Tender For Addn/Alteration To Flag Mast Near Prade Ground, Addn/Alteration To Boundary Wall Alongwith Jaffri In Backside Of Administrative Building And Provision Of Fountain And Allied Civil Work Near Bldg No P-62 At Icgs Okha Under Ge (I) Cg Porband
Tender Value
19 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
14 days left
EMD
38000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Alteration To Flag Mast Near Prade Ground, Addn/Alteration To Boundary Wall Alongwith Jaffri In Backside Of Administrative Building And Provision Of Fountain And Allied Civil Work Near Bldg No P-62 At Icgs Okha Under Ge (I) Cg Porbandar
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' |
| 2 | Demolition of wall brickwork/ block masonry/ stone or boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles including removing outside of MOD etc complete all as specified and as directed. |
| 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directed. |
| 4 | Surface dressing n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and as directed. |
| 5 | Removing excavated material to a distance exc 1.5 km but not exc 5 km and depositing where directed at a level n exc 1.5m above the starting point, complete all as specified and as directed. |
| 6 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm soft/loose soil, complete all as specified and as directed. |
| 7 | Material and labour for cement concrete (1:4:8) type D2 using 40mm graded aggregate as in foundation, filling and mass concrete etc all as specified and as directed. |
| 8 | Material and labour for Pre-cast cement concrete block masonry with solid blocks, type C1 (1:3:6) using 20mm graded aggregate exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed. |
| 9 | Material and labour for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed |
| 10 | Material and labour for 20mm thick Granite (of any type) in flooring (table rubbed and polished) and including 20 mm thick Screed Bed in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture pigments to match the shade of granite, complete all as specified and directed. |
| 11 | Material and labour for providing hardcore of broken stone or boulders guage not exc 63mm deposited spread and levelled in layers each layer not exc 15 cm thick including ramming and watering to a true surface complete all as specified and directed. |
| 12 | Material and labour for 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base,etc, complete all as specified and directed. |
| 13 | Material and labour for sand filling under floors including watering & consolidation complete all as specified and as directed. |
| 14 | Material and labour for Providing & laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour & design & pattern as in footpath,parks lawan,driveways or light traffic parking etc of required strength ,thickness & shape and size made by table vibratory method using PU mould,laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand compacting and proper embedding /laying of interlocking paver blocks into sand bedding layer through vibratory compaction by using plate vibrator filling the joints with sand and cutting of paver blocks as per required size and pattern & finishing and sweeping extra sand complete all as specified and as directed. |
| 15 | M&L for Providing & laying at or near ground level factory kerb stone of M-25 grade cement concrete in position to required line,level and curvature,jointed with cement mortar 1:3 including making joints with or without grooves (thickness of joints except at sharp cuve shall not to be more than 5 mm), including making drainaige openeing whereever required complete all as specified and as directed. |
| 16 | Material and labour for 75 mm thick cement concrete type B-0 (12.5 mm graded aggregate) as in flooring finishing cement concrete even and smooth without using extra cement all as specified and as directed. |
| 17 | Material and labour for providing and fixing stainless steel (grade 304) railing made of hollow tubes,channels plates etc including welding buffing,polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts,bolts and hinges etc any other fitting fixture as required,complete all as specified and directed. |
| 18 | Demolition of cement concrete un reinforeced of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 19 | Material and labour for providing precast cement type B0 1:2:4 (12.5 mm graded aggregate) and set in cement mortar of 1:4 as in louvers and jallies of 25 mm thick (measured solid) including all mouldings but excluding frame (precast frame shall be measured and paid separetly) |
| 20 | M&L for providing precast cement type B1 1:2:4 (20 mm graded aggregate) and set in cement mortar of 1:4 as in posts/bed block/boundary pillar for louvers and jallies complete all as specified and as direcetd. |
| 21 | Material and labour for red bajri fillig in floors or paving laid in layersn exc 15 cm thick spread levelled and rammed including watering complete all as specified and as directed |
| 22 | Material and labour for preparation of newly plastered or un plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed. |
| 23 | Supply and fixing for Narrow Beam LED Spotlight-Outdoor Adjustable IP67 Waterproof wall wash light for Building facades,garden flood light with long throw, landscape lighting projection(cold white 6000k, 5W(AC85-265V), complete all as specified and directed. |
| 24 | Supply and fixing and testing PVC insulated PVC sheathed cable electric control cables (heavy duty) with stranded copper conductor of size 1.5 Sqmm,3 core 1100 volts grade complete all as specified and directed. |
| 25 | Supply and fixing Rigid non metalic PVC conduit exclusive of boxes (Junction / terminal) but inclusive of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles pipe hooks etc, complete all as specified and directed. |
| 26 | Supply and fixing MCB (DB) SPN 4 Way double door 415V made of sheet metal enclosure for MCBs as incoming and SPN/SP MCB as outgoing as specified |
| 27 | Supply and fixing MCB SPN pole 240 Volts C curve 10 KA ISI marked as per IS/IEC 60898-1 2002 of 40/63 Amps capacity IP20 complete all as specified and directed |
| 28 | Supply and fixing for MCB SP 240 Volts C Curve 10KA ISI marked as per IS/IEC 60898-1 2002 of 6/32 AMPs capacity IP20 complete all as specified and directed |
| 29 | Supply and fixing and testing & commisioning of nozzle made with gunmetal ISI-marked (IS 318 grade) geyser jet 100mm with adjustable nozzle for height adjustment (Built-in internal mechanical sleeve or 15° ball swivel joint for fine-tuning display height and angle) of the fountain, required pressure Jet minimum capable of launching a frothy column 25 to 30 feet high, etc complete as required and as directed. |
| 30 | Supply and fixing for thermoplastic cable junction box including bus bar/terminal for cable connection with IP-66 protection complete all as specified and as directed. Make Hensel Cat No DK 2525 G or Its equivalent specified make in legrand /sintex |
| 31 | Supply and fixing and testing and commissioning of underwater luminaries surface mounted RGB LED spot light 6 x 3W with IP68 protection,SS/aluminium dia casting body with power coated paint,soft rubber gasket along with 2 years free replacement guaranty etc complete as required and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender