Tender For Special Repair To Certain Dsc Rest Rooms And Dwo Room Of Hq Wac Under Ge (Af) Subroto Park, Delhi Cantt-10
Tender Value
73.25 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
26 days left
EMD
1.34 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Certain Dsc Rest Rooms And Dwo Room Of Hq Wac Under Ge (Af) Subroto Park, Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-In-Charge. |
| 2 | Material and Labour for vitrified ceramic tiles light shade 9 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed by Engr-In-Charge. |
| 3 | All as per item No 2 above but on vertical surfaces such as skirting/dado etc over and including 10 mm thick plastering in CM 1:4 as in backing coat of tiles complete all as specified and directed by Engr-In-Charge. |
| 4 | Material and Labour for Non-Skid Coloured Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed by Engr-In-Charge. |
| 5 | Material and Labour for glazed ceramic coloured tiles of size 350 x 250 x 7mm/450 x 300 x 7mm thick over and ncluding 10 mm thick rendering plaster in cement mortar 1:4 as in backing coat for tiles on vertical surfaces,set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-In-Charge. |
| 6 | Material and Labour for PCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregates) of 25 mm thick as in levelling course ,finished surfaces even and rough to receive floor finish complete all as specified and directed by Engr-In-Charge. |
| 7 | Taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge |
| 8 | Material and Labour for 15 mm thick rendering plaster in cement mortar 1:6 or other than fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-In-Charge. |
| 9 | Material and Labour for 15 mm thick rendering plaster in cement mortar 1:4 or fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-In-Charge. |
| 10 | Material and Labour for rendering plaster 5mm thick cement mortar (1:3) as in ceiling, soffit of staircase, chhajjas facia etc including cement slurry etc complete all as specified and as directed by the Engineer-in-Charge. |
| 11 | Material and Labour for Preparation of newly plastered or unplastered surface and applying two coats of distemper oil emulsion over a coat of primer on walls complete all as specified and directed by Engr-In-Charge. |
| 12 | Material and Labour for preparation of newly plastered surface and applying three coats of white wash on ceilings complete all as specified and directed by Engr-In-Charge. |
| 13 | Material and Labour for preparing new surfaces of wall and applying exterior paint of required shade,Two coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm, complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Material and Labour for complete removal of existing treatment of old decorated surfaces of walls by steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and washing, rubbing down and stoping of existing surface and making the surface even and smooth and apply Two coats of Ist quality acrylic distemper (ready mixed) having VOC content less than 50 gm/litre of approved manufacturer of required shade and colour over a coat of 1mm thick (average) wall care putty to bring the surface even and smooth complete all as specified and directed by Engr-In-Charge. |
| 15 | Material and Labour for complete removal of existing treatment of old decorated surfaces of walls by steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and washing, rubbing down and stoping of existing surface and making the surface even and smooth and apply two coats of white wash on ceilings complete all as specified and directed by Engr-In-Charge. |
| 16 | Material and Labour for complete removal of existing treatment machanically or mannually on old surface of wall and preparing surface and applying two or more coats 100 % acrylic based exterior emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt reistance 1st quality exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 ltr /10 sqm over and including priming coat of exterior grade primer applied @ 0.90 litre/10 Sqm including change of existing colour if required complete all as specified and as directed by Engineer-in-Charge. note; work will be executed upto fourth floor |
| 17 | Dismantling loose concrete cover of RCC columns, beams, slabs chajjas and the like as directed, roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry, incl derusting of steel reinforcement, providing fabric mild steel wire mesh 50 mm x 50 mm x 2 mm dia as reinforcement to concrete. surfaces shall thoroughly scrubbed with brushes, washed with water and allow to dry . To this surfaces apply chemical polycrete admixture at the rate not less than 2% by weight of cement and providing minimum 30 mm thick (average thickness ) gunniting mix (using 1 part of ordinary Portland cement 53 Grade and 2 parts of Coarse/ghaggar sand mixed with adhesive / admixture at the rate as directed) with a pressure of 2 to 2.5 Kg per Sq cm by gunniting machine and surfaces finished even and fair, incl necessary padding, shuttering / form work and Including 5 mm thick cement plaster in CM (1: 4 ) complete all as specified and directed by Engineer - in -charge. Note:- (a) Work will executed upto 4th floor.(b) The rate is inclusive for scaffolding or reqd necessary arrangement for multi-storey bldg external gunniting. |
| 18 | Material and Labour for complete removal of existing roof treatment (Mud puska, Cement Tiles, bricks or Old APP Roof treatment and vegitation from root) including bedding layer in cement mortar/Mud and disposed from MoD land complete all as specified and directed by Engineer-in-charge. |
| 19 | Material and Labour for PCC 1:2:4 type B1 using 12.5 mm graded aggregate laid as in padding over roof slabs for providing proper slope to the concrete padding, surface finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge. |
| 20 | Cleaning and preparation of the surface to receive TPO membrane water proofing system, any crack shall be treated with cementious repair mortar by proper grooving arrangement plete all as specified and directed by Engr-In-Charge. |
| 21 | Providing and laying / fixing TPO membrane of nonflammable waterproofing of roof which shall be a 1.5mm thick loose laid TPO membrane layers overlapped to achieve a minimum weld of 110mm laying by hot air welding or either hand applied or by means of automatic machines and the rolls either end are overlapped with layers of non-woven geotextilefiber, the separation layer provided to prevent the mechanical abrasion and cushioning between the membrane and the concrete substructure, the termination of TPO membrane shall be done by aluminium strip anchoring complete all as specified and directed by Engr-In-Charge.Note: Work shall be executed by authorised applicator with prior experience of more than 5 years in applying similar system. |
| 22 | Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5 Sqm but n exc 4 Sqm each,incl removing complete and making good after fixing of new chowkat to match existing finish complete all as specified and directed by Engr-In-Charge. |
| 23 | Taking down chowkats or frames with shutters (with out taking off shutters from the frames) not exc 1.5 Sqm each , include removing complete all as specified and directed by Engr-In-Charge. |
| 24 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibbers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners not paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made. |
| 25 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length including making good complete as per direction of Engineer-in-Charge: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made. |
| 26 | Supply and fixing Providing and fixing factory made single extruded WPC (Wood Polymer Composite) moulded decorative type shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 27 | Supply and fixing for Butt hinges of stainless steel 100mm size Heavy type complete all as specified and directed by Engr-In-Charge. |
| 28 | Supply and fixing for 150mm long stainless steel handles, fancy type, fabricated type complete all as specified and directed by Engr-In-Charge. |
| 29 | Supply and fixing for 200 mm stainless steel, barrel tower bolts of extruded section and fixedcomplete all as specified and directed by Engr-In-Charge. |
| 30 | Supply and fixing for Brass Mortice lock, vertical type, size 100mm 4 levers vertical with fancy handle (as decided by EIC) complete all as specified and directed by Engr-In-Charge. |
| 31 | Supply and fixing for 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 32 | Supply and fixing in Door closer hydraulically regulated Aluminium (Die cast) body design No-3 universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg Complete all as specified and directed by Engr-In-Charge. |
| 33 | Supply and fixing of door stopper of aluminium and tongue with hard drawn steel spring, (140mm size), complete all as specified and directed. |
| 34 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar complete all as specified and directed by Engr-In-Charge. |
| 35 | Material and Labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and includung 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr-In-Charge. |
| 36 | Material and Labour for coloured chequered cement concrete tiles 25cm x25cm or 30cmX30cm x22/25 mm thick, set, jointed & pointed in neat cement slurry with grey cement abd pigment over and includung 20 mm screed bed in CM (1:6) , complete all as specified and as directed by the Engineer-in-Charge. |
| 37 | Material and Labour for Machine coloured pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60 mm thickness M-35 Grade.complete, with grey cement and pigment all as specified and directed by Engr-In-Charge. |
| 38 | Material and Labour for 75 mm thick Cement concrete type D-2,(1:4:8) (using 40mm graded aggregate) as in sub floors, sub bases , floors and pavings/ paver blocks etc complete all as specified and directed by Engr-In-Charge. |
| 39 | Material and Labour for Sand cushioning for interlocking paver blocks complete all as specified and directed by Engr-In-Charge. |
| 40 | Demolition of RCC of any description in any position not otherwise specially provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engr-In-Charge. |
| 41 | Material and Labour for providing reinforcement cement concrete 1:2:4 (using 20mm graded stone agg) as in slabs/ beams/column in floors balconies,canopies, desc slabs and the shelves and the like complete all as specified and directed by Engr-In-Charge. |
| 42 | Dismantling plain corrugated steel sheeting any gauage thick ness including Nainital and similar pattern complete all as specifed and directed. |
| 43 | Supply and fixing of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-In-Charge. |
| 44 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in- charge. |
| 45 | Material and Labour for preparation of old decorated steel surfaces any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as per specified and directed. |
| 46 | Material and Labour for preparation of new steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 47 | Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc complete all as specified and directed by Engr-In-Charge. |
| 48 | Demolition of Brickwork or stone/boulders masonry built in cement mortar complete all as specified and as directed by the Engr-in-charge |
| 49 | Material and Labour for Brick work in cement mortar 1:4 using sub class B bricks straight or curved on plan exceeding 6m mean radius complete all as specified and as directed by the Engineer in Charge. |
| 50 | Supply and fixing in repair 110 mm PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to wall all as specified and as directed by Engr-in-Charge |
| 51 | Supply and fixing in repair 110 mm PVC (SWR) bends any radius all as specified and as directed by Engr-in-Charge |
| 52 | Supply and fixing in repair 75 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints, laid in trenches/floors/wall (using GI half round Clamp) complete all as specified and directed by Engr - in- charge. NOTE :- Rate includes core cuttings of RCC slab/cutting holes in wall and all fittings as branch piece/ junction , single/ double/ triple, equal/ unequal complete all as specified and directed by Engr-In-Charge. |
| 53 | Demolition of wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/ slabs/ blankets/board fixed in aluminum door or partition, any thickness, including cover fillets & framed work if necessary complete all as specified and directed by Engr-In-Charge. |
| 54 | Supply and fixing of 18mm thick exterior WPC wall cladding (Jalli) sheet of medium density in colour white or as directed by Engr-in-charge with computerised numerical control (CNC cutting) as directed, fixed on MS frame. The size of each panel not exc 1.5sqm. MS frame to be fixed on walls, chajja and fasad with GI fastener with minm 8 nos. 5\\" long per 1.5 sqm, including all necessary repairing work as reqd, two coat of synthetic enamel paint over one coat of red oxide primer, including weather sealing sealant, masking tape, including cutting of V groves to fixing molded PVC sheet with S/S self-tapping screw complete all as specified and directed by Engineer-in-Charge.Note:-1.Work to be carried out up to five storey bldg with MS scaffolding not bamboo. 2. MS frame should be fixed on wall after painting. |
| 55 | Supply and fixing of false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of Size 595x595 mm, semi perforated 12mm thick micro regular edged of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Non-combustible as per BS 476 (part 4) - 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross - T of size 15x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Make : Diamond. |
| 56 | Supply and fixing of 5mm thick ACP wall cladding sheet in colour as directed by Engr-in-charge fixed on MS frame . The size of each panel not exc 1.5sqm. MS frame to be fixed on walls, chajja and fasad with Min 08 Nos GI fastener 5\\" long per 1.5 sqm, including all necessary repairing work as reqd, two coat of synthetic enamel paint over one coat of red oxide primer, including weather sealing sealent, masking tape, including cutting of V groves to fixing moulded ACP sheet self-tapping screw complete all as specified and directed by Engineer-in-Charge.Note: MS frame should be fixed on wall after painting. |
| 57 | Supply and fixing in repairs Vitreous China Squatting pan, 'Orissa' pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and driected by engineer -in- charge |
| 58 | Supply and fixing in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolt, flushing cistern and flush pipe) complete all as specifed and directed. |
| 59 | Supply and fixing in repair plastic water closet seat, black and white closed pattern with flat bottom and cover and mild steel chromium plated plated or aluminium hinging device complete all as specifed and directed. |
| 60 | Supply and fixing in repair for 10 ltrs capacity PVC valve less syphonic action type flushing cistern low level white inlet ball valve, float , flush pipe and handle including brackets and fixed complete all as specifed and directed. |
| 61 | Supply and fixing in repair for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 62 | Supply and fixing in repair for CP urinal spreader for fixing with 15mm dia pipe complete all as specified and directed. |
| 63 | Supply and fixing in repair CP bib taps long body , cast copper alloy, fancy type with crutch or butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15 mm bore complete all as specified and directed by Engr-In-Charge. |
| 64 | Supply and fixing in repair for brass, CP shower rose complete all as specifed and directed. |
| 65 | Supply and fixing in repair for brass, CP shower arm complete all as specifed and directed. |
| 66 | Supply and fixing in repair for 15mm bore brass chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall complete all as specifed and directed. |
| 67 | Supply and fixing in repair for PVC connection 15mm dia and 600mm long complete all as specifed and directed. |
| 68 | Supply and fixing in repair CP stop/angle valves, cast copper alloy, fancy type, chromium plated with long shank & cup (concealed type) with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed by Engr-In-Charge. |
| 69 | Supply and fixing in repair 15 mm pillar tap, swan neck, cast copper alloy, chromium plated screwed down for high pressure, screwed for 15mm bore iron pipes and fixed , complete all as specified and directed by Engr-In-Charge. |
| 70 | Supply and fixing in repair fancy type mirror of 5 to 6 mm thick glossy glass looking mirror, decorative type, any size and shape bevelled edges all-round, wall mounted complete all as specified and directed by Engineer-in-Charge. |
| 71 | Supply and fixing in repairs vitreous china wash hand basin of size 550 mm x 400 mm white, flat back with and incl angle iron brackets, waste pipe of 32 mm dia of suitable length, pvc connection of 15 mm dia & 450 mm long with PTMT nuts with 32 mm dia brass chromium plated bottle trap and waste coupling complete all as specified and as directed by Engineer-in-Charge. |
| 72 | Supply and fixing in repair 75mm pvc floor trap, with gratting including jointing to waste pipe fixed in cement concretetype B1(1:2:4), complete all as specified and directed by Engr-In-Charge. |
| 73 | Supply and fixing in repair 75mm pvc Nahani trap, with gratting including jointing to waste pipe fixed in cement concrete type B1(1:2:4), complete all as specified and directed by Engr-In-Charge. |
| 74 | Supply and fixing in repair for brass, CP towel rail of 20mm dia with hook, D type, 600mm long between flanges complete all as specifed and directed. |
| 75 | Supply and fixing in repair SS towel ring, round type complete all as specified & directed by Engr-in-charge |
| 76 | Supply and fixing in repair SS soap dish complete all as specified & directed by Engr-in-charge |
| 77 | Supply and fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook ncluding making connections and fixed in position complete in all respect as specified |
| 78 | Supply and fixing in repair SS 15mm dia , CP jet with CP flexible pipe 90cm long incl necessary fittings complete all as specified and directed . |
| 79 | Supply and fixing stainless steel toilet paper holder with Flap recessed type complete all as specified & directed by Engr-in-charge. |
| 80 | Dismantling water tanks capacity exc 500 ltrs and n. exc. 1000 ltrs & removing to store complete all as specified and as directed by the Engineer-in-Charge. |
| 81 | Dismantling water tanks capacity exc 250 ltrs and n. exc. 500 ltrs & removing to store complete all as specified and as directed by the Engineer-in-Charge. |
| 82 | Supply and fixing 1000 ltrs capacity rotational moulded polythelene water storage tanks (cylindrical or vertical with closed top)hoisted and fixed in position all as specified in SSR part I. and as directed by the Engineer-in-Charge. |
| 83 | Supply and fixing 500 ltrs capacity rotational moulded polythelene water storage tanks (cylindrical or vertical with closed top)hoisted and fixed in position all as specified in SSR part I. and as directed by the Engineer-in-Charge. |
| 84 | Supply and fixing 20 mm bore ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe & fixed.(Minimum weight15mm-142gms / 20mm-210gms / 25mm-455gms / 40mm-690gms) complete all as specified and as directed by the Engineer-in-Charge. |
| 85 | Supply and fixing Gun-metal, glabe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed dia of bore of pipe 20mm complete all as specified and directed by Engr-In-Charge. |
| 86 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re- fixing or removal to store complete all as spd and directed by Engr-in-Charge. |
| 87 | Taking up or down 20mm bore steel tubing and connections, including cleaning for re- fixing or removal to store complete all as specified and directed by Engr-in-Charge. |
| 88 | Supply and fixing 15mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall including chesing & ceiling or laid in floors complete all as spd and directed by Engr-in-charge. |
| 89 | Supply and fixing 20mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as specified and directed by Engr-in-charge. |
| 90 | Material and Labour for 16-18mm thick Granite (of any type) work (table rubbed and polished) for cooking platform, bar counter and similar work including cutting polishing rounding on edge etc bedded, jointed with grey cement slurry, pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed. |
| 91 | Material and Labour for 16-18mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall with any height) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, cutting polishing rounding on edge etc machine cut, bedded, jointed with grey cement slurry, pointed with white cement with admixture of pigment to match the shade of granite stone and holding with brass screw complete all as specified and directed. |
| 92 | Demolition of concrete of any description and in any position not otherwise specifically provided for.complete all as specified and directed by Engr-In-Charge. |
| 93 | Material and Labour for 75mm thick PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in plinth protection complete as directed by Engr-in-Charge. |
| 94 | Supply and fixing in repairs for powder coated (minimum thickness of powder coating 50 micron) aluminum anodized three track slinding window with two or more shutter with 5 mm thick plain glass, one shutter with stainless steel mosquito proofing jali with good quality bearing ,handle lock,etc rubber beading and glazing clips etc using following sections as given in 'JINDAL' catlogue etc as specified as per manufacturer instructions with the following size, complete all as specified and directed by Engr-in-Charge.Note : (1)Glass and wire are included and not measured and paid separately however cost of all other connected accessories deemed included in unit rate. (2) faces of windows jamb should be given fair finish before fixing the window as per requirement of site |
| 95 | Supply and fixing in repairs aluminium chequered grill of anodized section mesh100x100mm or 80x80mm of 8/6/mm dia of bar fixed to frame with 20x20mm aluminium flat section with screw complete all as specified and as directed. |
| 96 | Supply and fixing in repair Aluminium door with anodized aluminium frame of section 62.5 x 37 x 2.5 mm thick, shutter with bottom & middle rail of section 112.50 x 37 x 2.5 mm thick and styles & top rail of section 83 x 37 x 2.5 mm thick with centrally locking arrangement with lock make of ‘GODREJ’ or ‘LINK’ 7 lever and self closing device with rebate including jointing cleats, fixing of builders hardware fittings, necessary numbers of floor spring and glazing with 4mm to 5.5 mm thick ordinary plain glass including necessary fittings, fixtures & aluminium snap beads complete all as specified and directed by Engr-In-Charge. |
| 97 | Supply and fixing in repair aluminum window/ventilations with aluminum anodized frame of aluminum section 62.5 x 37 x 2.5 mm thick with shutters having styles & rails of aluminum section 44.45 x 44.45 x 2.5 mm thick including jointing cleats, glazing clips, rubber packing, aluminum snap beading, screws anodized aluminum fittings such as hinges, tower bolts, handles etc including 4mm to 5.5 mm thick ordinary plain glass complete. Including providing and fixing aluminum chequered grill of anodized section of mesh 100x100mm of 08 mm dia of bar fixed to frame with 20x20 mm aluminum flat with mire mesh fixed with screw complete all as specified and as directed. |
| 98 | Supply and fixing in repair for aluminium partition frame work anodized frame of size 62.5x37x2.5 mm thick with bottom 7 middle rails of aliminium section 62.5x37x2.5mm thick and styes, top of section 62.5x37x2.5 mm thick including jointing cleats, filled with 12 mm thick pre laminated partical board interior grade up to middle rail from bottom and 5 to 6 mm thick plain/frosted glass/aluminum chequered grill of anodized section of mesh 100x100mm of 08 mm dia of bar fixed to frame with 20x20 mm aluminum flat with mire mesh fixed with screw and necessary fittings fixtures complete. |
| 99 | Material and Labour in repair for providing and fixing stainless steel (Grade 304) frames, channels, plates angles for fixing toughened glass etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the frame with necessary accessories & stainless steel dash fasteners, stainless steel bolts, Knob and chain etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed by Engr In Charge. |
| 100 | Supply and fixing in repair Fibre glass reinforced translucent plain decorative sheeting having thickness1mm- 3mm textured surface side lap fixed with coach screw and washer in roof, wall, chain link fencing etc complete all as specified and directed by engr-in-charge, |
| 101 | Excavation in trenches in soft/loose soil, n exc 1.5m wide and n. exc 1.5m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n. exc 10 sqm on plan and n. exc 1.5m in depth and getting out complete all as specified and directed by Engr-In-Charge. |
| 102 | M & L for Returning & filling in including spreading, levelling, watering & well ramming in layers n.exc 25mm thick in soft/ hard / dense soil complete all as specified and directed by Engineer-in-charge. |
| 103 | Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified and directed by Engr-in-Charge. |
| 104 | Demolition and breaking up drain pipes 150mm bore set in cement mortar incl demolation of PCC haunching etc, complete all as specified and directed. |
| 105 | Material and Labour for double wall corrugated drain pipe ' DWCPE' (SN8) 180 mm (OD)/ 152 (ID) mm diameter, (ISI marked) laid in trenches and tested including fittings of same grade complete all as specified and directed |
| 106 | Material and Labour for cement concrete 1:3:6 type C2 (using 40mm graded aggregate) as in bed with thickness of bed below the barrel of pipe as 100mm and width of bed as 450mm to drain pipes of 150mm internal dia including packing under, and completely surrounding pipes with concrete after they are laid and tested complete all as specified and as directed by Engr-in-Charge |
| 107 | Cutting into existing Manholes for connecting new drains , 150mm dia, making good to pipes and rendering , cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section ) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as specified and as directed by Engr-in-Charge |
| 108 | Supply and fixing in repair SFRC manhole cover slabs medium duty of any shape and siz required and 65mm thick all as specified and directed by the Engr-in-charge. |
| 109 | Supply and fixing in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of andard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as rected (each line wire to be measured complete all as specified and as directed by the Engineer-in-Charge. |
| 110 | Material and Labour in repair for providing precast cement concrete type B0 (1:2:4) (12.50 mm graded aggregate) set in cement mortar (1:4) louvers and jallies 35.00 mm thick (measured solid), including all moldings , complete all as specified. |
| 111 | Material and Labour for providing reinforced cement concrete Type B0 (1:2:4) (12.5 mm graded stone aggregate) as in copping, shelves roof kerbs or mud stops, rounded or chamfered edges, including necessary formwork complete all as specified. |
| 112 | Supply and fixing in repair of rifle rack for 20 sets of rifle in two layers ,having space to keep 10 sets in each layers with side wooden main pillars of size ( 100mm length x 100mm breadth x 2000mm height) of hardwood of first class having rack size base cradle ( 50mm thickness of rack x 300mm depth x 1900 mm breadth) having grooves to recieve rifle with stable base and a rack with grooves to recieve barrels of rifle to be rested at certain height from base having size ( 50mm thick x 100mm deep x 1900mm breadth) to recieve rifle barrels alomng with proper arrangment fo locking of all the rifle . The racks recieving the rifle shall be properly fixed to pillars with flat iron plates using nut and bolts of MS 100mm long to give strength to racks . Centre to centre spacing for each rifle should be around 130mm-180mm to give comfortable clearance. The locking bar should be of steel iron bar with locking hooks. The rack should be anchor floor mounted with heavy lag screws into structural timber to make it anti flip or flip free and applying staining and varnishing the complete wooden surface and aaplying varnish complete all as specified and directed by engineer in charge. |
| 113 | Supply and fixing in repair of rifle rack for 5 sets of rifle ,having space to keep 5 rifle with side wooden main pillars of size ( 100mm length x 100mm breadth x 1000mm height) of hardwood of first class having rack size base cradle ( 50mm thickness of rack x 300mm depth x 900 mm breadth) having grooves to recieve rifle with stable base and a rack with grooves to recieve barrels of rifle to be rested at certain height from base having size ( 40mm thick x 100mm deep x 900mm breadth) to recieve rifle barrels alomng with proper arrangment fo locking of all the rifle . The racks recieving the rifle shall be properly fixed to pillars with flat iron plates using nut and bolts of MS to give strength to racks . Centre to centre spacing for each rifle should be around 130mm-180mm to give comfortable clearance. The locking bar should be of steel iron bar with locking hooks. The rack should be anchor floor mounted with heavy lag screws into structural timber to make it anti flip or flip free and applying staining and varnishing the complete wooden surface and applying varnish complete all as specified and directed by engineer in charge. |
| 114 | Supply and fixing in repair of rifle rack gun cabinet of overall size 55 inch , overall depth 15 inch, overall width -27 inch, overall weight -60kg, door movement about 90- 135 degree, with lock bar facility, rifle locking system should have provision of iron chan with pad lock for double protection of rifle, cabinet should have separate locker and only single main door, hole at bottom for fixing safe and grouting, all locks of rifle cabinet should not be opened by any other key for safety of arms and ammunition and security reason all as specified and directed by engineer in charge. |
| 115 | Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge. |
| 116 | Material and Labour for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty, PVC concealed conduit after cutting,chasing the wall etc and making good of disturbed surface, including all accessories etc, heavy duty ISI marked, including mild steel sunken boxes with earth dolly duly powder coated suitable for modular plates of required size, covered with modular plates, suitable for modular switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLS) single core cable as earth continuity conductor to common earth and connecting to earth dolly. ( Note- Modular Switch and sockets will be measured and paid seperately). (a) For one light/fan point controlled by one SP switch |
| 117 | (b) For one bell point controlled by one No bell push complete all as specified and directed by Engr-In-Charge. |
| 118 | All as per item No-116.00 above but for one 3 pin socket out let, 6 Amps on same board complete all as specified and directed by Engr-In-Charge. |
| 119 | All as per item No-116.00 above but for one 3 pin socket out let, 6 Amps on Independent board complete all as specified and directed by Engr-In-Charge. |
| 120 | All as per item No 116.00 above but with 2.5 Sq mm cable for Independent bd one 3 pin 15 Amps socket outlet including S/C 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire required size all as specified and directed by Engineer-in-Charge. |
| 121 | Supply and fixing Modular switch 1 way 6A, 1 modules suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge. |
| 122 | Supply and fixing Modular Socket, 6A - 2/3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge. |
| 123 | Supply and fixing Modular switch 1 way 16A, 1 modules suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge. |
| 124 | Supply and fixing Modular Socket, 16A - 2/3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge. |
| 125 | Supply and fixing electronic modular Fan Regulator rotary flush step type 120 watt, 240 volt complete all as specified and directed by Engr-In-Charge. |
| 126 | Supply and fixing Modular bell push flush type 5 Amps suitable for 240 volt complete all as specified and directed by Engr-In-Charge. |
| 127 | Supply and fixing ding dong bell AC 230 volt single pole complete all as specified and directed |
| 128 | Supply and fixing of ceiling roses, surface bakelite 65x50mm 2 or 3 terminals , PVC/Polycarbonate, isolated body fixed on PVC round block complete all as specified and directed by Engineer-In- Charge. |
| 129 | Taking down old unsv MCCB/MCB DB of any size complete all as specified and directed by Engr-In-Charge. |
| 130 | Supply and fixing MCB distribution board with Bus bar 200A neutral link ,earth bar made out of CRCA mild steel sheet surface mounting SPN 8 way 230 volts double door type complete all as specified and as directed by Engineer-in-Charge. Note :- MCB shall be measured and paid seperately. |
| 131 | Supply and fixing load line vertical distribution board made out of CRCA sheet,double door, surface mounting TPN 4 way 415 volts 200 Amps rated bus bar and stove enamels dust and vermin proof suitable for TP/FP upto incomer MCCB of 160 Amps complete all as specified and as directed by Engineer-in-Charge. Note :- MCB and MCCB shall be measured and paid seperately. |
| 132 | Taking down unserviceable MCBs of any capacities from the MCCB DBs /MCB DBs after disconnecting the electric supply , complete all as specified and directed by Engr-In-Charge. |
| 133 | Supply and fixing in replacement of 3 pole MCCB 125 Amps, 50 HZ, 415 volts,Ics=100%Icu with rupturing capacity 16 KA complete all as specified and directed by Engineer-in-charge. |
| 134 | Supply and fixing MCB SP 6 to 32 Amps 10 KA, 240 volt 'C' Series all as specified and directed by engineer-in-charge. |
| 135 | Supply and fixing MCB SPN 32 Amps 10 KA, 240 volt 50 HZ 'C' Series all as specified and directed by engineer-in-charge. |
| 136 | Supply and fixing MCB TPN 40 to 100 Amps 10 KA, 240 volt 50 HZ 'C' Series all as specified and directed by engineer-in-charge. |
| 137 | Taking down of light fittings of any wattage and any type complete all as specified and directed. |
| 138 | Supply and fixing of wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting with 2200 Lumen 4000K , 230 Volts, diffused optics complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge. |
| 139 | Supply and fixing of bulkhead 15 watt 220 volts AC surface mounted type including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge. |
| 140 | Taking down unserviceable submain wiring of alluminium of any run any size cable including batten/conduit complete etc and making good disturbed surfaces complete all as specified and complete all as specified and directed by Engr-in-Charge. |
| 141 | Material and Labour for submain wiring with three run of 4.0 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked through suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all acessories and fittings all concealed in wall and surface conduit on ceiling, complete all as specified :- ( Note : 3 runs of cable and conduit will measured one unit for payment purpose) |
| 142 | Taking down including disconnecting the electric connection of ceiling fan and dismantling blades, greasing and complete all as specified and directed by Engr-in-Charge. |
| 143 | Hanging / fixing only ceiling fan received from item No 142 above and connecting up including fastner and provision of suitable size of copper cable from connector of fans to ceiling rose carry out painting complete all as specified and directed by Engr-in-Charge. |
| 144 | Taking down including disconnecting the electric connection of exhaust fan and dismantling blades, greasing complete all as specified and directed by Engr-in-Charge. |
| 145 | Fixing only Exhaust fan received from item No 144.00 above and connecting up including fastner with suitable size of copper cable from connector of fans to ceiling rose complete all as specified and directed by Engr-in-Charge. |
| 146 | Dismantling including disconnecting the electric connection for split AC 1.5/ 2.0 TR indoor and outdoor unit and deposited in the store of AGE E/M complete all as specified. |
| 147 | Servicing,Installation,connecting of Split AC 1.5/2.0 TR received from item no 31 including gas charging if required and testing upto satisfaction of Engineer in charge Complete all as specified. Note: Gas charging and minor parts replacement required at site to made AC functional also included in the unit quote rate of item. |
| 148 | Supply and fixing in replacement refrigerant line copper tube1/2\\" bore incl insulation of AC pipe complete all as specified and directed. |
| 149 | Supply and fixing in replacement refrigerant line copper tube 1/4\\" bore incl insulation of AC pipe complete all as specified and directed. |
| 150 | Supply and fixing in replacement of PVC pipe of size 20 mm dia fixing on wall by using clamps and screwing including necessary tee, collar ,bend,socket etc complete all as specified and directed. |
| 151 | Material and Labour for taking down existing geyser carefully of any capacity without damaging and to be kept in safe custody and re-fixing the same after completion of painting work, complete all as specified and as directed by Engr in charge. |
| 152 | Supply installation commissioning testing of tripod earthing complete with copper bonded earthing electrode chemical earthing system outer electrode dia 25mm & 3 mtr long tightly filled with crystalline conductor mixture ,250 mm micron copper coated along with bag of back bill compound 50 kg buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) connected to and including galvanized iron strip 4 mm dia as earth lead by means of GI bolts, nuts, check nuts and washers and connecting to earthing test point, including CI cover, frame and PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in earthing pit with CI cover and framing including necessary earth work etc, complete all as specified. Note :- PCC chamber shall be constructed at least one meter away from building shall be provided in slanting manner. Note :- PCC pit cover shall be precast of RCC 1:2:4 type B-I 80 mm thick reinforced with XPM weighting not less than 4 Kg (sqm in liew of CI) |
| 153 | Material and Labour in replacement of earth contuinity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanized iron or steel wire complete all as specified and directed by Engineer-in-Charge. |
| 154 | Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with remote control complete all as specified and directed by Engineer-in-Charge. |
| 155 | Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed by Engineer-in-Charge. |
| 156 | Supply and fixing wall mounted fans , 230 V, 400 mm sweep complete all as specified and directed by Engr-In-Charge. |
| 157 | Supply and fixing White cover plate with frame,1 module Complete all as specified and directed by Engineer-in-Charge. |
| 158 | Supply and fixing White cover plate with frame,2 module Complete all as specified and directed by Engineer-in-Charge. |
| 159 | Supply and fixing Modular Metal flush box 1 module Complete all as specified and directed by Engineer-in-Charge. |
| 160 | Supply and fixing Modular Metal flush box 2 module Complete all as specified and directed by Engineer-in-Charge. |
| 161 | Supply and fixing Modular Socket, 32A - 3/5 pin 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge. |
| 162 | Supply and fixing Modular MCB SP 25 Amps 10 KA, 240 volt 1 module all as specified and directed by Engineer-in-charge. |
| 163 | Removal of excavated surplus soil to a distance not exc. 50 Mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed by Engr-in-charge |
| 164 | Material and Labour for sand cushioning to under ground cable provided with layer of sand (8cm deep before laying the cable and 15 cm deep after laying the cable ie total 23 cm complete all as specified and as directed by Engr-in-charge |
| 165 | Supplying and laying un-reinforced precast concrete cable cover Class LV, Type I, flat, size 250mm x 150mm x 40mm laid in in trenches as protection to cable all as specified and directed by Engineer-in-charge |
| 166 | Taking out old unserviceable LT under ground cable any type from trenches,pipes & poles complete all as specified and directed. |
| 167 | Supply and laying of XLPE LT 1100 Volt Grade, armourd under ground cable size of 16 Sqmm 4 core with stranded aluminium conductor in trenches /passing through pipes/ on poles etc complele all as specified and directed. |
| 168 | Supply and fixing in repair of LED security light fitting 35 watt high pressure dia cast aluminium housing and secondary optical lens for superior light distribution , heat resistant thoughened glass with frame, IP66 protection complete with lamp & connected item and connection with suitable cable from ceiling rose to light fitting and fixing on GI bracket made out of suaitable GI Pipe medium garde 1.2 mtr long bent to shape and fixed on wall with flat iron clamps, nuts bolts washer etc all as specified and directed |
| 169 | Supply and fixing in repair ultra modern design architectural design 36 watt 2x2 recess LED, 6000 K luminaire having glare free symmetrical illumination Complete all as specified and directed by Engineer-in-Charge. |
| 170 | Supply and installing desert cooler electic driven (single phase) having nominal air flow capacity of 4000 cum/hour 230 volt , cooper winding motor (04 speed) and made of 20 gauge MS sheet and size not less than 90cm, 78 x 78cm surface area from top and bottom, 62 x 54cm front grill size including tullu pump with Rotary Switch ( 4 Speed) 5 Amp switch on front side, Drain Valve, float valve including one coat primer and two coat of enamel paint outside and inside, Grass pad with mosquitoes net complete all as specified. |
| 171 | S&F mild steel work in framed work such as frame, straps, Ties Clamps, angle iron frame suitable for desert cooler stand including necessary fixing arrangments nut &bolts fastnuts etc and similar work confirming to Fe-290 Gde E-165 and incl painting to surfaces using two coats of metallic primer and a coat of red oxide paint of desired colour complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 33 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender