Tender For Special Repair To Building No T-410 Or Living Accn Otm And Bathroom Cum Toilet In Zone K At Mil Stn Agartala
Tender Value
18.44 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
7 days left
EMD
36880
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
agartala → Tripura
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No T-410 Or Living Accn Otm And Bathroom Cum Toilet In Zone K At Mil Stn Agartala
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Aug-2026 | BOQ | BOQ | 31-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of old AC sheet corrugated / Semi corrugated sheets in wall cladding or in roof covering complete all as specified and as directed |
| 2 | M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified and as directed. |
| 3 | M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified and as directed. |
| 4 | M&L for one coat of synthetic enamelled paint on steel surfaces over 10 cm width or girth including preparation of old surfaces complete all as specified and directed. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 6 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified and directed. |
| 7 | S&F of Fe 290 Gde E-165 for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc all as specified and directed. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding, (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 9 | Material & Labour non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.18sqm but not exc 0.38 sqm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar in cm 1:4 for laying floor tiles,complete all as specified and as directed. |
| 10 | Material & Labour non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.18sqm but not exc 0.38 sqm in Skirting / Daddo etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 10mm thick bedding layer of mortar to wall in cm (1:4) for laying tiles on skirting/dado complete all as specified and as directed. |
| 11 | Material & Labour non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar in cm 1:4 for laying floor tiles,complete all as specified and as directed. |
| 12 | Material & Labour glazed ceramic coloured tiles 350 x 250 x 7 /450 x300x7 mm thick on skiriting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over 10mm thick bedding layer of mortar to wall in cm (1:4) for laying tiles on skirting/dado complete all as specified and as directed. |
| 13 | Demolition of brick work built in cement mortar complete all as specified and as directed. |
| 14 | M&L for Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified . |
| 15 | M&L Brick work with sub class B bricks straight or curved on plan exe 6 m mean radius built in cement mortar 1:4 complete all as specified and as directed |
| 16 | Taking down cement plaster on brick concrete surfaces including racking out joints hacking for key, scrubbing down with, water etccomplete all as specified and as directed. |
| 17 | M&L 15mm thick rendering in CM (1:4) on brick work/ concrete surfaces in two layers (10mm backing coat and 5mm finishing coat mixed with integral water proofing compound @ 3% by wt of cement,) finished even and fair complete all as specified and as directed.(Note: Water proofing compound measured & paid separately) |
| 18 | M&L 10 mm thick rendering in CM (1:6) on than fair faces of brick work or concrete surfaces without using extra cement complete all as specified and as directed. |
| 19 | M&L applying Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) with preparation of new plastered surfaces complete all as specified and directed. |
| 20 | M&L for complete removal of existing treatment on wall surface and Finishing walls with two coat of Acrylic Smooth exterior paint of required shade over a coat of exterior emulsion primer and applying plastrer of paris putty of 1 mm thick over plastered surface even and smooth complete all as specified and directed. |
| 21 | M & L for preparation of new plastered surfaces by and applying two coats of oil bound distemer over a coat of primer on new plastered surfaces complete all as specified and as directed . |
| 22 | M & L complete removal of internal wall finishes by scrapping down and preparation of old plastered surfaces by applying 1mm thick wall care putty and applying two coats of oil bound distemer over a coat of primer on old plastered surfaces complete all as specified and as directed . |
| 23 | Material & Labour for writing letters or figures (block, Roman, Italic or Indian) n.exc.30 cm high complete all as specified and directed. |
| 24 | Supply only liquid water proofing compound |
| 25 | Dismantling ceiling board(fibre pulp insulation) or insulation boards any thickness including cover fillets complete all as specified and as directed |
| 26 | S & F Aluminium anodised snap grid frame work for false ceiling of grid size 605 x 605 mm as specified and suspended with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats complete all as specified and as directed. |
| 27 | S&F for Non asbestos fibre cement building board (E- Board) 6 mm thick for fixed to Aluminium frame work with screws as in ceiling complete as specified and as directed. |
| 28 | M & L for preparation of new unplastered surfaces over ceiling and applying two coats of oil bound distemer over a coat of primer on board complete all as specified and directed. |
| 29 | M&L for 2 coats of synthetic enamelled paint over coat of red oxide zinc chrome on steel surfaces over 10cm width or girth including preparation of new surfaces complete all as specified and as directed. |
| 30 | Taking down chowkat with shutter/without taking off shutter from the frame exe 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified and directed. |
| 31 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x 60 mm complete all as specified and directed. |
| 32 | M&L cement concrete in foundation filling and mass concrete type c-2 1:3:6 (40 mm graded stone aggregate) complete all as specified and as directed |
| 33 | S&F 35mm thick Factory made Flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed. |
| 34 | S&F 35mm thick 2nd class hard wood skeleton shutter open rebated & prepared to receive glass, gauge etc (with out sash bars) edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass, gauge etc complete all as specified and directed. |
| 35 | Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required in Exc. half brick butn exc Full brick complete all as specified and directed. |
| 36 | M&L mild steel work as in holdfast and similar works conforming to Fe290 GDE E-165 complete all as specified and as directed. |
| 37 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 38 | M & L 75mm thick PCC 1:3:6 type B-2 ( 40mm graded aggregate) thick as in plinth protection finishing the surface even & fair whtiout using extra cement with 10 mm joint , filled with bitumen mastic (mix of bitumen and sandin ratio in 1:2) at 3.0m intervals complete all as specified and directed. |
| 39 | Taking down chowkat with shutter/without taking off shutter from the frame n exe 1.50 Sqm each complete all as specified and directed. |
| 40 | S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grained printed PVC sheet used reinforced with MS square tube instead of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed. |
| 41 | S&F factory made solid PVC Moulded door shutter 28 to 30mm thick with particle board coare, 28 to 30mm thick (stiles) 2,4 or 6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face as per specification and drawing complete all as specified and directed. |
| 42 | S&F Butt hinges, extruded aluminum alloy with galvanized MS sheet hinges pin anodized of 100 mm size type B-21. |
| 43 | S&F 150mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and as directed. |
| 44 | S&F 125mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and as directed. |
| 45 | S&F 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed. |
| 46 | S&F 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed. |
| 47 | S&F 100mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed. |
| 48 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 49 | Supply & Fix 100 mm aluminium anodised Hasp and staple, safety type,including bolt to hinge plate fixed with screws |
| 50 | Supply & Fix in Repair 25mm dia mild steel chromium plated curtain rod fixing with brackets, stop, rollers complete all as specified and as directed. |
| 51 | S&F Powder coated aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge and making good the surface complete all as specified and as directed. |
| 52 | S&F Powder coated aluminium louvered ventilators of size 600X600mm with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick Frosted tinted glass fixed in panels with suitable locking arrangements and making good the surface complete all as specified and as directed. |
| 53 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and as directed |
| 54 | M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint, including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and as directed. |
| 55 | M&L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces complete all as specified and as directed. |
| 56 | S&F in repairs 10 Ltr capacity PVC valveless, syphonic action type Flushing Cistern, low level white with inlet ball valve float & handle including brackets & connection to pipes complete all as specified and as directed |
| 57 | S&F in repairs vitreous china wash basin, white, flat back, size 450x300m excluding taps, waste , chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified and directed. |
| 58 | S&F low density polythene (LDPE) pins of pressure rating 6 Kg/Sq cm bore of tube 32 mm for waste pipe of WHB sinks etc.complete all as specified and as directed |
| 59 | S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed . |
| 60 | S&Fin repair for 600X450mm long bevelled edge mirror of selected quality glass mounted on 6mm thick AC building borad or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers with sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long all as specified and directed. |
| 61 | S&F in repair 15 mm stop valves (angular type), cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed . |
| 62 | S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type, 60cm long between flangs complete all as specified and as directed. (Make - Cera/Prayag) |
| 63 | S & F Soap dish, vitreous China white of approximate size 160 x 160 x 90 mm complete all as specified and as directed. |
| 64 | S&F 50mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed. |
| 65 | Taking up or down, steel tubing 20mm bore, and connection including cleaning for re-fixing and removal to store complete all as specified and as directed |
| 66 | Taking up or down, steel tubing 15mm bore, and connection including cleaning for re-fixing and removal to store complete all as specified and as directed |
| 67 | S&f 20mm bore unplasticized PVC pipes of pressure rating 10 kgf/Cm2 fixed complete to walls, ceilings or in floors etc. any type of pipe all as specified and as directed |
| 68 | Supply and fix 15mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe all as specified and as directed. |
| 69 | Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wallcomplete all as specified and as directed |
| 70 | Dismantling water tanks and removing to store of capacity exc 500 & n.exc 1000ltrs etc complete all as specified and directed. |
| 71 | S&F ball valves of 20 mm bore high pressure of PTMT with empxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed complete all as specified and as directed(Minimum weight 20 gms-210 gms) |
| 72 | S & F 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs including taking down the existing fitting complete all as specified and as directed. |
| 73 | Supply and fix in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls only integral water proofing compound complete all as specified and as directed |
| 74 | Supply and fix in repairs110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls only integral water proofing compound complete all as specified and as directed |
| 75 | Supply and fix in repairs 110 mm bore PVC (SWR) bends in any types complete all as specified and as directed. |
| 76 | Supply and fix in repairs 75 mm bore PVC (SWR) bends in any types with acess door complete all as specified and as directed. |
| 77 | Supply and fix in repairs 110 mm bore PVC (SWR) bends in any types with acess door complete all as specified and as directed. |
| 78 | S&F in repairs 110mm dia PVC (SWR) branch piece single (single 'Y'/T) equal or unequal with acess door complete all as specified and as directed. |
| 79 | Supply and fix in repairs 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed |
| 80 | Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully and keep aside for schedule of credit to contactor including making good of the disturbed surfaces, all as specified and directed. |
| 81 | Material and labour for point wiring (concealed type) with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of GI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified as directed. Note for item Nos.1 to 2: (i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate.(ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate (iii) Cost of chase cutting for conduit wiring shall be included in the qouted rate |
| 82 | All as per item No 81 above but for one 3/5 pin 6 Amps socket outlet on the same board with other switches. |
| 83 | All as per item No 81 above but for one 3/5 pin 6 Amps socket outlet on the independent board. |
| 84 | Material and labour for point wiring (Concealed type) with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of GI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board complete all as specified as directed. |
| 85 | Material and labour for switch socket combination multi purpose 2 in 1, 5 Pin,5 and 15 Amps, flush type ISI marked complete all as specified and as directed. |
| 86 | Materials & labour for switch piano flush button 5/6 Amps single pole, 1 way 240 V ISI marked complete all as specified and as directed. |
| 87 | Material and labour for switch socket combination 5 Pin, 6 Amps flush type ISI marked complete all as specified and as directed |
| 88 | Materials and labour for socket out let 5 Pin, 6 Amps flush type complete all as specified and as directed. |
| 89 | Materials and labour for ceiling rose surface bakelite,PVC/poly 65 x 50mm, three terminals complete all as specified and as directed. |
| 90 | Materials and labour for electronic fan regulator (step rotary type), AC 240 volt complete all as specified and as directed. |
| 91 | Supply & fixing MCB DB (Double door) SPN, 12 way sheet steel with bus bar, din rail, neutral link and earth bar with fitting & fixtures including taking down old one all as specified and directed. |
| 92 | Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'B' series with all incoming / outgoing connections with proper size of lugs complete inculding taking down the old unserviceable one all as specified as directed. |
| 93 | Supply and fix MCB single pole & neutral 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete inculding taking down the old unserviceable one all as specified as directed |
| 94 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete complete including taking down old unserceable light fitting all as specified and directed. |
| 95 | Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 100mm C/C both way and two Nos lifting handle made of 12mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete all as specified in electrical plate No 3 of SSR Part-I including taking down old earthing. |
| 96 | Material and labour for sub main wiring with two single core ,1100 V grade ,PVC insulated cable with Copper conducter unsheathed cable of size 4.0 sqmm drawn through & including PVC Casing -N- capping with 4.0 sqmm PVC insulated copper wire single core for continuous earthing after taking out old unservicable submain wiring complete all as directed. Note : Two run of 4.0 sqmm & one run of 4.0 sqmm of cable shall be measured as single run. |
| 97 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Including taking down old unserceable light fitting complete all as specified and as directed. |
| 98 | Supply and fix LED light fitting, 1x10/12w bulk head luminaries, with LED lamp, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size, including taking down the old unserviceable fitting complete all as specified and directed |
| 99 | S & F in repair for sheet metal enclosure single pole and neutral with two pin and earth plug complete with one single pole MCB 20 Amps 240 voltincluding taking down old one all as specified as directed. |
| 100 | Taking down ceiling fans/ of any size and kept in store complete all as specified and directed. |
| 101 | Hanging/refixing ceiling fans of any size complete all as specified and directed. |
| 102 | NOTES :-1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum.2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 31, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender