick cement mortar in cement mortar 1:6 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 11 | Rounding the edge of stone slabs one edge such as in steps, cooking platforms, and the other similar situation, complete all as specified and directed. |
| 12 | Demolition of brick or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facing, dressed stonework and precast concrete articles complete all as specified and directed. |
| 13 | M&L for brick work with subclass B bricks, straight or curved on plan exc 6.00 mtr mean redius, built in cement mortar 1:6 complete all as specified and directed. |
| 14 | M&L for brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. |
| 15 | M&L taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 16 | Refixing of 15mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. |
| 17 | M&L for 15 mm dia tubes medium grade galvanised with all fitting and fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 18 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 19 | Refixing of 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc. complete all as specified and directed. |
| 20 | M&L for 20 mm dia tubes, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-charge. |
| 21 | M&L for lagging upto 20mm pipes used in internal water supply or plumbing all round with, 25 mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and as directed by Engineer-in-charge. |
| 22 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall complete all as specified. |
| 23 | S&F for rotational moulded triple layered polyethylene water storage tanks 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old unserviceable tank complete all as specified and directed. |
| 24 | S&F for rotational moulded triple layered polyethylene water storage tanks triple layer 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old unserviceable tank complete all as specified and directed. |
| 25 | S&F in repairs gun metal gate valves 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 26 | S&F in repairs ball valves 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. |
| 27 | S&F in repairs 100 mm bore Traps 'P' or 'S' complete all as specified and directed. |
| 28 | S&F in repair vitreous china squatting pan, 'Orissa' pattern, size 580mm x 440 mm white, with integral foot rests complete including provision of lime concrete bedding complete all as specified and directed. |
| 29 | S&F in repairs vitreous chinaware wash down water closet pan pedestal pattern One Piece floor mounted EWC with UF Soft close slim seat cover, hinges, fixing accessories of seat of size 380x655x765mm, P trap 180mm & cistern with fittings complete all as specified & directed.Make: Jaquar Cat No: LYS-WHT-38751P180UFSM, Cistern : 38751P250UFSM or equivalent |
| 30 | S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 31 | S&F in repairs PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 32 | S&F in repairs Vitreous China wash basin, white , flat back, size 550x400mm fixed on existing brackets or stands including 32mm PVC waste coupling, waste pipe, complete all as specified and as directed. |
| 33 | S&F in repair vitreous china oval bowl shape counter wash basin (white) of size 560mmx400mmx205mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe fitting etc. complete all as specified and directed. Make : Cera/Hindware/Parryware/Jaquar or equivalent etc. all as specified as directed. |
| 34 | S&F in repair Vitreous China urinal with integrated EFS, of size 360x330x740mm full stall type, white complete including providing and fixing all metallic components of the urinal are stainless, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in sealant; fixing flush pipe, grating and Union for discharge pipe complete all as specified and as directed.Make: CERA Cat part No S4010101 or equivalent of approved makes |
| 35 | S&F in repair 15 mm bore stop valve/angle valve chromium plated with long shank and cup (concealed type), cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 36 | S &F in repairs 15mm dia bib taps fancy type, long body, Chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 37 | S&F in repair 15mm dia pillar taps swan neck type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flu-nuts screwed for iron pipe complete all as specified and directed. |
| 38 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and directed. |
| 39 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm, complete all as specified and directed. |
| 40 | S&F in repair wall mounted rectangle decorated sides frame work corrosion free looking mirror glass of any size but 6-8mm thick of selected quality glass, including all brass fitting accessories complete all as specified and directed by Engr-in-Charge. |
| 41 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers including glass self assembly complete all as specified and directed. |
| 42 | S&F in repair CP health faucet with 1.20 mtr metallic expandable tube & hook complete all as specified and directed. |
| 43 | S&F in repair CP Jet spray (Butterfly) with 1 mtr tube complete all as specified and directed. |
| 44 | S&F in repair, brass chromium plated shower rose 125 mm size with or without swivel joints, including fixing to steel pipe or union ,complete all as specified and directed. |
| 45 | S&F in repair, stainless steel soap dish, complete all as specified and directed. |
| 46 | S&F in repair, brass CP tubular towel rail of 20 mm dia, D type, 60 CM long between flange, complete all as specified and directed. |
| 47 | S&F in repair toilet paper holder of stainless steel fixed to walls complete all as specified and directed. |
| 48 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified & directed. |
| 49 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor with and including clamps, nut bolts including dismantling of old PVC/AC rain water pipe etc. complete all as specified and directed. |
| 50 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor with and including clamps, nut bolts including dismantling of old PVC/AC rain water pipe etc. complete all as specified and directed. |
| 51 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 52 | S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 53 | Taking down chowkhats or frames/ steel windows/ventilators, not exc 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed. |
| 54 | Taking down chowkhats & shutters (without taking off shutters from the frame), size of opening exc. 1.50 sqm but not exc 4 sqm each complete all as specified and directed. |
| 55 | Taking down shutter of area exc 1 sqm but n exc 2 sqm each complete all as specified and directed. |
| 56 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing complete all as specified and directed. |
| 57 | S&F factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drg complete all as specified and directed. |
| 58 | S&F butt hinges 100mm size extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed complete all as specified and directed. |
| 59 | S&F aluminium handle 125mm size anodised complete all as specified and directed |
| 60 | S&F aluminium anodised barrel tower bolt of 125mm long extruded section and fixed complete all as specified and directed. |
| 61 | M&L for shutters of any description exc 1 sq. m, but not exc 2 sqm each taking down and refixing in same opening after easing and cutting in required length and width with necessary screwing and nailing if required complete all as specified and directed. |
| 62 | S&F 2nd class soft wood plain, solid chowkhats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete, all as specified and directed. |
| 63 | S&F 2nd class hard wood (Hollock) 35mm thick plain framed, factory made panelled shutters (two panel) with lock rail and panel of 12mm veneered/ ornamental wooden board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (part – I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 64 | S&F glazed and skelton shutter IInd class hard wood 35mm thick, open rebated and prepare to receive glass, gauge etc. (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. and including glazing 3 mm thick and fixing wire cloth complete all as specified and directed. |
| 65 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack or galvanised wire staple complete all as specified and directed. |
| 66 | M&L applying two coats of synthetic enamel paint/ french polish over a coat of primer including preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed. |
| 67 | S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 68 | S&F 150mm long aluminium handles, cast type anodised complete all as specified and directed. |
| 69 | S&F 300 mm long mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 70 | S&F aluminium window/ventilator openable/fix type with aluminium anodized frame of section 62.30 x 44.50 x 1.5 mm with shutter stiles rail of aluminium section of size 47.62 x 44.45 x 1.5 mm thick including jointing cleat for fixing binder hardware glazing clips rubber packing for air lock purpose anodized aluminium strip bearing screw etc. for fixing glass pans in frame shutter covered with fully selected quality tinted glass 5.5 mm thick tinted glass with rubber packing complete including fixing of required 125mm tower bolt & handles etc. all as specified and directed. Make: Jindal/Indal/Hindalco. |
| 71 | S&F anodised aluminium powder coated (minimum 50 micron thickness) door shutter with frame, glazed with 5.5mm thick tinted glass including rubber bead, joining cleat for fixing, aluminium door handle 150mm size and tower bolt 200mm size, where required double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing brass pivot, mortise lock vertical type of mild steel 4 levers of size 100mm etc. as mentioned here in below complete all as specified and directed. |
| 72 | S&F powder coated aluminium decorative grill of size of mesh 50mmX50mm fixed with doors, window for safety of glass etc. complete all as specified and directed. |
| 73 | S&F in repair aluminium (Die Cast body) door closer hydraulically regulated designation No 3 universal type suitable for door shutters up to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified & directed. |
| 74 | S&F in repair floor door stopper of size 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floors complete all as specified and directed. |
| 75 | S&F for anodised aluminium frame for doors, windows ventilators (Powder coated) with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. |
| 76 | S&F figured glass 5mm thick, pin head type and glazing with oil putty in square not exc. 0.5 Sqm in each pane complete all as specified and directed. |
| 77 | S&F in repair 20 mm dia stainless steel polished 204 grade drapery rod/curtain rod 1 to 2mm thick with finals decorative, including fixing of brackets and both ends decorative knobs, complete all as specified and directed. |
| 78 | Demolition of cement concrete in ground floors and paving n exc 15 cm thickness (below or above ground level) and removal of debries from MD land complete all as specified and directed.Note : Demolition consider for item No 80 & 81. |
| 79 | M&L for cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in foundation sub base and mass concrete complete all as specified and directed. |
| 80 | M&L for 75 mm thick cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base to paving complete all as specified and directed. |
| 81 | M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed by the Engr-in-Charge.Note: Sand cushioning shall be measured and paid separately. |
| 82 | M&L for sand cushioning 25mm thick for interlocking tiles complete all as specified and directed by the Engr-in-Charge.Note: Only punned thickness shall be measured for payment purpose. |
| 83 | Dismantling of wall and ceiling boards/panels of any type (fiber pulp, insulation, panels etc..) or unsulation boards/slabs, any thickness, including cover fillets complete, all as specified and directed. |
| 84 | S&F aluminium anodised snap grid ceiling of frame size 600x600mm, main Tee section of size 36.5mmx25mm x1.4 mm thick , cross Tee section of size 23.5mm x26.4 mm x1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 2 to 4mm dia GI suspenders including 4mm thick E board ceiling HPSC fixed to aluminium frame complete as per manufacturer's instructions complete all as specified and directed by the Engineer -in- Charge. |
| 85 | S&F 3mm aluminium composite panel (ACP) sheet of any colour fixing in wall panelling, wall cladding including fixing of necessary aluminium frame for fixing sheet and decorated bedding on joints and all corners edges of wall & all joints fill with coloured silicon complete all as specified & directed by Engr- in- Charge. |
| 86 | Dismantling timber scantling 40 Sq cm and over in section in any position as in unframed/framed work complete, all as specified and directed. |
| 87 | M&L 2nd class soft wood (kail) as in scantling clean sawn, complete, all as specified and directed. |
| 88 | S&F 2nd class soft wood plain clean sawn fillets square, rectangular or triangular in section exc 6 & n.exc 13 sqcm secured with nails or brads complete all as specified and directed. |
| 89 | M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in wall complete, all as specified and directed. |
| 90 | S&F 4 to 6mm thick veneered one side decorative plywood, grade 1 (with BWR resin) fixed with screws on wall complete all as specified & directed by Engr-in-Charge. |
| 91 | M&L for Australian wood panelling 10mm thick including 9mm thick BWR plywood on the wall and finally finishing with French polish (two or more coats) and fixed complete all as specified and directed. |
| 92 | Providing and fixing acoustic wall panel in multicolour with lineal perforations and fiber glass acoustical wall panel (size 2100mm length x 450mm wide) manufactured from high density bio soluble resin bonded glass wool absorb or with a series of textile fabric, plain glass tissue backer and fabric wrapped edges. The wooden slats panels shall be non FR grade with melamine laminate panels 2440mm x 128mm x16mm with 2mm slats at 15 mm pitch, tongue and Groove edges for seamless mounting. The back of the panels fixed with 1 acoustical fleece for Sound Absorption. Panel is to be fixed on framework with screw fixed horizontal or vertical to wall at every 600mm with centre & edge bracket in tongue & groove system on framework. The cavity of framework should be inserted with rock wool with 48 kg and 50mm density and alongwith all accessories and direction of Engineer in charge. \\"Make : Armstrong, Saint Gobain & Everest or Equivalent\\"Note : Units rates shall be inclusive of T&P, Scaffolding, lead, lift, cleaning & Preparation of existing surfaces etc and nothing extra whatsover shall be paid to contractor on these aspects. Contractor to quote his unit rates accordingly, no representation whatsover shall be entertained. Please Enable Macros to View BoQ information |
| 93 | Providing and fixing acoustic wall panel in multicolour with lineal perforations and fiber glass acoustical wall panel (size 2100mm length x 450mm wide) manufactured from high density bio soluble resin bonded glass wool absorb or with a series of textile fabric, plain glass tissue backer and fabric wrapped edges. The wooden slats panels shall be non FR grade with melamine laminate panels 2440mm x 128mm x16mm with 2mm slats at 15 mm pitch, tongue and Groove edges for seamless mounting. The back of the panels fixed with 1 acoustical fleece for Sound Absorption. Panel is to be fixed on framework with screw fixed horizontal or vertical to wall at every 600mm with centre & edge bracket in tongue & groove system on framework. The cavity of framework should be inserted with rock wool with 48 kg and 50mm density and alongwith all accessories and direction of Engineer in charge. \\"Make : Armstrong, Saint Gobain & Everest or Equivalent\\"Note : Units rates shall be inclusive of T&P, Scaffolding, lead, lift, cleaning & Preparation of existing surfaces etc and nothing extra whatsover shall be paid to contractor on these aspects. Contractor to quote his unit rates accordingly, no representation whatsover shall be entertained. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender