Tender For Addition Alteration To Building No 21 At Transit C Under Ge (North) Delhi Cantt-10
Tender Value
42.55 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
15 days left
EMD
85500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Building No 21 At Transit C Under Ge (North) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down old unserviceable point wiring from existing conduit (light fan, socket or powder) complete such as switches, ceiling rose, pendent regulated and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc complete |
| 2 | M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLSH copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and factory made modular flush sheet galvanised metal sunken box having sheet thickness not less than 1.2 mm with zinc coating not less than 120 GSM with top, bottom, side and back wall knockouts for conduit entry from any direction, modular white cover plate with frame, blanking plate etc suitable for up to required module etc complete and making good to the disturbed surfaces to match the existing complete all as specified and directed for the following :- |
| 3 | One light point controlled by one, one way switch |
| 4 | One ceiling/ exhaust fan point controlled by one, one way switch |
| 5 | One bell point controlled by one, one bell push |
| 6 | One socket outet point 5 amps on the independent board |
| 7 | One socket outet point 5 amps on the same board |
| 8 | All as per the description of srl Item No 02 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed. |
| 9 | S&F modular switch, 06 Amps, single pole, one way, 230 volts, one module and IP 20 protection complete |
| 10 | S&F modular bell push with indicator, 06 Amps, single pole, one way, 230 volts complete |
| 11 | S&F modular socket outlet 03 Pin, 06 Amps, 02 module with shutter complete |
| 12 | S&F modular switch, with indicator, 16 Amps, single pole, one way, 230 volts complete |
| 13 | S&F modular socket outlet 02 in 01, 03 pin, 16 Amps, 02 module with shutter complete |
| 14 | S&F ceiling rose surface type bakelite 65x50mm three terminal complete |
| 15 | S&F modular ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, humfree, AC, 230 volts, socket type, 100 watts, ISI marked complete |
| 16 | S&F bell, ding dong type, AC, 230 V, single pole |
| 17 | S&F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete. |
| 18 | S&F in repair surface/wall mounting LED Inverter Type batten luminaire with following specifications :-(a) System Power : 10W(b) Length : 2ft(c) Housing : Epoxy powder coated white extruded aluminium channel(d) Diffuser : Milky white Polycarbonate(e) Rated Voltage : 240V(f) Safe operating Voltage : 140V to 270V(g) Rated Frequecy : 50 Hz(h) Power Factor : ≥ 0.95(j) THD : ≤ 10(k) Operating Temp : - 10 deg C to + 45 deg C(l) Lumen Efficacy of LED : ≥ 120 Lm/W(m) System Luminous Efficacy : ≥ 100 Lm/W(n) CRI : ≥ 80 (o) CCT : 5700K(p) Driver : Integral SMPS based constant current type with short circuit , surge voltage protection upto 2.5 KV. (r) IP rating : 20(s) IK rating : 03(t) Battery (Li-Ion type, Minimum Nominal Capcity:5200mAh, Minimum Backup: 02 Hrs) complete. |
| 19 | S&F in repair decorative wall mounting light SS finish fixture with extruded glass difuser suitable for up to 40 watt mini glass lamp, lamp holder, including 9 Watts LED bulb having minimum efficiacy at level >=100 lumens/watt, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 4 KV, CCT 4000-5700K with same lumens/w CRI>80, PF>0.95, THD<10%@ operating voltage 170V-240V for fixing in decorative wall mounting light and all accessories pre-wired including connecting up including taking down of existing u/s light fitting complete |
| 20 | S&F in repair surface mounting LED integrated PVC housing batten luminaire with PC diffuser 20 W, 4 feet fixture should have minimum efficiency at level >=120lumens/watt, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, THD<10%@240V AC, an operating voltage range of 140-270V and all accessories pre-wired including connecting up with copper conductor wire of suitable size with connector block complete. |
| 21 | S&F in repair Wall-mounted mirrors with built-in lights (LED mirrors), light source : typically energy-efficient LED strips is embedded directly into the mirror (backlit) & shadow-free lighting complete all as specified and as directed by Engr-In-Charge. |
| 22 | S&F wall mounted fan of 400 mm sweep, 230 volts, AC, 50 Hz capacity, including all arrangements for mounting of fan including connecting up with provision of PVC insulated flexible twisted type copper conductor cable 1.5 Sqmm, 2 core as required for connections complete all as specified and as directed. |
| 23 | S&F(in replacement) sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 12 way, with 100 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing surface complete |
| 24 | Supply & fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 230 volts of 20 Amps, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. |
| 25 | S&F (in replacement) MCB SP, AC, 240 volts of 06 to 32 Amps capacity \\"B\\" curve, 10 KA incl connections using copper lugs complete |
| 26 | S&F (in replacement) MCB, SPN, AC, 230 volts of 40 Amps capacity \\"C\\" curve, 10 KA breaking capacity and making connections by using copper lugs complete |
| 27 | M&L for sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified & directed, including taking down old sub main wiring. Note:- Two run for neutral and phase and one run for continuous earth wire shall be measured as one run for payment purpose) |
| 28 | M&L (in replacement) submain wiring with 2 run of 6 Sqmm (nominal area) FRLS PVC insulated, unsheathed and stranded copper conductor cable ISI marked drawn in to PVC conduit with and including independent 6 Sqmm (nominal area) FRLS PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB complete.(Note : Two run for neutral and phase and one run for continuous earth wire shall be measured as one run for payment purpose) |
| 29 | M&L (in replacement) for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick directly buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below the ground level connected to GI strip 25 x 4 mm by means of bolts nuts check nuts and washers of galvanised iron at 2 points & GI pipe 40 mm bore light grade for protection of earthing wire PCC chamber 1:3:6 (type C-1) using 20mm graded stone aggregate, watering pipe 20mm bore light grade, funnel with wire mesh, 50 mm thick cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8 mm MS bars at 150 mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR part-I and including excavation & earth work & connecting the earthing point/equipment and testing complete |
| 30 | S&F (in replacement) sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 415 volts, 04 ways with 200 Amps rated copper bus bar and metal double door suitable for MCCB 125 amps as incomer and MCB SP as outgoing along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete Note:- MCCB & MCB SP will be measured seperately) |
| 31 | S&F(in replacement) MCCB 125 amps, 4 Pole, 415 volt, AC, fixed type, with breaking capacity 16 KA suitable for load line/ VTPN DB & connection complete |
| 32 | Taking down & refixing of carefully any size/type ceiling/Exhaust fan & Geyser and making good the disturbed surface of wall / floor/ ceiling etc complete including all as directed. |
| 33 | Supply, Installation, commissioning and testing of Inverter Technology Hot & Cold Split Type wall mounted Air Conditioner (indoor & outdoor unit with cordless remote control unit) of Capacity not less than 2.0 TR, minimum BEE 3 Star rating, fitted with rotary compressor, Refrigerant type R-410A/R-32, Rated cooling capacity rated (6450/7033 Watts) including PVC FRLS grade multi stranded copper conductor cable 4 core 2.5 Sqmm for connections with outdoor unit complete all as specified and directed. (Make:- Latest Model of Daikin/Voltas/Hitachi/Blue Star. |
| 34 | Supply, Installation, testing and Commissioning of voltage stabilizer for automatic operation single phase, wall mounted ,Copper wounded, Air cooled with digital display designed for input variation between 160 Volt to 260 Volt with output voltage 220 + 9% Volt with Calibration accuracy + 3% with high low cutoff, Intelligent time delay facility and of capacity 5.0 KVA. Make-Microtek/Volina/Sinetrac/Blue Bird” |
| 35 | Supply & fixing heavy duty copper pipe of size 15mm (5/8\\") dia/ bore complete including insulation brazing, welding, nuts, bolts and screws of required size complete all as specified and directed by Engr-in-Charge. (Make:- DIAMOND/ STAR/ MALASIA/ CAMPIRO) |
| 36 | Supply & fixing heavy duty copper pipe of size 10mm (3/8\\") dia/ bore complete including insulation brazing, welding, nuts, bolts and screws of required size complete all as specified and directed by Engr-in-Charge. (Make:- DIAMOND/ STAR/ MALASIA/ CAMPIRO) |
| 37 | S&F 'L' type stand for mounting outdoor unit of Air conditioner with nuts, bolts and washer complete all as specified and directed. |
| 38 | S&F PVC drain pipes of suitable size 25 mm dia with clamp fixing in wall/roof complete all as specified and directed by Engr-in-Charge. |
| 39 | Supply, Installation, testing and commissioning of Deep Freezer having hard top double door with locking arrangement, electric driven (single phase, 230 V,50 Hz AC supply), not less than 320 Ltrs (Gross Volume) with temperature range (-18°C) working with Non CFC refrigerant, energy efficient compressor, puff insulation, heavy duty castor wheels and complete all as specified and directed, Make-Voltas/Blue Star/LG. |
| 40 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, all as specified. |
| 41 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. |
| 42 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n. exc. 0.18 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement over and including15mm thick screed/bedding layer in CM (1:6), complete all as specified and directed. |
| 43 | M&L for glazed coloured ceramic tiles of size 600x300x7mm thick on vertical surfaces such as skilting/dado over 10mm thick rendering in CM (1:4), complete all as specified and directed. |
| 44 | Surface excavation n exc 30 cm deep and averaging 15 cm deep getting out in soft/loose soil complete all as specified and directed. |
| 45 | Removing excavated materials to a distance exc 250 m but not exc 500m outside defence land and depositing where directed. |
| 46 | M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken stone ® |
| 47 | M&L Cement concrete type C2 1:3:6 (40 mm graded stone aggregate) as in sub base, 75 mm thick finished even and smooth without using extra cement complete all as specified and directed. |
| 48 | M&L 50mm thick Sand Cushioning for paver block tiles over subbase all as spd and directed |
| 49 | S&F Machine pressed precast rubber moulded concrete interlocking paver block of 60 mm approved pattern shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Gradeall as directed at site. |
| 50 | M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete all as specified |
| 51 | M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified. |
| 52 | Roughening surfaces of old concrete floor by picking sweping clean and washing down with water to remove dust etc. complete all as specified. |
| 53 | S&F 15 mm dia GI tubing medium grade with all fitting and fixed to wall and ceiling or laid in floors etc as in horizontal or vertical surfaces complete, all as specified. |
| 54 | S&F in repairs vitreous China coloured European type WC with \\"P\\" or \\"S\\" trap for 100 mm bore , including connection to drain and to flushing cistern with pipe 32mm dia PVC pipe and fixing bolts complete all as specified . |
| 55 | S&F in repairs vitreous chinaware coloured wash hand basin of size 580mm x 450mm complete including , CP Waste coupling , PVC waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Engr in charge |
| 56 | S&F in repair plastic water closet seat cover/white closed pattern with flat bottom and cover and mild steel C hinges as per ISI complete all as specified. |
| 57 | S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, fixing with gitties embeded in wall with drilling machine etc complete all as specified. |
| 58 | S&F in repairs bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified |
| 59 | S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified |
| 60 | S&F in repair PVC connection pipe of 1/2\\"x18\\" size with 2 Nos brass check nuts with washers, complete all as specified. |
| 61 | S&F in repair Health faucet, CP brass with 1.50m long flexible pipe all as specified and as directed |
| 62 | S&F in repair fancy type 150mm size square brass CP shower rose with long arm all as specified. |
| 63 | S&F in repair CP grating 125mm dia, complete all as specified. |
| 64 | S&F in repairs fancy type looking mirror of size 600 x 450 x 6mm with 100 mm wide fancy type border fixed with 4 Nos stainless steel clips complete all as specified |
| 65 | S&F in repair Glass Corner Shelf 8mm thick including CP railing radius 250mm complete all as specified and directed. |
| 66 | S&F in repairs Glass shelf assembly 450mm long 150mm wide with cp railing complete all as specified and as directed. |
| 67 | S&F in repairs 15 mm dia Brass CP three-in-one wall mixer for mixing hot & cold with L bend water screwed down for iron pipe and fixed complete all as spd . |
| 68 | S&F in repairs 15 mm dia Brass CP WHB Mixer for mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified |
| 69 | S&F in repair polythylene of low or high density or PVC, 32mm /40mm dia waste flexible pipe 750mm long. |
| 70 | S&F in repair brass chromium plated toilet paper holder, complete all as specified. |
| 71 | S&F in repair chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified |
| 72 | S&F in repair brass chromium plated soap dish, complete all as specified. |
| 73 | S&F in repairs 1000 ltrs capacity three layer rotational molded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted of and fixed in position including, dismantling existing water tanks etc all as specified and directed. |
| 74 | M&L for ready mix plaster of 15mm thick on brick or conc surfaces incl necessary cement slurry with bulk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer instruction.Inc. two coat of white wash lime |
| 75 | S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe 410 W ( Gde 250 quality A) incl demolition of existing items all as specified and directed. |
| 76 | Supply and fix pre painted galvalume aluminum ZINC coating GI base corrugated steel 0.5mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screw with minimum 150mm end lap and one corrugation side lap including dismantling the existing sheets complete all as specified and directed. |
| 77 | S&F in repair Vitreous China urinals 900 X 450 MM full stall type white urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; Sencer flusing operator |
| 78 | M&L Brass chromium plated bottle traps for wash basins and urinal with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed |
| 79 | S&F factory made uPVC any colour fixed glazed window/ventilator made of ( small series) frame 47 x 50mm mullion 47 x 68mm both having wall thickness of 1.9 + 0.20mm and single glazing bead of appropriate dimension ( Area upto 0.75 sqmtr) comprising of uPVC multichambered frame and mullion (wherevr required) extruded profile duly reinforced with 1.60 +0.20mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropraiate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless screw etc.Profile of frame shall be miterd cut and fusion welded at all corners, mullion (if reqd) shall be also fusion welded including 5mm thick toughened glass drilling holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of reqd size and approval quality, all complete as per approved drg and direction of Engr in charge. Note: For uPVC frame, sash and mullion extruded profiles ,minus 5% tolerance in dimension i.e depth and width of profile dimension in higher side shall be acceptable but no extra payment on this account shall be made Make : Fenesta /AIS / Okotech |
| 80 | Taking down Wall panelling and similar work as specified as diracted.. |
| 81 | S&F Solid WPC Wall Lining consisting of 12mm thick Single Side Prelam colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing |
| 82 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid prelaminated design flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, make : Fenesta/ Oko Teck/ Alstomie all as per direction of Engineer-In-Charge.Note:- stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified. |
| 83 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note:- For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete.all as specified and directed. |
| 84 | Taking down/dismantling old particle board or any board kitchen cabinet with wardrobe including fillets and making good disturbed surfaces all assessary complete all as specified. |
| 85 | S&F in repair 18/19 mm thick WPC Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard, bathroom cabinet etc all as specified and directed |
| 86 | M&L for 18 to 20 mm thick Black Granite stone work (table rubbed and polished) over and including15mm thick Screed bed or bedding layer in CM 1:4, as in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab moulded and polished including dismantling the existing stone slab with screed/ backing and removal of debries out side the MOD Land complete all as specified and as directed by the Engineer-in-Charge.Note:- The cost of making hole for Gas pipe in cooking plateform is included in unit cost of item and nothing extra shall be paid on this account. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender