Tender For Special Repair To Fafa Block No 06 At Farm Area Under Ge Wellington
Tender Value
77.96 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
14 days left
EMD
1.41 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Fafa Block No 06 At Farm Area Under Ge Wellington
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE WELLINGTON NAME OF WORK: SPECIAL REPAIR TO FAFA BLOCK NO 06 AT FARM AREA UNDER GE WELLINGTON Contract No: CWE/ WEL/ OF 2025-26 Bidder Name : SCHEDULE 'A' (BOQ)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Item of Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency Rate in Figures to be entered by the Bidder including all Taxes etc.Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e. DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit, if any respect of Supplies Under full Excise Duty Category Total amount TOTAL AMOUNT With Taxes Total amount in words |
| 2 | Complete removal existing detoriated APP water proofing membrane of any thickness over roof slab/parapers etc and removing rubbish upto ouside MD land complete all as specified and directed. |
| 3 | Demolition of un-reinforced cement Concrete of any description and in any position not otherwise specifically provided including roof padding etc and removing rubbish upto ouside MD land complete all as specified and directed. |
| 4 | M & L for 50 mm thick (average thickness), plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in levelling/padding course on roof slab, projections, on similar surfaces with existing slope, making the surface even and fair without using extra cement complete all as specified and directed. |
| 5 | M & L for rendering 10 mm thick on fair faces of brick masonry or concrete surfaces in cement mortar 1:3 laid over the roof slab, parapet wall when the concrete is green at any height and making the surface even and smooth without using extra cement mixed with liquid integral water proofing compound as per manufacturer's instructions complete all as specified and directed. (Note : Liquid WPC shall be measured and paid separately against respective item) |
| 6 | Supply only Liquid water proofing compound (ISI marked) complete all as specified and directed. |
| 7 | M & L for provide and laying 4 mm thick APP modified prefabricated polymeric membrane weighing not less than 4.5 Kg/Sqm, reinforced with non woven polyster matt black finished weighing not less than 100 gm/Sqm having softening point not less than 140 degree centrigrade, longitudinal tensile strength not less than 300 N/Sqcm, side lap & end lap 10cm with torch application of membrane over compatible primer @ 0.40 Ltr/Sqm and finished with bitumenous aluminium paint applied @ 0.10 Ltr/Sqm complete all as specified and as directed by the Engr-in-Charge (Note: (i) Water proofing treatment shall be carried out through an authorised applicator/authorised specialist agency of the manufacturer, who shall further have to rectify any defects (if any) at a later stage(ii) The water proofing treatment work shall have 10 years of guarantee period from the date of completion of work and the contractor has to submit certificate for the same) |
| 8 | M & L for Plain cement concrete 1:2:4, type B-1, (using 20 mm graded stone aggregate) as in roof kerb or mud stop, benching etc rounded or chamfered on edges incuding necessary form works etc complete all as specified and directed. |
| 9 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed |
| 10 | M & L for rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings and finishing surfaces even and fair without using extra cement complete all as specified and directed. |
| 11 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and fair without using extra cement complete all as specified and directed. |
| 12 | M & L for rendering 5mm thick in cement mortar 1:4, mixed with integral water proofing compound with weight of cement as per manufacturer's instructions and finished the surface even and fair without using extra cement over 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 14 | Demolition of un-reinforced cement concrete in ground floors and pavings n.exc 15cm thickness, (Below or above Ground level) and removing debris upto outside MD land complete all as directed by the Engr-in-Charge |
| 15 | M & L for glazed, coloured, ceramic, tiles of size (450 x 350 x 7mm/350 x 250 x 7mm) mm thick, on vertical surfaces such as skirting, dados etc, and set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick plaster in cement mortor 1:3 complete all as specified and directed. |
| 16 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc, and set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortor 1:4 complete all as specified and directed. |
| 17 | M & L for 25 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in sub-base of flooring, etc complete all as specified and directed. |
| 18 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc, and set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortor 1:4 complete all as specified and directed. |
| 19 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, as in vertical surfaces as in skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortor 1:4 complete all as specified and directed. |
| 20 | Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed. |
| 21 | Taking down chowkats or frames, exc 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed. |
| 22 | S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 23 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete as per specification and drawing and as directed. |
| 24 | S & F Well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 25 | Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed. |
| 26 | Taking down shutter of any descriptions exc 1 sqm but n.exc 2 sqm each and Refixing in the same opening complete as directed. |
| 27 | S & F 35 mm thick, factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on one sides and one face covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 28 | S & F 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 29 | S & F 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 30 | S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 250 mm complete all as specified and directed. |
| 31 | S & F 150 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 32 | S & F Floor door stopper of aluminium alloy body and tongue, anodised, 150 mm overall length of cover plate with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 33 | S & F in repair Floor door stopper of aluminium alloy body and tongue, anodised, 150 mm overall length of cover plate with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 34 | S & F in repair 150 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 35 | S & F in repairs 100 mm size, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 36 | M & L for Granite tiles, 20mm thick machine cut, bedded & jointed with grey cement slurry and pointed with white cement with admisture of pigment to match the shade of granite stone including cutting and polishing over and including 15mm thick screed bed in cement mortor 1:4 complete all as specified and directed. |
| 37 | M & L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 38 | Demolition of reinforced cement concrete in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 39 | M & L for use & waste Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizonal or sloping) for flat rough finished surfaces of concrete complete all as specified and directed. |
| 40 | M & L for Reinforced Cement Concrete 1:1.5:3, Type A-1 (Nominal Mix) (Using 20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, shelves etc complete all as specified and directed.(Note : Reinforcement will be measured & paid seperately) |
| 41 | S & F high strength TMT steel bars 6mm to 8mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 42 | M & L for rendering 15 mm thick in cement mortar 1:3 on fair faces of brick masonry or concrete surfaces at sunken floor and finishing the surfaces even and smooth without using extra cement mixed with water proofing compound as per manufacturer's instructions complete all as specified and directed. (Note: WPC shall be measured and paid seperately) |
| 43 | M & L for applying evenly a priming coat of industrial bitumen 85/25 at the rate of 1.2 Kg/Sqm inlcuidng cleaning the surface and providing APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/Sqm) laid on primed surfaces by forced application complete all as specified and as directed. |
| 44 | M & L for 20mm thick screed bed in cement mortar 1:4 mixed with liquid water proofing compound as per manufacturer's instructions over APP membrane in sunken floor complete all as specified and as directed. (Note: Liquid water proofing compound shall be measured and paid seperately as supply) |
| 45 | S & F 40 mm dia, Low density, Polyethylene (LDPE) pipe of pressure rating 6 Kg/cm2 laid at lowest point with 30cm projection beyond outer face of the wall in sunken floor complete all as specified and directed. |
| 46 | M & L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed. |
| 47 | Taking down pipes of any size and any pattern jointed in cement mortar, taking out of wall, eaves gutters and rainwater/soil/waste pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed |
| 48 | S & F 110 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, etc complete all as specified and directed. |
| 49 | S & F 75 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, etc complete all as specified and directed. |
| 50 | S & F 110 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wall, etc with all necessary fixing arrangement complete all as specified and directed. |
| 51 | S & F 75 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wall, etc with all necessary fixing arrangement complete all as specified and directed |
| 52 | S & F 110 mm bore, PVC (SWR) bends of any radius with oval access door complete all as specified and directed. |
| 53 | S & F 75 mm bore, PVC (SWR) bends of any radius with oval access door complete all as specified and directed. |
| 54 | S & F 110mm bore, PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. |
| 55 | S & F 75mm bore, PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed. |
| 56 | S & F 110 mm bore, PVC (SWR) branch piece, single (single Y) equal or unequal provided with access door complete all as specified and directed. |
| 57 | S & F 75 mm bore, PVC (SWR) branch piece, single (single Y) equal or unequal provided with access door complete all as specified and directed. |
| 58 | S & F 110 mm bore, PVC (SWR) branch piece, double (double Y) equal or unequal with oval access door complete all as specified and directed. |
| 59 | S & F 75 mm bore, PVC (SWR) branch piece, double (double Y) equal or unequal with oval access door complete all as specified and directed. |
| 60 | S & F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm bore of pipe complete all as specified and directed. |
| 61 | S & F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm bore of pipe complete all as specified and directed. |
| 62 | S & F 110 mm bore, PVC (SWR) vent cowl complete all as specified and directed. |
| 63 | S & F 75 mm bore, PVC (SWR) vent cowl complete all as specified and directed. |
| 64 | Demoltion of Brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles as directed by the Engr-in-Charge. |
| 65 | M & L for Pre-cast cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate), block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed. |
| 66 | S & F in repairs, stainless steel kitchen sinks with drainage board made of 1 mm thick sheet for kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm including coupling, PVC waste pipe of 32mm bore complete all as specified and directed. |
| 67 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal from site complete all as directed. |
| 68 | Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal from site complete all as directed. |
| 69 | Supply, laying, connection and testing, 15mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc in 'short length' complete all as specified and directed. |
| 70 | M & L for Cutting chases in stone concrete block or slab wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10 cm girth complete all as specified and directed. |
| 71 | Supply, laying, connection and testing, 20mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed. |
| 72 | S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), 'P' or 'S' trap, white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with PVC seat and cover (white), closed pattern with flat bottom and cover brass chromium plated hinging device complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed. |
| 73 | S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern, float, overflow pipe and handle including brackets complete all as specified and directed. |
| 74 | S & F in repairs vitreous China wash basin, size 550 x 400mm, white, flat back including brackets, cutting for and pinning in ends of brackets or erecting stand with and including brass chromium plated perforated waste coupling/fittings, 32mm dia with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe of 32mm bore of suitable length, 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection pipe, 15mm size with PTMT nuts of length 450mm and fixed complete all as specified and directed. |
| 75 | S & F in repair 15mm bore, Long body bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 76 | S & F in repairs, 15 mm bore, Stop valves, fancy type, cast copper alloy, chromium plated with long shank and cup, concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 77 | S & F in repairs, 15 mm bore, Stop/angle valves, fancy type cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 78 | S & F in repairs 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed. |
| 79 | S & F in repair 125 mm size, Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 80 | S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specifiedcomplete all as specified and directed. |
| 81 | S & F in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 82 | S & F in repairs chromium plated Soap dish of standard size, fixed in walls with plugs & chromium plated brass screws complete all as specified and directed. |
| 83 | S & F in repair 20 mm bore, Brass chromium plated, tubular towel rail, D type, 60 cm long between flanges with brackets complete all as specified and directed. |
| 84 | S & F in repair PVC (SWR) floor trap, with grating including jointing to waste pipe with solvent cement, dia of outlet 75 mm complete all as specified and directed. |
| 85 | S & F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 86 | M & L preparing old decorated surfaces of ceiling, etc including cornices by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying two coats of white wash complete all as specified and directed. |
| 87 | M & L preparing old decorated surfaces of walls, etc including cornices by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying two coats of white wash complete all as specified and directed. |
| 88 | M & L for complete removal of existing treatment from old decorated plastered surfaces of wall and applying 3mm thick wall care putty to an even and smooth surface and applying two coats of distemper oil emulsion (washable) over a coat of alkali resistant primer complete all as specified and directed. |
| 89 | M & L for preparation of new plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 90 | M & L for Preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed. |
| 91 | M & L for Preparation of old painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 92 | S & F in repair 600mmX450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromiun plated brass screws and cup washers complete all as specified and directed. |
| 93 | S & F in repairs, drapery rod, 20mm dia, mild steel, chromium plated including side caps and brackets complete all as specified and directed. |
| 94 | M & L for 20-25 mm thick Machine cut kota stone slab as in flooring laid over and including 20 mm thick screed bed in cement mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 95 | M & L for Machine cut kota stone slab, 20 to 25mm thick as in riser of steps, skirting, dado and pillar etc laid over 10 mm thick, cement screed bed in cement mortar 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 96 | S & F in repairs, Stainless steel, kitchen plate rack of size 0.90m x 1.2m (weight not less than 3.5 Kg) as approved complete all as specified and directed. |
| 97 | M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed. |
| 98 | M & L for Chequered cement concrete tiles of size 30cm x 30cm x 20-22mm thick, as in floors etc over and including 20 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed in grey cement and pigments to match with the shade of tiles complete all as specified and directed. |
| 99 | M & L for 75 mm thick, plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub-base of flooring, etc complete all as specified and directed. |
| 100 | M & L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 101 | M & L for plain cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed. |
| 102 | M & L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of alkali resistant primer and over 3mm thick wall care putty to a smooth surface complete all as specified and directed. |
| 103 | M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 104 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed. |
| 105 | M & L for Point wiring for one light/exhaust fan/fan point controlled by one way switch with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLS (ISI marked) drawn through and including non metallic PVC casing capping of uitable size (ISI marked) with all fittings/accessories surface fitted type including provision of multistranded 1.5 Sq.mm copper conductor cable FRLS [ISI marked] as earth wire connected to common earth dolly and earth in distribution board complete all as specified and as directed.(Note.: (i) The rate quoted is deemed to include making good the disturbed sufaces and to match the adjoining surface, (ii) Sunken box and modular cover plate with frame shall be measured and paid seperately. (iii) Blank plate required if any shall deemed to be included in the unit quoted rate) |
| 106 | All as per item No. 104 above but for One light point controlled by two Nos two way switch complete ditto |
| 107 | All as per item No. 104 above but for One 3 pin 5A socket outlet on independent board complete ditto |
| 108 | All as per item No. 104 above but for One 3 pin 5A socket outlet on same board complete all as specified and as directed. |
| 109 | All as per item No. 104 above but for One Bell/buzzer point controlled by one push button switch on the same board with other switches or independent board with 1.5 Sqmm size of FRLS cable complete ditto |
| 110 | All as per item No. 104 here in before but for one 15 Amps socket outlet on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 2.5 sqmm multistranded FRLS (ISI marked) and 2.5 sqmm PVC insulated unsheathed solid copper conductor cable FRLS (ISI marked) as earth lead complete ditto. |
| 111 | S & F Bell Multi Music type, 230 volts, single pole complete all as specified and as directed. |
| 112 | S & F ceiling rose, three terminals, PVC/polycarbonate, isolated body complete all as specified and directed. |
| 113 | S & F switch modular single pole one way 6 amp 230 volts AC, 50 Hz 1 Module complete all as specified and as directed. |
| 114 | S & F switch modular single pole Two way, 6 amp 230 volts, 50 Hz, 1 module complete all as specified and as directed. |
| 115 | S & F modular bell push 6 Amp, 230 Volts, AC, 50 Hz, 1 module complete all as specified and as directed. |
| 116 | S & F switch modular single pole one way 16 amp 230 volts AC, 50 Hz, 1 Module complete all as specified and as directed. |
| 117 | S & F Modular socket outlet 6A, 2/3 pin combined, 2 module complete all as specified and as directed. |
| 118 | S & F Modular socket outlet 6A/16A, 2/3 pin combined, 2 module complete all as specified and as directed. |
| 119 | S & F Modular metal flush box, 1/2 module complete all as specified and as directed. |
| 120 | S & F Modular metal flush box, 3 module complete all as specified and as directed. |
| 121 | S & F Modular metal flush box, 4 module complete all as specified and as directed. |
| 122 | S & F Modular metal flush box, 6 module complete all as specified and as directed. |
| 123 | S & F Modular white cover plate with frame, 1 module complete all as specified and as directed. |
| 124 | S & F Modular white cover plate with frame, 2 module complete all as specified and as directed. |
| 125 | S & F Modular white cover plate with frame, 3 module complete all as specified and as directed. |
| 126 | S & F Modular white cover plate with frame, 4 module complete all as specified and as directed. |
| 127 | S & F Modular white cover plate with frame, 6 module complete all as specified and as directed. |
| 128 | Taking down existing unserviceable DBs with MCBs and S & F Distribution Board, SPN, 8 way, 240V, Double door with 200 Amps rated bus bar complete all as specified and as diretced complete all as specified and directed. |
| 129 | S & F miniature circuit breaker (MCB), SPN, 32 Amps rating, 240 Volts, 10KA, C Curve complete all as specified and as directed |
| 130 | S & F miniature circuit breaker (MCB), SP, 6 to 32 Amps rating, 240 Volts, 10KA, C Curve complete all as specified and as directed |
| 131 | Supply and fixing LED lights fitting, 25W, 125 Lum/Watts, 4ft batten comprising of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white complete all as specified and directed. (Make: Havell's Cat No. No. LHEXAWPN7IN1W025 or equivalent make as per list of manufacturer's) |
| 132 | Supply and fixing 12 W LED surface panel light, colour white complete all as specified and directed. (Make: LUKER Cat No. No. LNPSRR12 or equivalent make as per list of manufacturer's) |
| 133 | Supply and fixing LED light fittings mirror type with high out put deffuser, 2 feet, 10 Watt, 220 V AC, decorative type with driver holder and LED lamp including connecting up with thre core flexible copper conductor cable of suitable size complete all as specified and directed. (Make: Havell's Cat No. No. LHEXACP5IN1W010 or equivalent make as per list of manufacturer's) |
| 134 | Supply and fixing Indoor wall light fittings of suitable size with warm white bulb, 12 Watt complete all as specified and directed. (Make: Havell's Cat No. No. LHFOFWE1TZ1W012 or equivalent make as per list of manufacturer's) |
| 135 | S & F Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps complete all as specified and as directed. |
| 136 | M & L for Sub main wiring with 2 runs of Single core 4 sqmm PVC insulated multi stranded FRLS (ISI marked) copper conductor cable drawn through and including surface PVC casing capping of suitable size, medium grade with all fittings along with 1 run of single core 4 sqmm PVC insulated multi stranded FRLS (ISI marked) copper conductor cable as earth continuity conductor including taking down existing submain wiring complete all as specified and as directed.(Note :- Two runs of 4 sqmm and one runs of 4 sqmm cable as earth wire and one run of casing capping shall be measured as one length) |
| 137 | M & L for Sub main wiring with 2 runs of Single core 6 sqmm PVC insulated multi stranded FRLS (ISI marked) copper conductor cable drawn through and including surface PVC casing capping of suitable size, medium grade with all fittings along with 1 run of single core 6 sqmm PVC insulated multi stranded FRLS (ISI marked) copper conductor cable as earth continuity conductor including taking down existing submain wiring complete all as specified and as directed.(Note :- Two runs of 6 sqmm and one runs of 6 sqmm cable as earth wire and one run of casin capping shall be measured as one length) |
| 138 | Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10 cm girth complete all as specified and directed. |
| 139 | Supply and fix exhaust fan, steel body AC single Phase, 230V of size 300mm sweep with, blades, and frame and louvers, complete with all accessories and electric connection including making necessary holes in walls and making good disturbed surfaces as per the existing one complete all as specified and directed |
| 140 | S & F 10 W LED Bulk head luminaries including LED light, driver holder and connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 141 | S & F Street light bracket made of GI pipe, 32mm bore, medium grade of length not less than 1.2 m fixed to pole etc with suitable size flat iron clamp of size 32x6mm, two Nos with nuts, bolts including painting with two coats of aluminium paint over a coat of red oxide, zinc chrome primer complete all as specified and directed. |
| 142 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 143 | Taking out unserviceable heating element and S & F new heating element, 1.5 KW, Dual clip type with rubber gasket suitable for geysers upto 25 Litre capacity complete all as specified and directed. |
| 144 | Taking out unserviceable Geyser Copper Drum and S & F new Copper Drum suitable for geyser upto 25 Litre capacity complete all as specified and directed. Total in Figures 0.0 0.0 Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender