Tender For Repair To Tiling, Flooring, Roofing, Plumbing, Joinery, Leakage Seepage And Other Misc Work To Md And Otm Accn At Dhar Ur Under Ge(I) Cg Porbandar.
Tender Value
15 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
20 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Porbandar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Tiling, Flooring, Roofing, Plumbing, Joinery, Leakage Seepage And Other Misc Work To Md And Otm Accn At Dhar Ur Under Ge(I) Cg Porbandar.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' |
| 2 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and as directed. |
| 3 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc complete all as specified and as directed. |
| 4 | Material & Labour for 10 mm thick vitrified tile of area exceeding n.exc 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick CM (1:6) complete all as specified and as directed. |
| 5 | Material & Labour for 10 mm thick vitrified tile of area exceeding n.exc 0.36 sqm in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match over cement mortar 15 mm thick CM 1:4, complete all as specified and as directed. |
| 6 | Material & Labour for non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile n exc 0.11 sqm in floors, over and including 15mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match, complete all as specified and as directed |
| 7 | Material & Labour for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 15mm cement plaster in cement mortar (1:4) complete all as specified and as directed. |
| 8 | Material & Labour for granite (of any type) 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including, grinding, polishing, moulding the edges and polishing and including over screed bed 20 mm thick in cement mortar 1:6, complete all as specified and as directed. |
| 9 | Supply & Fixing in repair PVC Floor trap 75mm bore with grating incl jointing using solvent cement to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed |
| 10 | Supply & Fixing in repair 110mm dia PVC rain water pipe of pressure single socketed with rubber joint, jointed with solvent joint fixed to wall complete all as specified & directed. |
| 11 | Supply & Fixing in repair 110mm dia PVC band any radius as specified and as directed. |
| 12 | Supply & Fixing in repair PVC (SWR) pipe 110 MM bore single socketed in any length with rubber ring joints laid in trenches complete all as specified & directed. |
| 13 | Supply & Fixing in repair PVC (SWR) pipe 75 MM bore single socketed in any length with rubber ring joints laid in trenches complete all as specified & directed. |
| 14 | Supply & Fixing PVC (SWR) bends 110 mm bore with/without access door any radius complete all as specified & directed. |
| 15 | Supply & Fixing PVC (SWR) bends 75mm bore with/without access door any radius complete all as specified & directed. |
| 16 | Supply & Fixing PVC (SWR) single junction 'T' 75 mm bore with access door any radius complete all as specified & directed. |
| 17 | Supply & Fixing PVC (SWR) single junction 'T' 110 mm bore with access door any radius complete all as specified & directed. |
| 18 | Taking up or down 15/16 mm bore dia, steel tubing & connections incl cleaning for refixing or removal to store complete all as directed. |
| 19 | Taking up or down 20 mm bore dia, steel tubing & connections incl cleaning for refixing or removal to store complete all as directed. |
| 20 | Supplying and laying for 16 mm dia CPVC pipes SDR 11 & fittings on walls/ceilings or laying in floors complete all as specified and as directed. |
| 21 | Supplying and laying for 20 mm dia CPVC pipes SDR 11 & fittings on walls/ceilings or laying in floors complete all as specified and as directed. |
| 22 | Supply & Fixing Brass Elbow for special fitting of 16 mm bore CPVC pipe complete all as specified and as directed. |
| 23 | Supply & Fixing Brass Tee for special fitting of 16 mm bore CPVC pipe complete all as specified and as directed. |
| 24 | Supply & Fixing Male Brass threaded Adaptor Tee for special fitting of 16 mm bore CPVC pipe complete all as specified and directed. |
| 25 | Supply & Fixing in repair 15 mm bib tap (fancy type), cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 26 | Supply & Fixing in repairs brass CP shower rose 125mm size fancy type with swivel joint any size incl fixing to steel pipe/union for 15mm dia complete all as specified and directed. |
| 27 | Supply & Fixing in repair Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20mm complete all as specified and directed. |
| 28 | Supply & Fixing in repair Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 25mm complete all as specified and directed. |
| 29 | Supply & Fixing in repair Pillar taps,15mm dia fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. |
| 30 | Supply & Fixing in repair PVC connection of 15mm dia length 600mm complete all as specified & directed. |
| 31 | Supply and fixing in repair Wall Mixer 2 in 1 with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges, complete all as specified and as directed. |
| 32 | Supply & Fixing in repair Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap with and including plastic water closet seat cover, connection to trap, flushing pipe & anti -syphonage pipe etc including necessary materials for fittings & making good to floor etc complete all as specified and directed. |
| 33 | Supply & Fixing in repairs for 10 Ltrs. Capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets slimline or equivalent make / model with all accessories complete all as specified and as directed. |
| 34 | Supply & Fixing in repair for Vitreous China ware wash hand basin white, oval type, size 550x400 mm size with cutting for and pinning ends of brackets or erecting stand including , chromium plated 15mm pillar cock, PVC connection 450 mm long, CP waste coupling, 32 mm dia PVC pipe, complete all as specified and as directed. |
| 35 | Supply & Fixing in repair for 20mm Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified. |
| 36 | Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed. |
| 37 | Supply & Fixing in repair in 15 mm bore stop valves/ Angle valve, cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 38 | Supply & Fixing in repair for 15 mm dia CP two way angle valve fixed in pipe complete all as specified and as directed. |
| 39 | Supply & Fixing in repair 20 mm dia Stop valves / gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 40 | Supply & Fixing in repair Stop valves/Angle valves of size 15mm dia fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 41 | Supply & Fixing in repair Sinks with drainage board made of stainless steel 1mm thick kitchen or laboutery with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm 330 mm x 160mm etc as specified and as directed. |
| 42 | Supply & Fixing in repair harrison rails stainless steel (Curtain rod/drapery rod), 20mm dia, fancy type bracket 2 Nos of each opening and side stopper fancy type required shape and size 2 Nos of each opening, complete all as specified and as directed. |
| 43 | Supply & Fixing in repair Plate racks made out of 1mm thick .Stainless steel, of size 750x600x 250 mm all as specified and directed (make of plate ot be used shall be SAIL, IINDAL, SURAJ or equivalent as approved by GE). |
| 44 | Supply & Fixing in repairs Plastic water closet seat, White/black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device, complete all as specified and as directed. |
| 45 | Dismantling water tanks of capacity of 500 to 1000 liters removing to store, complete all as specified and as directed. |
| 46 | Supply & Fixing for 750 Ltrs Capacity HDPE rotational moulded polyethylene water storage tanks, minimum triple layers (cylinder vertical with class top) hoisted and fixed in position all as specified and as directed. |
| 47 | Supply & Fixing for 1000 Ltrs. Capacity HDPE rotational moulded polyethylene water storage tanks, minimum triple layers (cylinder vertical with class top) hoisted and fixed in position all as specified and as directed. |
| 48 | Material & Labour for treatment of sunken floor slab comprising of the following specifications with and including demolition of sunken floors complete all as specified and directed:- (i) Cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. Provision of 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding concrete to achieve proper slope including cutting holes in bricks or RCC wall for spout.(ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with and including integral water proofing compound Sika Plastocreat plus or equivalent make in Fosroc / Thremax as approved by GE @ 0.2% by wt of cement consumed including filling it with water to check dampness and seepage and where dampness / seepage is noticed, nozzles shall be fixed and grouting carried out. (iii) All junctions points of side wall where CI/GI/PVC pipes are passing through shall be sealed with epoxy putty Sikaguard 694 F(I) or equivalent make in Fosroc / Thremax as approved by GE.(iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean.(v) Applying two coats of polymer modified cementious water proof coating with Sika Topseal 107 or or equivalent make in Fosroc / Thremax as approved by GE in two coats @ 3kg/sqm to sanwiched with glass fibre reinforcemnt: Sika Fab-1 or or equivalent make in Fosroc / Thremax as approved by GE over base coat as per mnaufacturer's instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion.(vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound SIKA plastocreat plus or equivalent make in Fosroc / Thremax as approved by GE @ 0.2% by wt of cement consumed as per manufacturer's specification including rounding of corners and injuctions sloping towards spout. (vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint . (viii) The sunken floor shall be filled with lean concrete 1:7:12. (Note :- Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. Test record for each sunken slab shall be maintained. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing and all M&L is inclued in the rates quoted above.) |
| 49 | Material & Labour for preparing of Old/New surfaces of walls washing the surface throughtly , filling the cracks ,Craves with crack filling compound as suggested by the manufacture and two coat of Rain coat over a coat of primer manufactures by Dr. Fixit of piddilite industries Ltd or equivvalent .(shade to match the existing Paint) , including necessary scaffolding for work, complete all as specified and as directed. |
| 50 | Taking down chowkhat with shutters (without taking of shutters from the frames) of any description n.exc 1.5 sqm in each panel complete all as specified |
| 51 | Taking down chowkhat with shutters (without taking of shutters from the frames) of any description exc 1.5 sqm but nexc 4 sqm in each panel complete all as specified and as directed. |
| 52 | Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and as directed. |
| 53 | Taking down eaves gutter or RWP of any description including fittings complete all as specified & directed. |
| 54 | Taking down cement plaster on stone wall incl racking out joints, hackin for key scrubbing with water etc, complete all as specified and as directed. |
| 55 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete, aluminium or brick surrounds, glazed with putty or fixed with beads as specified and as directed. |
| 56 | Supply and Fixing for 2nd class HW plain chowkhats and framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. |
| 57 | Supply and Fixing for Second class hard wood plain, framed, panelled shutters 35mm thick, (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial faces venners supplied and fixed to chowkhats as directed. |
| 58 | Supply and Fixing for 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. as specified in SSR Part I, Section 8, clause 8.20 (a) all as specified and as directed. |
| 59 | Supply and Fixing for 35 mm thick Flush Shutter, solid core construction, with block board core and plywood face panels, both face is covered with decorative face veneer with lipping/ frame to match commercial type on both side complete all as specified and as directed. |
| 60 | Supply and Fixing for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing as specified and as directed. |
| 61 | Supply and Fixing for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 62 | Preparation of new or previously treated wood surfaces of any description, over 10 cm width or girth, not otherwise described applying one coat of pink primer and applying two coat of synthetic enamel paint complete all as specified and as directed. |
| 63 | Supply and Fixing mild steel, 300mm, Brass ordinary rat tail rod pattern springs including roller and roller plate complete fixed as directed by engineer in charge. |
| 64 | Supply and Fixing for 125 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22 as specified and as directed. |
| 65 | Supply and Fixing for 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised as specified and as directed. |
| 66 | Supply and Fixing for 150 mm long Aluminium, anodised, barrel tower bolts of extruded section as specified and as directed |
| 67 | Supply and Fixing for 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 68 | Supply and Fixing prelaminated partial board 18/19mm medium density ,pre-laminated with Both side with one decorative choice lamination and other side balancing with white lamination fixed with screws as in shelves to kitchen almirah and cub board fixed in repair.(including wooden bedding 18-20mm wide with Complete fittings) complete all as specified and as directed. |
| 69 | Supply and Fixing Hasp and staple for 100 mm, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 70 | Supply and Fixing 140mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed. |
| 71 | Supply and Fixing for 4 mm thick Figured glass, pin headed type and glazing with/ without oil putty in squares not exceeding 0.5 Sq. M in each pane in metal or aluminium window as specified and as directed. |
| 72 | Supply and Fixing for staineless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium/pvc sections complete all as specified |
| 73 | Material & Labour for preparartion of old surface of wall and applying one coats of oil bound distemper including filling undulation with wall care putty as per manufacture instruction with smooth roller finish ,complete all as specified and as directed. (Note:- After painting ,cleaning of all floors, glass & furniture by own arrangement). |
| 74 | Material & Labour for complete removal of existing treatment by washing down and smoothing old surface of walls including scrapping and applying two coats of oil bound distemper over a coat of primer over layer of smooth Putty finish two coats as per manufacture instruction with smooth roller finish, complete all as specified and as directed.(Note:- After painting ,cleaning of all floors, glass & furniture by own arrangement). |
| 75 | Material & Labour for preparing surfaces plastered or unplastered old surface of ceiling applying one coat of oil bound distemper as per manufacture instruction with smooth roller finish, complete all as specified and directed by Engineer in charge. (Note after painting, cleaning of all floors, glass & furniture by own arrangement). |
| 76 | Material & Labour for preparation of old decorated surfaces of walls by scrapping old paint with steel wire brush, wash the surface throughly and applying one coats of acrylic emulsion exterior grade after filling all indulation/ crack with wall care putty including necessary steel scaffolding + green cloth all round the work side for any position/height, complete all as specified and as directed.(For bldg upto GF to four Floor). (Note :- Necessary safety precautions need to be taken by contractor before applying paint.) |
| 77 | Material & Labour for preparation of old painted wood or wood based surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint etc., complete all as specified and directed by Engineer-in-charge. |
| 78 | Material & Labour for complete removal of old painted wood or wood based surfaces of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint etc over a coat of pink primer complete all as specified and as directed |
| 79 | Material & Labour for Preparation of old painted steel based surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint etc, complete all as specified and as directed. |
| 80 | Material & Labour for complete removal of old painted steel based surfaces of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of Red oxide primer etc, complete all as specified and as directed. |
| 81 | Material & Labour for rendering 5mm thick on ceiling concrete surfaces in cement mortar 1:3 and even and smooth without using extra cement.complete all as specified and as directed. |
| 82 | Material & Labour for preparing surfaces plastered or unplastered new surface of ceiling applying two coats of oil bound distemper over a coat of primer two coats as per manufacture instruction with smooth roller finish, complete all as specified and as directed.(Note:- after painting ,cleaning of all floors, glass & furniture by own arrangement). |
| 83 | Material & Labour for 15mm thick plastering in cement & sand mortar 1:4 on fair faces of stone work , finished even and smooth (w/o using extra cement), including all necessary scaffolding etc, complete all as specified and directed. |
| 84 | Material & Labour for preparation of new plastered surfaces of wall and applying two coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/ltrs and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as per the manufacturer’s instructions, complete all as specified and as directed. |
| 85 | Material & Labour for 15mm thick rendering in CM 1:6 to stone surfaces trowelled to even & smooth w/o using extra cement, complete all as specified and directed. |
| 86 | Material & Labour for preparing surfaces plastered or unplastered new surface of walls applying two coats of oil bound distemper over a coat of primer over layer of smooth Putty finish as per manufacture instruction with smooth roller finish, complete all as specified and as directed. (Note:- after painting, cleaning of all floors, glass & furniture by own arrangement). |
| 87 | Supply only water proofing compound, complete all as specified and as directed. |
| 88 | Supply & Fixing in repair for powder coated Aluminium Anodised frame (minimum thickness of powder coating 50 micron) for door, sliding windows & ventilators with one or more rebates including joining cleats for fixing etc, complete all as specified and as directed. |
| 89 | Supply & Fixing in repair for powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and directed. |
| 90 | Supply & Fixing in repair for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and as direction of Engineer in-charge. |
| 91 | Taking down for repair 10 mm/12 mm thick toughned glass as in hinged doors, partitions automatic doors, railing and similar work including cutting to shape, drilling holes required with all stainless steel fitting including L connector, silicon fixer etc including dismantling of old broken toughned glass from doors, railing etc including all fittings complete all as specified and as directed. |
| 92 | Supply & Fixing in repair Stain steel modular kitchen accessories like tray, bucket, channel etc of grade 304, etc complete all as specified and as directed. |
| 93 | Supply & Fixing in repair Stainless steel pipe of grade 304, of any dia for railling / balusters over existing parapet including base, collars, caps, head caps and any other specials etc including necessary welding, polishing and drilling in masonary and filling with epoxy grout etc., including taking out old SS railing and removing to store, complete all as specified and directed. |
| 94 | S&F in repair Plastic cover lid only for PVC water storage tank of capacity exc 500 Ltrs but n exc 750 Ltrs (sample as approved by GE) complete with locking arrangement with or without hinges complete all as specified and as directed. |
| 95 | S&F in repair Plastic cover lid only for PVC water storage tank of capacity exc 500 Ltrs but n exc 2000 Ltrs (sample as approved by GE) complete with locking arrangement with or without hinges complete all as specified and as directed. |
| 96 | S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) as specified and as directed. |
| 97 | Dismantling / Demolition of brick work or stone masonry in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed. |
| 98 | Material & Labour Porbandar stone masonry, well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and as directed. |
| 99 | Material & Labour for 20 to 25mm thick machine cut Kota stone ( single piece of required size for steps) flooring over cement screed base laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and Mirror polishing complete all as specified over and including 15mm thick screed bed in CM 1:4 complete (Note:- Kota stone in S /case should be provided in single piece upto 1.5 m length or as per site requirements complete all as specified and as directed.) |
| 100 | ditto - all as above item No 98 but kota stone slab (100/150mm x 550mm) and 20-25mm thick in riser of steps, skirting , dados and pillar laid over and including 10mm thick rendering to receive the stone in cement mortar 1:3 and jointed complete all as specified and as directed. (Note:- Kota stone in S /case should be provided in single piece upto 1.5 m length) |
| 101 | Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc, for exceeding 500 ltrs and not exceeding 1000 ltrs, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender