Tender For Special Repair To Building No P-72 To P-73 At Bb Cantt, Srinagar.
Tender Value
25.24 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
4 days left
EMD
50500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No P-72 To P-73 At Bb Cantt, Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws incl Dismantling of corrugated steel sheeting, any gauge thickness , including nanital or similar pattern roof covering, complete all as specified and directed. |
| 2 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws incl Dismantling of plain steel sheeting, any gauge thickness , including nanital or similar pattern roof covering, complete all as specified and directed. |
| 3 | M&L for wind ties over roof sheet fixed FI of size 40x5mm with suitable arrangements including securing bolts; complete all as specified and directed. |
| 4 | M&L for wrought Second class hard-wood in scantlings frame work incl Dismantling of timber scantlings 40 sq. cm and over in section, in any position unframed work, complete all as specified and directed. |
| 5 | M&L for Weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps including dismantling of old boarding, complete all as specified and directed. |
| 6 | S&F 15mm thick second class hardwood boarding as in below roof sheet planed one side, with butt joints and fixed with nails including beading, filltets, cornices etc., complete all as specified and directed. |
| 7 | S&F khatamband pattern false ceiling, design as approved by GE with ornamental wood work made out of 1st class soft wood (Deodar) including fillets/cornices and finally finishing with french polish (Two or more coats) including dismantling wall and ceiling boards (fibre, pulp, insulation, etc.), complete all as specified and directed. |
| 8 | S&F 10-12mm thick 4 inch complete knot free polished with P U material glossy finish 1st class softwood wooden(Australian) panelling fixed with tounged and grouted a wall panelling and including fillets/cornices and 9mm ply wood fixing on wall including dismantling of old boarding , complete all as specified and directed. |
| 9 | M & L for 9mm thick plywood, grade BWR fixed with screws to frame work as in false ceiling including dismantling old boards, complete all as specified and directed |
| 10 | S & F in repair 20mm thick designer eaves board as in edges of roof covering incl all scaffolding, fixing and accessories as required onsite, design as approved including dismantling of old boards, complete all as specified and directed. |
| 11 | Taking down frame with shutters (without taking off shutters from frame) n.exc 1.5 sq.m each, complete all as specified and directed. |
| 12 | Taking down frame with shutters (without taking off shutters from frame) exc 1.5 sqm but n.exc 4 sqm each, complete all as specified and directed. |
| 13 | M & L for 2nd class hard-wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 14 | M&L for 35mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln easoned and chemically pressure treated including suitable nos of handles, towerbolt, sliding door bolt and hinges, complete all as specified and directed. |
| 15 | M & L for Panelled door of 35mm 1st class hard wood with 1st class wooden chaukhat(size 100x65 c/s) duly carved on panels of chinar leaves (hand carving)with 25mm thick panels fixed on top and bottom with decorative type wooden beading of 1st class hard wood on sides of panels duly varnished two coats over a coat of primer including preparation of surfaces with decorative type handles of size 30 cm 2 nos on each leaf and 2 nos of tower bolt of 200mm size with 3 nos of 100mm hinges on each leaf and one no 300mm long sliding bolt, complete all as specified and directed. |
| 16 | M & L for 30mm thick 2nd class hardwood factory made glazed and skeleton door/window shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats including suitable nos of handles, towerbolt, sliding door bolt and hinges, complete all as specified and directed. |
| 17 | S & F Mild steel conforming to Fe-290-0 GdeE-165 complete. in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars,frame work for chowkhat of iron doors & windows including holdfast, ladders; railings frame work of water tanks and similar work welded, complete all as specified and directed. |
| 18 | S&F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in squares/rectangular window pane n.exc 0.5 sqm in each panes etc., complete all as specified and directed. |
| 19 | S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc., complete all as specified and directed. |
| 20 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed. |
| 21 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 22 | S & F aluminum anodized, barrel tower bolt of extruded section 200mm long, ISI marked, complete all as specified and directed. |
| 23 | S & F 150 mm long, extruded aluminium alloy handle, fabricated type, complete all as specified and directed. |
| 24 | S & F 100mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 25 | M&L 9mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work including dismantling old boarding, complete all as specified and directed. |
| 26 | M&L Vitrified Ceramic tiles 8 mm thick dark / light shade(square/ rectangular) , polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick Screed bed or bedding layer in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and directed. |
| 27 | M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and directed. |
| 28 | M&L coloured glazed ceramic tiles of size 1200x600x 7 to 8 mm thick as in skirting/dado, wall, vertical serfaces etc. set and jointed in neat cement slurry with 5mm spacer & filling the joints with epoxy grout filling as per manufacture's instruction and pointed in white or colour cement to match the shade of tiles including 10mm thick backing coat in CM 1:4, etc including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and directed. |
| 29 | M & L for rendering 10mm thick cement plaster in CM (1:6) on brick work or concrete surfaces finished even and smoothwithout using extra cement including taking down cement plaster and removing the debries out side MoD land, complete all as specified and directed. |
| 30 | M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 etc including demolition brick work, complete all as specified and directed. |
| 31 | M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan exc 6m mean radius Iin half brick thk wall and built in CM 1:6 etc including demolition brick work, complete all as specified and directed. |
| 32 | M&L for Preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 33 | M&L for Preparation of old painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint,complete all as specified and directed. |
| 34 | M/L18mm thick granite (of any type) work (table rubbed and polished and moulding) in platforms, steps, jambs, pillar, counter WHB, floor laid over and including 20mm thick in cement mortar (1:6) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite,including nosing of edges as required , complete all as specified and directed. |
| 35 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 36 | M & L for plain cement concrete 1:4:8 Type D-2(using 40mm graded crushed stone aggregate) 75mm thick, as in sub base over rammed earth, complete all as specified and directed. |
| 37 | M&L for rubber moulded coloured chequered cement concrete tiles 30cmx30cmx25mm thick with grey cement and pigments laid over and including 20mm thick screed bed or bedding layer in cement mortor (1:6) set , jointed and pointed in neat cement slurry, complete all as specified and directed. |
| 38 | S&F 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part I including dismantling PVC water tanks exc 250 litres and not exc 500 litres capacity etc., complete all as specified and directed. |
| 39 | S&F 15mm dia GI tubing (medium grade) with all fitting and fixed to wall and ceiling etc. Including taking down old GI tubing, complete all as specified and directed. |
| 40 | S&F 20mm dia GI tubing (medium grade) with all fitting nd fixed to wall and ceiling including aking down old GI tubing, complete all as specified and directed. |
| 41 | S&F Wash Hand Basin (Vanity ) long patern type of 78cmx48cm including all fittings with decorative cabinet with Door/Shutter and 02 No drawers, complete all as specified and directed. |
| 42 | S&F in repair Vitreous China wash down water closet one piece pan (Pedestal pattern), white/colour (including all fitting all fixing bolts, flushing cistern, jet spray and flush pipe) complete all as specified and directed . |
| 43 | S & F shower rose chromium plated of 125mm size with swivel joints incvl, fixing to steel puipe or union of 15mm bore, fixed in repairs, complete all as specified and directed. |
| 44 | S & F in repair, angle cock, 15mm dia chromium plated, cast copper alloy, fancy type, ISI marked, screwed down, high pressure with capstan head, screwed both ends for iron pipes or for unions, complete all as specified and directed. |
| 45 | S & F in repair brass tubular towel rail (finish Glossy), 20mm dia, D type, 60cm long between flanges , complete all as specified and directed. |
| 46 | S & F In repairs for Corner Glass shelf 300x300 mm (Big) 225 x 225 mm(medium) &150x150 mm (small) three set, complete all as specified and directed. |
| 47 | S & F glass shelf assembly consisting of glass shelf, 60cm long and 12 cm wide with CP bracket and guard railing fixed in repair, complete all as specified and directed. |
| 48 | S & F in repair PVC connections 600 mm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and directed. |
| 49 | S & F 450mmx600mm size and 5.5mm thick looking mirror of selected quality, beveled edge glass mounted on 6mm thick AC building board with aluminium beading and rubber packing and fixed to wall with wooden plug with chromium plated brass screw and cup washer fixed in repair, complete all as specified and directed. |
| 50 | S & F stainless steel sink 1.00mm thick, ISI marked for kitchen with plug, waste PVC pipe, washers including cantilever cast iron brackets connecting union waste pipe of size 485 mm x 410 mm with bowl size 410 mm x 350mm x 20 mm etc fixed in repair,complete all as specified and directed. |
| 51 | S/F in repair Sink mixer 2 in 1, chromium plated, fancy type with capstan head handle, screwed down high pressure with lettered hot and cold including CP brass flange and necessary extension nipple screwed for 15 mm dia pipe, complete all as specified and directed. |
| 52 | S&F in repairs 15mm bore Brass CP wall mixer 3 in 1 for mixing hot & cold water screwed down for iron pipe and fixed with all connected fittings & fixtures, complete all as specified and directed. |
| 53 | S & F brass chromium plated swan neck, hot and cold central hole, basin mixer for mixing hot and cold water, fancy type with capstan head handle, screwed down high for 15mm bore pipe or union fixed in repair, complete all as specified and directed. |
| 54 | S/F in repair stainless steel plate rack 1mm thick of size 600 x 900 x 250 mm with stainless steel screw to wall, complete all as specified and directed. |
| 55 | S& F in repair PVC floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20mm geaded crushed stone aggregate of 110 mm dia, complete all as specified and directed. |
| 56 | M&L for plain cement concrete type C-1 1:3:6 (using 20mm graded agg) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement incl making joints every 2.5m and corner filled with bitumen 85/25, complete all as specified and directed. |
| 57 | S&F 110 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls & Taking down pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed. |
| 58 | S&F 75 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls Taking down pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. complete all as specified and directed. |
| 59 | Cutting into existing manholes of internal dia of pipe 150mm for connecting new drains, making good to pipe and rendering, cutting out existing benching for and and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished , and reforming benching as required, complete all as specified and directed |
| 60 | S&F in repair 25mm dia stainless steel drapery curtain rods, heavy duty, fancy type with fancy brackets & domes (two in each door and window) complete all as specifeid and directed. |
| 61 | M&L for taking down carefully existing old burnt out / unserviceable aluminium / copper point wiring system any type/ size and any description complete for light, fan,bell,socket, power points etc complete including removing the all type of fittings & fixture alongwith it connected fixing acessories such as all switches, sockets, ceiling roses, holder,regulators,bell etc complete and removing of all the old materials from the site for to taking as a schedule of credit, complete all as specified and directed. |
| 62 | M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system concealed or on surface wall with the help of heavy duty ISI mark PVC conduit pipe ISI mark in any lengthy wiring system and along with its all connected fittings accessories including providing of pressed steel terminal sunken boxes or heavy duty PVC box and duly fixed it concealed in wall and alongwith providing of back and face top covered plate frame or electro plated plastic laminated sheet for housing / mounting of any type/size switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc., complete all as specified and directed fot rhe following:- |
| 63 | One one light point / fan point wiring system controlled by one way switch, complete all as specified and directed. |
| 64 | One 5 Amp socket outlet point wiring system fixed on same board & controlled by one way switch, complete all as specified and directed. |
| 65 | One 5 Amp socket outlet point wiring system fixed on independent board & controlled by one way switch, complete all as specified and directed. |
| 66 | Description all as per serial item No 62 here-in-before, but using PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring system and also providing of 2.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system, complete all as specified and directed. |
| 67 | Supply & fixing of modular type switch 5/6 Amps 220 Volts AC,one module , complete all as specified and directed. |
| 68 | Supply and fixing of modular type socket of 5/6 Amps 220 Volts AC, 3/5 multi pin type with two modular, complete all as specified and directed. |
| 69 | Supply and fixing of modular type switch of 15/16 Amps 220 Volts AC one module , complete all as specified and directed. |
| 70 | Supply and fixing of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular, complete all as specified and directed |
| 71 | Supply and fixing ceiling rose three terminals type made out of polycarbonate , isolated body, complete all as specified and directed |
| 72 | Supply and fixing of modular type bell push flush type single pole one way , complete all as specified and directed |
| 73 | Supply and fixing in replacement bell Ding Dong Type, 220 volt AC, Single Pole , complete all as specified and directed |
| 74 | Supply and fixing of angular/batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adhapor and back plate for housing of bulb, complete all as specified and directed |
| 75 | Supply and fixing of one/two modular type step type electronic fan regulator with having hum free step alongwith speed control know , complete all as specified and directed |
| 76 | Supply and fixing of LED tube light fitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colour complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting comlplete and including taking down of old fitting, complete all as specified and directed |
| 77 | Supply and fixing LED mirror picture wall light 3 in1 color changing light fitting with high out put diffuser 2' long and with aluminium chanel environmental friendly of 12 Watt 220 volt AC decorative type with driver holder and LED lamp with having energy efficient type complete light fitting set and including providing of suitable type flat flexible cable for electric connection from ceiling rose to fitting and making electric connection and including taking down of old existing fitting, complete all as specified and directed. |
| 78 | Supply and fixing of surface wall mounted decorative bracket light fitting with having stainless steel rust free fixture with white glass diffuser alongwith bulb holder based adhaptor suitable used for 7.5W / 9 W LED filament lamp E27 base system including providing of 1N x 9W LED lamp in required fitting use in both warm/white type colour complete light fitting set and including providing of suitable type of flate fexible two/three core cable and making electric connection, complete all as specified and directed. |
| 79 | Supply and fixing surface mounted LED decorative type angle adjustable sport light / bed side study lamp light fitting with lamp in matt finish for premium aesthetics with based of suitable rating capacity 7Watt to 10 Watt LED fixture in required fitting use in both warm/white type colour complete light fitting set and including providing of suitable type of flate fexible two/three core cable and making electric connection complete all as specified and directed. |
| 80 | Supply and fixing of LED street light fitting of rated capacity 35Watt 230 volt AC with having LED driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optices complete with IP 65/66 protectiuon suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete light fitting set including providing of suitable dia of GI bracket and it to as per match/setting thefitting fixture base hole attechment system and including providing of suitable type of flate fexible two/three core cable and makong electric connection all as specified and directed. |
| 81 | S & F in repair Surface mounted LED bulk head luminiries light fitting of rated capacity 10W including LED lamp & driver suitable used for out door type with dust and water proof with energy efficient complete and including providing of suitable type of flat flexible two/three core cable and making electric connection complete all as specified and directed. |
| 82 | Supply and fixing recessed/ceiling concealed/ Surface mounted down lighter light fitting of round/Square flate shapes decorative type with high efficiency PMMA fiffuser soft glare free light with drivers & LED luminaire of rating capacity in 15Watt to 18Watt 220 volt AC complete light fitting set all as per existing fitting type/ size of sample /model and make and including making in cutting or additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flate fexible two/three core cable and makong electric connection and including taking down of old fitting all as specified and directed. |
| 83 | Supply fixing and comissioning and testing of star rated of electric ventilation exhaust fan of size 200 mm sweep complete AC single phase 230 volt and made out of sturdy engineering plastic body complete with blade and louvers with shutter and also providing or making of suitable type/size of hole on wall out of any type of wall constraction work for installation /fixing of exhaust fan after fan fixing work making good to all diturbed hole surface area of wall/ceiling and floor area of hole system and to match/dressing to it as per the existing surface os wall/floor/ceiling etc by cement plastering work complete all as specified and directed |
| 84 | Taking down existing 1200 mm sweep ceiling fan from ceiling including disconnecting wiring, dismantling complete fan body, supplying and fixing new fan body/casing with necessary screws, nuts, bolts, down rod, shackle, canopy & rewinding motar etc. including re-assembly of existing motor and blades, connection, testing, commissioning and refixing at original position complete as required and as directed. |
| 85 | S & F Storage type Water heater (Geyser) 5 STAR of Cap 25 Ltrs working on 230 volts AC supply with in and out going water connection pipe (Hot & Cold) fixing arrangement with nut bolts and making good the disturbed surface, complete all as specified and as directed. |
| 86 | Supply and fixing of sheet metal enclosure duly powder coated with double pole and neural enclosure with a two pin and earth plug and top and having mounting chanel and complete with one 01 MCB SP 20 Amp and making all necessary electrical connection and dully fixed surface on wall or concealed on wall and making good the disturbed wall surface all as required at site or directed . |
| 87 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type for vertical type distribution board vertical loadline type of rating VTPN 4 way type 415 volt 3 phase AC supply holding system with IP protection rating with ISI marked and having fitted neutral and earth link bus bar and mounting base chanels and blanking plates suitable for holding of main MCCB as incommer and out going MCB complete system alongwith providing and mounting in side of DB box of 01 No of MCCB TP 160 Amps with breaking rupting capacity 25 KA and having adjustable setting type and also providing of 08 Nos of MCB SP 63 Amps 10KA 'C' curve type of the same manufacture make as per of distribution board make complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs complete all as specified and directed. |
| 88 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 8 way type 220 volt AC supply system and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs complete all as specified and directed |
| 89 | Supply and fixing of MCB SPN 40 to 63 Amps, 230 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity, complete all as specified and directed |
| 90 | S&F MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity, complete all as specified and directed |
| 91 | Supply and fixing of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 2 Run of 6 Sqmm and 1 Run of 6 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system complete and making good all disturbed surfaces match to the existing surface complete all as specified and directed.Note: 3 runs of 6 sqmm cable and one run of conduit/ casing capping shall be measured and paid as one unit. |
| 92 | Supply and fixing of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 2 Run of 4Sqmm and 1 Run of 4 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system complete and making good all disturbed surfaces match to the existing surface complete all as specified and directed.Note: 3 runs of 6 sqmm cable and one run of conduit/ casing capping shall be measured and paid as one unit. |
| 93 | Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade cross sectional area of size 25 sqmm 3.5 core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size complete all as specified and directed. |
| 94 | Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and getting out, complete all as specified and directed. |
| 95 | Returing, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer, compete all as specified and directed. |
| 96 | Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 97 | Material and labour for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified. |
| 98 | Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other, complete all as specified and directed. |
| 99 | M&L for earthing work complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers of galvanised steel and to be protected by GI pipe 15 mm bore light grade & connected to earth test point/main switch board or main control board and also providing charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil all as shown in Electrical Plate No 3 of SSR part -I. and also making arrangment of 20 mm dia bore galvanised iron pipe (medium grade) for water and making funnel, wire mesh,and also including provision of concrete pit cover framing work in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and outer frame work of angle iron 25x25x6mm with top concrete pit cover and handle for lifting of cover, complete work all as specified and directed . |
| 100 | Supply and fixing of rigid non metalic PVC conduit of size 20/25 mm bore heavy duty with all fitting laid in trenches/ wall including providing clamping arrangment for holding of pipe on wall in proper size of clamps, nut bolt ,and washer etc complete all as specified.and directed |
| 101 | Supply and fixing of GI earth countinuity earthing lead of size 4 mm dia bore galvanised iron or steel wire with all fitting dully laid in trenches/ wall including providing clamping arrangment for holding on wall in proper size of clamps, nut bolt ,and washer etc complete all as specified.and directed |
| 102 | Notes :-An amount of Rs 57,574.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender