Tender For Addition Alteration To Certain Md Accommodation Of Airmen And Civilian At Af Station Under Ge (Af) Jamnagar No.2
Tender Value
42.50 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
7 days left
EMD
85000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Certain Md Accommodation Of Airmen And Civilian At Af Station Under Ge (Af) Jamnagar No.2
BOQ
| Sl. No. | Item Description |
| 1 | M&L for complete removal of existing unserviceable water proofing treatment from top of roof and canopies/chajjas of building including removal of debris out side MD land and providing screed bed of 10 to 15mm avg thick in CM 1:4 for laying floor finish, mixed with WPC @3% by weight of cement on fair faces of concrete surfaces without using extra cement as in roof and further apply water proofing treatment to slab area with smartcare APP membrane 3.00 mm thick polyester modified preformed membrane mineral finish with the help of torching with side overlap of 100mm to be done over one coat of smartcare bitumen primer apllied with brush/roller laying achieving a forced coverage of 4 sqmt/ltr as per manufacturer's instructions complete all as specified and directed.Note:- WPC shall be measured & paid separately. |
| 2 | M & L for providing plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) of average thickness 40 to 50mm in adequate slope on roof surfaces for padding to achieve the 1:40 slope including demolition of existing PCC padding of any description and thickness etc complete all as specified and directed. |
| 3 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 4 | Complete removal of existing treatment of old surface including brooming down, scrapping down smoke soot, mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying two coats of Acrylic emulsion (exterior whether coat) paint of any tint as approved complete all as specified and directed. |
| 5 | Taking down cement plaster on brick or concrete or stone walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 6 | M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished fair and even etc complete all as specified and directed. |
| 8 | M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and directed. |
| 9 | M&L for preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer complete all as specified and directed. |
| 10 | M&L for preparation of new undecorated surface of wall and applying two coats of cement base paint complete all as specified and directed. |
| 11 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 12 | Supply and fix in repairs 10 Litre capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float, handle, flush pipe 32 mm , PVC connection 450 mm fixed in position and connecting complete all as specified and directed. |
| 13 | S&F in repairs white vitreous china wash down water closet (pedestal pattern) with fixing bolt, with plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connections complete all as specified and directed. |
| 14 | S&F in repair white vitreous china wash hand basin of size 550 x 400 mm, fixed over & including MS brackets comprising of the following items:- (a) Waste fitting 32 mm dia brass chromium plated with long screwed shanks and fly nut, flange end, bedded in red lead cement and other end fixed complete. (b) 15 mm size Pillar tap fancy typev cast copper alloy with capstan head, chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nut screwed for iron pipe complete. (c) LDPE/PVC waste pipe 32 mm dia 1000 mm long complete. |
| 15 | S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 16 | S&F in repairs Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm - 45gms) for 32 mm discharge pipe complete all as specified and directed. |
| 17 | S&F in repairs Waste coupling of PTMT (half or full threaded) (Minimum weight - 60 gms) for 40 mm discharge pipe complete all as specified and directed. |
| 18 | S&F in repairs 15mm bore wall mixer 3 in 1 system with provision for overhead shower system complete all as specified and directed. |
| 19 | S&F in repair 15 mm size bib cock short body cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed. |
| 20 | S&F in repair 15 mm size bib cock long body cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed. |
| 21 | S & F in repairs 15 mm size CP pillar cock long nose cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 22 | S&F in repair 15 mm size stop cock, cast copper alloy, chromium plated with long shank, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed. |
| 23 | S&F in repair 15 mm size angle cock/concealed stop cock, cast copper alloy, chromium plated with long shank, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed. |
| 24 | S& F in repairs brass chromium plated overhead shower 125 mm size with 225 mm arm and flange for 15 mm inlet pipe complete all as specified and directed. |
| 25 | S&F in repair stainless steel sink with draining board for kitchen or laboratory, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete including waste coupling, waste pipe complete all as specified and directed. |
| 26 | S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule and fixed 25mm dia all complete all as specified and directed. |
| 27 | S&F in repair 450 mm long PVC connections 15 mm size with PTMT nuts at both end complete all as specified and directed. |
| 28 | Supply and fix 15 mm outer dia CPVC pipes SDR 11 & plain CPVC SER 11 fittings, fixed on wall concealed or exposed / ceiling or laying in floors including taking down of existing GI water tubing of 15mm dia etc complete all as specified.Note:- Cutting chease wherever required will be measured & paid separately. |
| 29 | Supply and fix 20 mm outer dia CPVC pipes SDR 11 & plain CPVC SER 11 fittings, fixed on wall concelled or exposed / ceiling or laying in floors including taking down of existing GI / PPR water tubing of 20mm dia etc complete all as specified.Note:- Cutting chease wherever required will be measured & paid separately. |
| 30 | Supply and laying in repair of GI 25 mm tubes, medium grade, galvanised, with all fitting; laid in trenches fittings on walls concealed type in any type of masnory or laying in floors complete all as specified and directed. |
| 31 | M&L for cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in cement mortar 1:3 complete all as specified and directed. |
| 32 | S&F in repair PVC (SWR) pipes 75 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, fixed to walls complete all as specified and directed. |
| 33 | S&F in repair PVC (SWR) pipes 75 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, laid in trenches or in floors complete all as specified and directed. |
| 34 | S&F in repair PVC (SWR) pipes 110 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, fixed to walls complete all as specified and directed. |
| 35 | S&F in repair PVC (SWR) pipes 110 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, laid in trenches or in floors complete all as specified and directed. |
| 36 | S&F in repair PVC (SWR) bends 110 mm dia complete all as specified and directed. |
| 37 | S&F in repair PVC (SWR) bends 75 mm dia complete all as specified and directed. |
| 38 | S&F in repair PVC (SWR) vent cowl 110 mm dia complete all as specified and directed. |
| 39 | S&F in repair PVC (SWR) vent cowl 75 mm dia complete all as specified and directed. |
| 40 | S&F in repair PVC floor trap 75 mm dia of outlet, with grating including jointing with solvent cement complete all as specified and directed. |
| 41 | S&F in repair PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed. |
| 42 | S&F in repair SS Grating of size 150 mm x 150 mm fixed with white or grey cement complete all as specified. |
| 43 | S&F in repair 32 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2, fixed as in spout pipe and making good disturbed surface in CM 1:3 complete all as specified and directed. |
| 44 | M&L for cutting holes into or through stone/PCC block wall built cm. and making good in cm 1:3 or PCC type B-1 on required Superficial area n exc 150 sq.cm all as specified . |
| 45 | Demolition of concrete surfaces in ground floor and paving n.exc. 15cm thickness (below or above ground level) and removing the same to a distance of 1.5 KM including loading and dumping/ levelling at the destination all as Specified. |
| 46 | M&L 75mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded aggregate) as in plinth potection including finished the surface even and smooth without using of extra cement and complete all as directed. |
| 47 | S&F in repair 600 mm x 450 mm x 5 mm thick mirror selected quality, mounted on 4-5 mm thick water proof plywood (BWP grade), with aluminium angle beading all around, fixed on wall with nylon sleeve & cadmium plated screws complete all as specified and directed. |
| 48 | Demolition of concrete of any description and in sunken portion not otherwise specifically provided for complete all as specified and directed. |
| 49 | M & L for cement concrete type E2 1:5:10 (40mm graded aggregate) in sunken portion complete all as specified and directed. |
| 50 | M& L for preparation sunken surfaces by cleaning of and removal of loose concrete and filling cracks with polymer modified mortar using Dr fixit Pidicrete URP or equilvalent in forsoc and other approved make and applying 2 coat of Dr fixit Bath seal WPC in sunken area and laying a protective plaster in 10mm thickness in cement mortar (1:3) admixtured with Dr fixit Pidicrete LW+ @ 220 ml per bag of cement applying mix of cement water in ratio 1:1.5 by volume using DR FIXIT PIDICRETE URP chemical on floor and vertical surface of sunken floor as per manufacturers instructions complete all as specified and directed.Note: Liquid water proofing compound to be paid and measure separately. |
| 51 | Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to outside MOD land complete all as specified and directed. |
| 52 | M & L for 25 mm thick cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in levelling course complete all as specified and directed. |
| 53 | M&L for non - skid joint free coloured Ceramic tiles (1st quality) not less than 7mm thick tiles of size exc 0.11 sqm but n exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed. |
| 54 | M&L for non - skid joint free coloured Ceramic tiles (1st quality) not less than 7 to 8 mm thick tiles of size exc 0.18 sqm but n exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed. |
| 55 | M&L for glazed ceramic tiles in vertical surface 300 x 450 x 7-8mm/ 450 x 350 x 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat of mortar in CM 1:4 for laying wall tiles finishes complete all as specified and directed. |
| 56 | Dismantling of kota stone slabs and granite tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or plateform etc complete all as specified and directed. |
| 57 | M&L for Granite work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade complete all as specified and directed. |
| 58 | M & L for machine cut & machine polished kota stone slab 18 to 20 mm thick as in kitchen plateform, treads of steps laid over and including 15 mm thick screed bed in CM 1:6, jointed with grey cement slurry mixed with colour pigment to match the shade of the slab, rubbing and polishing complete all as specified and directed. |
| 59 | 18-20 mm thick machine cut kota stone slab in riser of steps, skirting, dado and pillar laid over cement mortar in 1:4 base laid and jointed with grewy cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 60 | M&L for rounding to edges of Granite/ Kota stone slabs edge, such as in steps cooking plateform, and other similar situation. |
| 61 | S&F in repair health fauset (Hand shower) with 8mm dia 1 metre long easy flex tube and in chorme finish & wall hook all as specified and as directed. |
| 62 | S&F in repair SS Soap dish fixed with stainless screw complete all as specified and directed. |
| 63 | S&F in repair stainless steel kitchen plate rack of size 31\\" x 24\\" x 10\\" deep, fabricated with 0.63 mm sheet fixed in position on wall complete all as specified and directed. |
| 64 | S&F in repair waste pipe of PVC 31/32 mm x 800mm long, complete all as specified and directed. |
| 65 | S&F in repairs corner glass self 12 inch including bracket etc complete all as specified and directed. |
| 66 | Demolition of brick work / stone work / PCC block masonry built in Cement mortar complete all as specified and directed. |
| 67 | M & L for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:4 type C1 (1:5:8) (using 20mm graded stone aggreagate), complete all as specified and directed. |
| 68 | S& F in repairs 18/19 mm thick plywood (12 Nos of ply) grade BWR, type BB fixed width screws to timber frme work or plywood complete all as specified and directed. |
| 69 | M & L for 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 70 | S&F in repair magnatic catcher and connected plate to shutters and frame as per sample. |
| 71 | S & F in repair drawer handles, projection drop (50mm to 65mm) on screwed plate complete all as specified and directed. |
| 72 | S & F in repairs for mild steel butt hinges, medium grade 75mm size complete all as specified and directed. |
| 73 | Supply fabricate & fix in position anodised aluminium powder coated (minimumthickness of powder coating 50 micron) three track window ( two shutters glazed ) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in Member for wire gauge Section shall be 18.00 x 25.00 x 1.35 (Section No 20791). position, concelled type lock for all two shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed. (a) Frame (top & side) section shall be of size 92.00 x 31.75 x 1.50 mm (Section No 20831) (b) Frame (bottom) section shall be of size 92.00 x 31.75 x 1.50 mm (Section No 20832) (c) Top & side Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20736) Note:- Section No given above are of make Jidal, Contractor may use similar section of other make mention in Appx B. |
| 74 | M & L for Powder coated Aluminium ventilators any colour (thickness of powder coating not less than 50 micron) anodised aluminium partitions, with using aluminium section weighing 0.55kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, sliding chanel witth roller, anodized aluminium snap beading screws etc inculding frosted glass 4 mm thick and fixed with wall including taking down old ventilators complete all as specified and directed. |
| 75 | M & L for framed work such as grills, gratings, other section etc. with ends of bars houldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 76 | M&L for preparation of new surfaces of steel exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 77 | Taking down chowkats or frame with shutter (with out taking off shutter from the frame) n.exc 1.5 Sqm complete all as specified and directed. |
| 78 | Taking down chowkats or frame with shutter (with out taking off shutter from the frame) .exc 1.5 Sqm and n. exc 4.0 sqm area of each complete all as specified and directed. |
| 79 | Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each |
| 80 | S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 81 | S & F 35 mm thick II class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered orrounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified . |
| 82 | S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete allas specified. |
| 83 | S & F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and directed. |
| 84 | S & F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent coment for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, including stainless steel butt hinges 100 mm long, Aluminium tower bolt tower bolt 100 mm long and Aluminium handle 150 mm long as per specification and complete all as specified and directed. |
| 85 | S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 86 | M & L for 100mm long Butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and directed. |
| 87 | S&F 150mm long aluminium anodised barrel tower bolt complete all as specified and directed. |
| 88 | S&F 150mm long aluminium handle fabricated type anodised complete all as specified and directed. |
| 89 | S&F 300mm x 16mm dia aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of steel cast or extruded section or cast aluminium alloy complete all as specified and directed. |
| 90 | S & F 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 91 | S&F 300 mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 92 | Forming jambs, etc. to openings (to foregoing item), in Cement mortar 1:6 including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed. |
| 93 | M&L for preparing sufaces of new, previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and priming with pink primer and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 94 | M&L for chipping / dismantling of loose damaged concrete removed carefully by using mechanical concrete upto good parent concrete to expose the existing reinforcement (direct hammering should be avoided) average thickness of chipping average 20 -70 mm alround lintel / beams / column upto 10 mtr height including scffolding complete all as specified and directed. |
| 95 | Supplying and application of rust remover/converter (rebaklense RR of M/S fosroc chemicals India ltd or or equivalent as approved) over the corroded reinforcement bar where ever/Polymer modified mortar micro concreting is required and cleaning the same after application incl cost of all materials, rent of tools, scaffolding, cost of brushes etc. upto 10 mtr height complete all as specified and directed. Please Enable Macros to View BoQ information |
| 96 | Supplying and application of rust remover/converter (rebaklense RR of M/S fosroc chemicals India ltd or or equivalent as approved) over the corroded reinforcement bar where ever/Polymer modified mortar micro concreting is required and cleaning the same after application incl cost of all materials, rent of tools, scaffolding, cost of brushes etc. upto 10 mtr height complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender