Tender For Addition Alteration Of Certain Works At Bldg No P-103 At Afssr And Provision Of Storage Accommodation For Ge Office Under Ge (Af) Gurgaon
Tender Value
44.03 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
13 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration Of Certain Works At Bldg No P-103 At Afssr And Provision Of Storage Accommodation For Ge Office Under Ge (Af) Gurgaon
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. |
| 2 | Demolition reinforced cement concrete in roofs, floors (other than ground floors), beams staircases, landing, chajjas, Shelves and similar suspended work (reinforcement cut as required to facilitate demolition) |
| 3 | Dismantling Floor, Paver Tiles, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed. |
| 4 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), including removal of rubbish outside MoD land, complete all as specified and as directed. |
| 5 | M&L for brick work with sub class \\"B\\" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed |
| 6 | M&L Rendering (External) 15mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, mixing WPC as per manufacturers instructions, Plastered Surfaces finished Fair and Even, complete all as specified and as directed.NOTE: WPC will be Measured and Paid under appropriate Item. Area includes in this items upto 4 stories of building. |
| 7 | M&L for rendering 15 mm thick on brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts in patches in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed. |
| 9 | M&L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, roof padding, staging of water tank, benching etc and similar nature of works mixed with water liquid proofing admixture as per manufacturer's instruction including finishing even and smooth using extra cement and rounded or chamfered on edges and necessary foamwork complete all as specified and directed by Engineer-in-Charge. Note :- (i) WPC shall be measured and paid separately. (ii) Rates include to carried out the work on roof slabof building & nothing extra shall be admissible on this account). |
| 10 | Supply only integral water proofing compound. |
| 11 | M&L for 2mm thick birla white putty and making the surface smooth etc complete as specified and directed |
| 12 | M&L for preparing old plastered surface of walls and applying two coat of oil emulsion distemper white or any tint etc complete as specified and directed |
| 13 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces including preparing old Decorated/Treated Plastered surfaces of Walls by Complete Removal of existing Treatment and by applying 2mm thick plaster of paris Wall Putty, cutting/ rubbing to obtained a Smooth Surface complete all as specified and as directed. |
| 14 | Taking down Chowkats or frames from the opening of size exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr each with shutters ( without taking off shutters from the frames) complete all as specified and directed. |
| 15 | Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed |
| 16 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be include in the quoted lum sum). →Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 17 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be included in the lumpsum quoted by the contractor. |
| 18 | M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in floor finishing complete all as specified and directed |
| 19 | M&L for Polish Glazed Vitirified Ceramic Tiles 10mm thick (Square/Rectangular), Light shade Polished, area of each Tile exc. 0.42 Square Metre but not exc 1.0 Sqm as in Floors, etc. set and jointed in Neat Cement Slurry and pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate. |
| 20 | M&L for Polish Glazed Vitirified Ceramic Tiles 10mm thick (Square/Rectangular), Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Floors, etc. set and jointed in Neat Cement Slurry and pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate. |
| 21 | M&L for Polish Glazed Vitirified Ceramic Tiles 10mm thick (Square/ Rectangular) Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost of Cement Mortar shall deem to be include in the Quoted Unit Rate. |
| 22 | M&L Coloured Glazed Ceramic Tiles 300x600x7mm thick in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost of Rendering Cement Mortar shall deem to be include in the Quoted Unit Rate. |
| 23 | M&L for non-skid tiles ceramic coloured tiles 7 to 8 mm thick of size 400mmx400 mm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) complete all as specified and as directed.NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate. |
| 24 | M & L broken brick bats as in foundation for Loose filling with aggregates of gauge 40 to 80mm complete all as specified and as directed. |
| 25 | M&L for granite (Black) stone slab 15-18mm thick machine cut and machine polised, in skirting, Kitchen platform /dado, in floor etc laid over cement screed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including pinning in brick/concrete wall to hold & support the vertical surfaces to granite work including drilling to wall & including screed bed 15 mm thick in cement mortar 1:4 complete all as specified and as directed by Engineer-In- Charge. |
| 26 | Dismantling Structural Steel or Mild Steel Work of any description including Framed Truss, etc., complete all as specified and as directed. |
| 27 | Dismantling damaged/unserviceable Galvalume, Fibre Glass Reinforced Translucent Corrugated Sheeting,AC and Fiber Sheeting of any gauge and thickness, complete all as specified and as directed. |
| 28 | M&L Steel Work in Tubular Trusses including Special shaped Washer etc. complete using ERW or Induction Butt Welded Tubes, confirming to IS-1161-1979 Grade-240, complete all as specified and as directed. |
| 29 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 30 | S&F 5-6 mm hollow PVC Wall Lining consisting of 5mm thick single side prelam PVC colour sheet inclusive of solvent cement and fixing at site including 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification. |
| 31 | S&F for PVC fluted panel wall Panneling printed in any colour PVC sheet inclusive of solvent cement and fixing at site on PVC Frame as per specification complete all as specified and as directed.Note : Design /Pattern will be selected by GE/Engr-in-Charge. |
| 32 | S&F Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including taking down old curtain rod of any description, complete all as specified and as directed. |
| 33 | S&F One Piece Euorpen Water Closet Concealed of size 790x360x650mm Snow White, Soft Close Seat Cover having Twin Flush Fittings and Making Good to Floor/ distrubed Surfaces, complete all as specified and as directed. |
| 34 | S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back) with Brass Chromium Plated Waste Fitting 32mm bore (dia) and PVC Waste Pipe 32mm bore (dia) including a Pair of Cast Iron Brackets Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed-in-repairs, complete all as specified and as directed. CAT PART NO 10052 of HINDWARE or equivalent as approved . |
| 35 | S&F Bib Tap 15mm bore (dia), Cast Copper alloy, Fancy type Chromium Plated with Crutch or Butterfly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and Chromium Plated Wall Flange complete all as specified and as directed by Engineer-in-Charg. Cat Part No PRS-CHR 043 of Make : JAQUAR, or equivalent as approved by GE. |
| 36 | S & F central hole basin mixer chromium plated fancy type cast copper alloy with auto closing system Cat Part NO CON-CHR-169KNB of Make : JAQUAR or equivalent as approved screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 37 | S&F Stop Cock/ Angle Valve 15mm bore (dia), Cast Copper Alloy, Fancy type, Chromium Plated with long Shank and Cup (Concealed type), screwed down, high pressure and fixing-in-repairs, complete all as specified and as directed. with Cat Part No COT-CHR 23053 of Make : JAQUAR, or equivalent complete all as specified and directed by Engineer-in-Charge. |
| 38 | S & F Glass corner self chromium plated fancy type cast copper alloy with Cat Part No ACN-CHR-1173 of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge. |
| 39 | S & F double arm wall mounted mirror with Cat Part No ACN-CHR-1193N of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge. |
| 40 | S & F glass self 600mm long with Cat Part No ACN-CHR-1171N of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge. |
| 41 | S & F paper holder with Cat Part No AHS-CHR-1553 of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge. |
| 42 | S & F soap dish holder with Cat Part No AQN-CHR-7731 of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge. |
| 43 | S & F towel rack with Cat Part No AHS-CHR-1581H of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge. |
| 44 | S & F towel ring with Cat Part No AQN-CHR-7721 of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge. |
| 45 | S & F towel rail 600mm long with Cat Part No AKP-CHR-35711PS of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge. |
| 46 | S&F chromium plated shower roses 125 mm with or without swivel joints,any size including fixing to steel pipe or union for 15mm bore of pipe complete all as specified and directed. |
| 47 | S&F Wall Mixer 15mm bore (dia), Chromium Plated, Telephonic type with Flanges including Telephonic Shower Tube 1.50 Metre long with Hook and fixing-in-repairs, complete all as specified and as directed. Cat Part No KUP-CHR-35115P of Make : JAQUAR, or equivalent. |
| 48 | S&F Stop Cock 15mm bore (dia), Cast Copper Alloy, Fancy type, Chromium Plated with long Shank and Cup (Concealed type), screwed down, high pressure and fixing-in-repairs, complete all as specified and as directed. Cat Part No ALD-CHR-089CQT of Make : JAQUAR, or equivalent as approved , complete all as specified and directed by Engineer-in-Charge. |
| 49 | S&F PVC Connection Pipe 15mm size and 45 Cm in length with Adopter Nuts of PVC and fixed-in-repairs, complete all as specified and as directed. MAKE : PRAYAG CAT No. 324 / POLYTUFF |
| 50 | S&F Health Faucet with Wall Hook, Chromium Plated having 1.00 Metre long with PVC Hose Pipe and fixed in repairs, complete all as specified and as directed.MAKE : JAQUAR ALD-CHR-585 or equivalent in GEM/ MARC (as approved by GE). |
| 51 | S&F decorative led type mirroor of selected quality glass, fixed to wooden plugs with CP Brass screws and cup washers with aluminium beading, size and design as complete all as specified and directed by Engr in charge. |
| 52 | S&F of one way reflective toughened glass 12mm thickness with its necessary fittings, shade of glass as directed by Engr-in-charge.Make Saint Gobain or Modi equivalent |
| 53 | M&L for of transparent toughened glass door of 12mm thickness and its fitting as required including stainless steel L connector 75mm wide on bothside with PVC acrylic sheet inside and fixing with SS 304 grade screw as required and Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with SS 304 grade cover, governing pivot made of brass, other parts made of mild steel heavy duty , SS 304 grade D type circular handle of 450mm length and 25mm dia with locking arrangement of SS 304 grade lock, self closing hydarulic stainless steel 304 grade top/bottom patch with pivot and self adhessive film shade as required for complete all as specifed and as directed by Engr -in-Charge |
| 54 | M&L for PCC (1:2:4) type B1, (using 20mm graded crushed stone aggregate) as in cement concrete in roof kerbs or mud stops, rounded or chamfered on edges. |
| 55 | M&L for preparation of new surface of any description and applying two coats of synthetic enamelled paint over a coat of red oxide primer on steel surface over 10cm width or girth complete all as specifed. |
| 56 | M&L preparing old Treated/Painted Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed. |
| 57 | Supplying and laying of 15mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete all as specified and directed by Engineer-in-Charge. |
| 58 | Ditto but 25mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 59 | M&L and applying designer Plaster of Paris (POP) false ceiling consisting of frame work made with 50 mm square MS tube of 18 Gauge thickness as main runner at 600 mm c/c both ways suspended/supported with MS flats 25x4 mm from existing RCC slab including providing and fixing expanded metal of size 5.25mmx1.25 mm thickness welded to main runner and applying POP (Plaster of Paris) to the expanded metal of thickness not less than 10 mm finished smooth to line and level and applying two coat of plastic emulsion paint design as approved by Engr-in-Charge with necessary support scaffolding etc as required and including applying a coat of red oxide zinc chromate primer over the MS frame work and also including fixing of ceiling lights as per size of ceiling and all as per direction of Engr-in-Charge. |
| 60 | S&F GI Powder coated GI Snap Grid Frame Work of size 605x605mm as in False Ceiling with supported hanging of Mild Steel Rod of 'J' Bolt, complete all as specified and as directed. |
| 61 | M&L for 12 mm thick perforated particle board/ tiles for insulation and accoustic purposes, 60x60 cm in size,fixed with nails or with staple in ceiling/ timber frame complete all as specified. |
| 62 | M&L for 15 mm thick plaster in CM (1:4) mixed with water proofing compound on roof slabs finished even and smooth without using extra cement after cleaning of roof surfaces with wire brushes , cutting or uprooting grass on old plastered surfaces, removing rubbish off the premises, cleaning surface and preparing to receive new plaster complete all as specified and directed by Engr-in-Charge. Notes : WPC shall be measured and paid seperately |
| 63 | M&L for applying evenly 3 coat of elastomeric liquid applied membrane of Home Shield PU roofkoat of Berger or equalvent as approved by Engrineer-In-Charge as in Roof portion where leakage and seepage are noticed and as directed by approved applicater. |
| 64 | Excavation in trenches, not exceeding 1.5 M wide, and not exceeding 1.5 M in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed. |
| 65 | Returning & filling of the excavated earth including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils. complete all as specified and directed |
| 66 | Removing Excavated soils n. exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point. complete all as specified and directed |
| 67 | M&L for reinforced Cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in beams, cantilever, ressummeers ,lintels over 1.5 span complete all as specified and directed. |
| 68 | M&L for mild steel TMT bars 10 mm dia and over, cut to length and bent to shape required and binding with mild steel wire dia not less than 0.9 mm (annealed) complete all as specified complete all as specified and as directed. |
| 69 | All as per item No but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binderscomplete all as specified complete all as specified and as directed. |
| 70 | M & L for Formwork to soffits of floor or roof beam, beam haunching, girders, lintels, cantilivers, shelvesincluding supports, overhang, etc. also splays between floor and beams, for rough finished surface of concrete etc. complete all as specified and directed. |
| 71 | M&L for Pre-Cast reinforced cement concrete 1:2:4 type B-1 with using 20 mm graded crushed stone aggregates as in cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plan faces set in cement mortar (1:4) including necessary use and waste form work etc complete all as specified and as directed Note - Reinforcement shall be measured and paid separetly |
| 72 | S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as spd and directed |
| 73 | S&F Aluminium Barrel Tower Bolt 150mm long (weight not less than 210 Gram), extruded section, complete all as specified and as directed |
| 74 | S&F Aluminium alloy, anodized, Sliding Door Bolt 200mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet cast or extruded section and fixing Bolts and Sliding Bolts of extruded section and fixing, complete all as specified and as directed. |
| 75 | S&F Stainless Steel Butt Hinge of size 100mm (weight not less than 80 Gram), complete all as specified and as directed. |
| 76 | S&F Extruded Aluminium alloy Handle 150mm long (weight not less than 120 Gram), Fabricated type, anodised, complete all as specified and as directed. |
| 77 | S&F Door Closer Aluminium (Die Cast) Body, hydraulically regulated, Designation No. 3, Universal type, suitable for Door Shutters of 851mm to 1000mm in width and of weight between 61.00 to 80.00 Kilogram and fixed-in-repairs, complete all as specified and as directed. |
| 78 | M&L 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement |
| 79 | M&L PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement |
| 80 | S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore complete all as specified. |
| 81 | S&F 110mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 82 | S&F 75mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 83 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/fixed to wall complete all as specified and as directed. |
| 84 | S&F gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore complete all as specified and as directed |
| 85 | S&F gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 15 mm bore complete all as specified and as directed |
| 86 | S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with aluminium alloy brackets and guard rail glass self 600mm long as approved complete all as specified and directed by Engineer-in-Charge. |
| 87 | S&F Double Action Floor Spring hydraulically regulated made up of minimum 1.25mm thick Aluminium alloy Sheet Foundation Box, Main Body with Stainless Steel Cover, Governing Pivot made of Brass, other Parts made of Mild Steel heavy duty and fixed-in-repairs, complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 88 | S&F Double Action Floor Spring hydraulically regulated made up of minimum 1.25mm thick Aluminium alloy Sheet Foundation Box, Main Body with Stainless Steel Cover, Governing Pivot made of Brass, other Parts made of Mild Steel heavy duty and fixed-in-repairs, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender