Tender For Repairs To Certain B/R & Electrical And Mechanical Works At No 1,2,3 & 4 Bn At Nda Khadakwasla
Tender Value
30 Lakhs
Estimated cost
Bid Submission
05 Sep 2026
12 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairs To Certain B/R & Electrical And Mechanical Works At No 1,2,3 & 4 Bn At Nda Khadakwasla
BOQ
| Sl. No. | Item Description |
| 1 | M&L for cutting holes in brick wall/ stone wall/ PCC block walls for inserting holdfast etc depth of embedded portion of holdfasts or cutting lugs measured from the face of the jamb into the wall exceeding one brick but not exceeding two brick thick in girth and making good disturbed portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1, complete all as specified and as directed . |
| 2 | M&L 16-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, counter basins and like laid over and including screed bed 15 mm thick in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and complete all as specified and directed. (Note:- Granite to be used in treads shall be one piece with nosing at front and cutting two grooves alongwith nosing. Colour shall be of Lakha red, flamed granite or telephonic black as approved.) |
| 3 | M&L 16 mm thick granite both side polished for urinal partition/ vertical surfaces etc in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and complete all as specified and directed. |
| 4 | M& L for second class hard wood in exc 40 Sq cm in area or over in section in unframed work complete all as specified and directed. |
| 5 | S & F in repairs 2nd class Hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails sectional area exc. 3 sq cm but n.exc 6 Sq cm complete all as specified and directed. |
| 6 | S & F in repairs Second class hard wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 6 Sq. cm and not exceeding 13 Sq. Cm complete all as specified and directed. |
| 7 | S&F in repair 20mm thick 2nd class hardwood clean sawn boards or planks, width n exc. 25 cm complete all as specified and directed. |
| 8 | S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement complete all as specified and directed. |
| 9 | S & F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-1, section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 10 | S&F 35 mm thick Ist class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), supplied and fitted to chowkats complete all as specified and directed. |
| 11 | S&F 35 mm thick flush door shutters solid core construction, with MDF and plywood face panels, commercial type on both side and covered on both sides with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 12 | Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 13 | Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 14 | Resecuring or easing & adjusting and refixing in same opening including taking down shutters if necessary and fill the gap, hole, or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door necessary grinding, sanding for getting smooth surface, repair/replacement of damaged rail/panel of any description n.exc 2 sqm each . Note : (i) Rate deemed to be inclusive of 1st class hardwood plain panel, style, rail required to be replaced of size matching wih existing and making the surface good by necessary polishing/painting/ oiling (ii) The rates for necessary scaffolding required shall be deemed to be included. |
| 15 | Taking down shutters of any description not exceeding 1.0 Sqm each complete all as specified and directed. |
| 16 | Resecuring or easing and adjusting without taking down shutters of any description not exceeding not exc 1 sqm each leaf complete all as specified and directed. |
| 17 | Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed. |
| 18 | S&F in repairs Brass barrel tower bolt, heavy 600mm long, with cast or sheet barrel and rolled or cast bolts and fixed etc complete all as specified and as directed . |
| 19 | S&F Brass barrel tower bolt, heavy 600mm long, with cast or sheet barrel and rolled or cast bolts and fixed etc complete all as specified and as directed . |
| 20 | S&F in repairs Brass barrel tower bolt, heavy 450mm long, with cast or sheet barrel and rolled or cast bolts and fixed etc complete all as specified and as directed . |
| 21 | S&F Brass barrel tower bolt, heavy 450mm long, with cast or sheet barrel and rolled or cast bolts and fixed etc complete all as specified and as directed . |
| 22 | S&F in repairs 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed. |
| 23 | S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed. |
| 24 | S&F in repairs 250 mm long stainless steel sliding door bolt, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 25 | S&F 250 mm long mild steel sliding door bolt, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 26 | S&F Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed - length of bolt – 250 mm complete all as specified and directed. |
| 27 | S&F in repairs Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed - length of bolt – 250 mm complete all as specified and directed. |
| 28 | S&F Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed - length of bolt - 300 mm complete all as specified and directed. |
| 29 | S&F in repairs Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed - length of bolt - 300 mm complete all as specified and directed. |
| 30 | S & F 125 mm Stainless steel Butt hinges, heavy weight, cold rolled with screws complete all as specified and directed. |
| 31 | S & F in repairs 125 mm Stainless steel Butt hinges, heavy weight, cold rolled with screws complete all as specified and directed. |
| 32 | S & F 100 mm Stainless steel Butt hinges, heavy weight, cold rolled with screws complete all as specified and directed. |
| 33 | S & F in repairs 100 mm Stainless steel Butt hinges, heavy weight, cold rolled with screws complete all as specified and directed. |
| 34 | S & F 175 mm long extruded brass plate handles, fabricated type, polished bright fancy type fixed with brass screws complete all as specified and directed. |
| 35 | S & F in repairs 175 mm long extruded brass plate handles, fabricated type, polished bright fancy type fixed with brass screws complete all as specified and directed. |
| 36 | S & F 150 mm long extruded brass plate handles, fabricated type, polished bright fancy type fixed with brass screws complete all as specified and directed. |
| 37 | S & F in repairs 150 mm long extruded brass plate handles, fabricated type, polished bright fancy type fixed with brass screws complete all as specified and directed. |
| 38 | S & F 150 mm long Extruded Aluminium alloy plate handles, ‘D’ type fabricated type, anodised complete all as specified and directed. |
| 39 | S & F in repairs 150 mm long Extruded Aluminium alloy plate handles, ‘D’ type fabricated type, anodised complete all as specified and directed. |
| 40 | S&F in repairs mortice locks suitable for aluminium door of 100 mm size 4 lever brass body vertical type as per existing or sample complete all as specified and directed. |
| 41 | S&F ward robe hooks of brass ( 50mm to 60mm) fixed to door shutters etc. complete all as specified and as directed . |
| 42 | S&F in repairs ward robe hooks of brass ( 50mm to 60mm) fixed to door shutters etc. complete all as specified and as directed . |
| 43 | S&F in repairs brass wire type 1 gate and shutter, hooks and eyes 200mm long heavy weight etc.complete all as specified and as directed . |
| 44 | S&F in repairs brass wire type 1 gate and shutter, hooks and eyes 150mm long heavy weight etc. complete all as specified and as directed . |
| 45 | S&F 55 mm dia, 70 to 80 mm height brass heavy weight single piece, polished cupboard / door knobs fixed with nut, screw and washer of brass, bright finished complete all as specified and as directed . |
| 46 | S&F in repairs 55 mm dia, 70 to 80 mm height brass heavy weight single piece, polished cupboard / door knobs fixed with nut, screw and washer of brass, bright finished complete all as specified and as directed . |
| 47 | S&F in repairs stainless steel curtain rod 25mm dia including fancy type brackets and end caps-02 No for each rod including 6 hooks for 1 mtr length of rod complete all as specified and as directed. |
| 48 | S&F in repair stainless steel towel rail ‘D’ type 600 mm long between flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleat complete all as specified and directed. |
| 49 | S & F in repairs Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 150 mm complete all as specified and directed. |
| 50 | S&F in repairs Aluminium (extruded section) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width of and of weight between 61 to 80 Kg. (extruded section) complete all as specified and directed. |
| 51 | S&F Brass metal label ( name tag ) pull frame file name, card, name tag holder of size 4\\"x2\\", shape as per the existing complete all as specified and as directed . |
| 52 | S&F in repairs Brass metal label ( name tag ) pull frame file name, card, name tag holder of size 4\\"x2\\", shape as per the existing complete all as specified and as directed . |
| 53 | S&F Stainless steel (SUS 304) solid body glossy cloth hanger for wall / door mounted of Pin 5 to 8 etc. complete all as specified and as directed . |
| 54 | S&F in repairs Stainless steel (SUS 304) solid body glossy cloth hanger for wall / door mounted of Pin 5 to 8 etc. complete all as specified and as directed . |
| 55 | S&F in repairs two way coat hooks solid body made up of SS 50mm to 60mm etc. complete all as specified and as directed . |
| 56 | S&F in repairs antique / ornamental Brass heavy duty Hinges, Aldrop, tower bolt, handles, latches, window/door stopper, sliding door bolt etc match to existing for doors, windows, ventilators & banister complete all as specified and as directed . |
| 57 | S&F in repairs cabin nos ( numerical 0-9) Material:Die cast solid brass, Finish:Lacquered Brass Finish minimum height 3 \\"inch fixed with min 02 brass screw complete all as specified and as directed . |
| 58 | S&F in repairs heavy duty high grade stainless steel wall mounted towel rack 600mm long with lower hanferan hooks fixed on wall complete etc complete all as specified and as directed . Make : Cera cat Part No F5003101 Ormond range, Parryware, Hindustan sanitary ware industries or equivalent |
| 59 | Labour for small repair to hinges, tower bolt, handle, latches, sliding door bolt, towel rack etc complete all as specified and as directed. |
| 60 | Fabrication only Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') etc complete all as specified and as directed . |
| 61 | M&L for servicing, overhauling, greasing, easing of existing Collapsible gate of any area or thickness and applying one coat of synthetic enamel paint after preparation of old decorated surfaces on both surfaces etc complete all as specified and as directed. |
| 62 | S&F of collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfasts and brackets complete all as per clause 10.24 of SSR Part - I 2009 complete all as specified and directed. |
| 63 | M&L anodised Aluminium window, ventilator shutter and frame fixed type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 64 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete all as specified and directed. |
| 65 | Fixing only Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete all as specified and directed. |
| 66 | S&F 4 mm thick E-board (designer pattern) ceiling of size 60x60 cm, fixed or laid / inserted to with and including aluminium framework with screws in false ceiling (flat or sloping) of grid size 605 x 605 mm and with and including anodised aluminium snap grid with 36.5 x 23.5 x 1.5 mm thick main Tee section and 23.5 x 23.5 x 1.5 mm thick cross Tee and 25 x 25 x 1.5mm angle fixed to perimeter of wall for false ceiling with and including supporting hanger with 4 mm dia. G.I. (length as required) adjusting level fixed to roof slabs/truss and ‘J bolts, nuts and washer for securing framework to ceiling suspended @ 120 cm both ways, size of grid shall be 610 x 610 mm complete all as specified and directed. |
| 67 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 68 | S&F 4 mm thick E-board (designer pattern) fixed or laid / inserted to timber/GI/MS framework with screws in false ceiling (flat or sloping) complete all as specified and directed. |
| 69 | Material and labour for 2-3 mm thick decorative Veneered, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work complete all as specified and as directed. |
| 70 | S&F veneered decorative 12mm thick plywood, grade I (with BWR rasin) with decorative face veneers 0.9mm thick lamination on one face fixed with screws or adhesive to plywood surfaces as in cupboard, drawer, kitchen cabinet etc complete all as specified and directed. |
| 71 | M&L machine cut kota stone slab flooring 20-25 mm (minimum) thick as in flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and including rubbing and mirror polishing and laid over 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 72 | M&L for 18-20 mm thick granite work (Rough surface, lakha red, flamed where ever necessary,) (table rubbed 7 polished ) thick granite stone slab (of any type ) work (table rubbed and polished ) as in floor, steps, jambs, pillars, window cills, laying over 15mm thick CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting and making good for disturbed surfaces and chamfering for exposed edges,surfaces complete all as specified and as directed . |
| 73 | M&L rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed. |
| 74 | M&L Coloured glazed ceramic tiles 300x200x7mm / 300x 450x 7 mm thick in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing with cm 1:4 complete all as specified and directed. |
| 75 | M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc.0.06 sqm but n. Exc. 0.11 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:6 finish even and rough complete all as specified and directed. |
| 76 | M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:6 finish even and rough complete all as specified and directed. |
| 77 | M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.18 sqm but n. exc. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm in cement mortar 1:6 complete all as specified and directed. |
| 78 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed. |
| 79 | M&L machine cut cudappah 20-25mm thick over cement screed base, laid set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 80 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 81 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 82 | M& L for sunken treatment to Floors of toilets/Baths/WCs/Kitchen as under :- (a) Clean the sunken portion of toilet/Bath/WC/Kitchen thoroughly to remove laitance, dirt, dust, etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar (\\"Dr Fixit\\" Pidicrete URP\\" or eqvt) (c) Sanitary pipes entering through walls and floor shall be sealed with \\"Dr Fixit Bathseal Tape\\" and the gaps to be grouted with non-shrink cementitious grout \\"Dr Fixit Bathseal Grout\\" or eqvt. Nahani traps, etc to be fitted securely and the gaps around it to be grouted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating \\"Dr Fixit Bathseal Plus\\" or eqvt on all angle fillets by brush and cover it with 100 mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely. (e) In the remaining area, in dry sustrate condition brush apply first coat of the same coating and further apply second coat when first coat is dry. Extend the coating upto 150 mm above the FFL. Above FFL, another cementitious waterproof coating \\"Dr Fixit Pidifin 2 K\\" or eqvt can be further applied right upto 2.1 mm to waterproof the shower area also, it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hours and allow to dry completely. (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed M 15 type B0 mixed with integral WPC (Liquid) laid to slope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 100mm 1:5:10 type E2 (using 20mm graded stone aggregate). (g) After completing plumbing work in the toilet/WC/Bath/ Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready-to -make Tile grouts of appd makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc complete all as specified and as directed . |
| 83 | M&L for the following :- (a) M&L for Making hole and fix 12mm dia GI Nozzle @0.5 mtr c/c on the entire area of sunken portions and applying chemical injection grouting through the nozzles with cement slurry admixture with Dr fixit bath seal grouting or other equivalent with pressure pump in 40 PSI.seal off the nozzle and cutting the same after grout has set as specified and directed by engineer in charge (b) The tile joint chemical cleaning and re-grouting carefully by washing the existing tille with heavy duty tile cleaner preferably of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white/matching colour) epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent, curing, cleaning the surface etc, complete all as specified and as directed and as per the sample done at ground level. |
| 84 | M & L for painting the old ceiling surface complete all as specified and directed as follows :- (a) Surface Preparation- Preparation of old plastered or previously untreated surfaces of ceiling. (b) Putty application- NIL (c) Priming surface- NIL (d) Painting- Applying one coat of white wash. |
| 85 | M & L for painting the old wall surface complete all as specified and directed as follows :- (a) Surface Preparation- Preparation of old plastered or previously untreated surfaces of walls (b) Putty application- NIL (c) Priming surface- NIL (d) Painting- Applying one coats of cement base paint. |
| 86 | M&L for preparing surfaces of old roof tiles ( Mangalore tiles / taylor tiles) of pattern as specified and applying one coat of water based exterior paint with approved make complete all as specified and directed. Note (i) Area measured flat, no addition shall be made for corrugations, offsets, etc (ii) Rates quoted are deemed to be inclusive of scaffolding required upto height of 20mtr and safety equipment required as per safety norms. |
| 87 | M&L for complete removal of existing treatment on wall to make the surface from dust, loose paint and loose plaster by scrapping manually/mechanically complete all as specified and directed (Note-Nails, screws if any to be removed properly before scraping) |
| 88 | M&L for complete removal of existing treatment on ceiling to make the surface from dust, loose paint and loose plaster by scrapping manually/mechanically complete all as specified and directed (Note-Nails, screws if any to be removed properly before scraping) |
| 89 | M&L for providing a thin layer of water proof cement base putty over prepared old plastered / old painted wall surface to prepare the surface even and smooth upto desired finishes by manually / mechanical means etc complete all as specified and directed. |
| 90 | M&L for providing a thin layer of water proof cement base putty over prepared old plastered / old painted ceiling surface to prepare the surface even and smooth upto desired finishes by manually / mechanical means etc complete all as specified and directed. |
| 91 | M&L for one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied on wall with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. |
| 92 | M&L for one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied on ceiling with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. |
| 93 | M&L for applying two coats of oil bound distemper on new wall surface using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper shall be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 94 | M&L for applying two coats of oil bound distemper on new ceiling surface using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper shall be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 95 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying one coat of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 96 | M&L for preparation of old surfaces (plastered or unplastered) of ceiling including cornices, with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying one coat of oil bound distemper on ceiling using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 97 | M&L for one coat of acrylic water based exterior grade primer on old wall surface @ 0.9 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied on wall with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. |
| 98 | M&L for Two coats water based premium acrylic smooth exterior emulsion paint on wall of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti fungal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and as directed . |
| 99 | M&L for preparing old surface with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying One coat of water based premium acrylic smooth exterior quality emulsion paint on old wall surfaces of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti fungal properties in one coat @ 0.75 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over preparing surfaces with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. etc complete all as specified and directed. |
| 100 | M&L for preparation of old treated any Surfaces of any description, over 10cm in width or girth, fill the gap or crack, hole with filler/putty etc including cleaning and make the surface smooth and applying One coat of Duco painting by auto spray machine etc till the surface became fine glossy finish complete all as specified and directed. |
| 101 | Material and labour for complete removal of existing treatment from exterior wall/ chajja/ roof projection surface by using \\"Ultra- High Pressure Water Jet\\" (Upto 40,000 Psi) complete all as specified and as directed. Make- KLENCO or equivalent complete all as specified and directed (Height Upto 10m) |
| 102 | M&L for thorough cleaning of stain/paint etc with paint remover chemical and removal of loose screed and pointing wall surfaces and repairing of the damaged portions of walls etc complete all as spd and as directed. |
| 103 | Taking up/down plants or vegetation growth from wall upto roof level by means of cutting hole into brick wall and making good the surface of dismantled portion (not exc 150 sq cm superficial area and not exc one brick depth) using brick bats /aggregate and plastering in cement mortar (1:4) to disturbed portion and applying two coats of cement base paint / weather coat to match the existing surface upto forth floor complete all as specified and directed |
| 104 | M&L for the tile joint chemical cleaning and re-grouting carefully by washing the existing tille with heavy duty tile cleaner preferably of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white/matching colour) epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent, curing, cleaning the surface etc, complete all as specified and as directed and as per the sample done at ground level. |
| 105 | M&L for anti skid luminous fall resistant 5mm width Grip tape fixed with adhesive to the edge of trades of stairs etc complete all as specified and as directed. |
| 106 | S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed. |
| 107 | S&F 4 mm thick one side ground glass sheet ordinary quality and glazing with oil putty/ wooden beading n.exc 0.5Sqm in each pane complete all as specified and as directed .. |
| 108 | Hacking out old broken glass (any thickness, size, quality or description) from steel/wooden frames or stones, concrete or brick surrounds glazed with oil putty or fixed with beads complete all as specified and directed. |
| 109 | M & L for painting the new wood surface complete all as specified and directed as follows :- (a) Surface preparation- Preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth (b) Priming surface- Applying one coat of pink primer (c) Painting- Applying two coat of synthetic enamel paint. |
| 110 | M&L for preparation of old wooden surface smooth with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc or flaming polish which ever is suitable for site and fill the gap or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door and applying one coat of synthetic enamel paint exc 10 cm width or girth with fully automatic airless spray machine complete all as specified and directed. |
| 111 | M&L for one coat of synthetic enamel paint with fully automatic airless spray machine including preparation of old painted surfaces of wood, wood based surfaces, AC sheet in ceiling exc 10 cm width or girth etc in ceiling incl filling of gaps between wooden planks with putty,POP complete all as specified and directed. |
| 112 | M&L for preparation of old wooden surface smooth with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc or flaming polish which ever is suitable for site and fill the gap or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door and applying one or more coats of french polishing exc 10 cm width or girth with fully automatic airless spray machine complete all as specified and directed. |
| 113 | M&L for preparation of old treated wooden Surfaces of any description, over 10cm in width or girth, fill the gap or crack, hole with wood filler or POP, putty etc including cleaning and make the surface smooth and applying One coat Varnishing etc till the surface became fine glossy finish complete all as specified and directed. |
| 114 | M & L for painting the old steel surface complete all as specified and directed as follows :- (a) Surface preparation- Preparation of old steel surfaces of any description, not otherwise described over 10 cm width or girth (b) Priming surface- NIL (c) Painting- Applying one coats of synthetic enamel paint. |
| 115 | M & L for painting the new steel surface complete all as specified and directed as follows :- (a) Surface preparation- Preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth (b) Priming surface- Applying one coat of red oxide primer (c) Painting- Applying two coats of synthetic enamel paint. |
| 116 | M & L for painting the old steel surface complete all as specified and directed as follows :- (a) Surface preparation- Preparation of old steel surfaces of any description, not otherwise described over 10 cm width or girth (b) Priming surface- NIL (c) Painting- Applying one coats of aluminium paint. |
| 117 | M&L for French polishing on wooden surface of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed. |
| 118 | Taking up or down 15 mm dia steel tubing and connections, complete all as specified and directed. |
| 119 | Taking up or down 20 mm bore steel tubing and connections, complete all as specified and directed. |
| 120 | Taking up or down 25 mm bore steel tubing and connections, complete all as specified and directed. |
| 121 | Re-fixing old steel tubing 15 mm bore in new or old position in walls / ceiling or in floors etc. complete all as specified and as directed. |
| 122 | Re-fixing old steel tubing 20mm bore in new or old position in walls / ceiling or in floors etc. complete all as specified and as directed. |
| 123 | S&F 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor with clip, hooks and saddles complete all as specified and directed. |
| 124 | S&F 20 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor with clip, hooks and saddles complete all as specified and directed. |
| 125 | S&F 25 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc.) and fixed to wall / ceiling or laid in / on floor with clip, hooks and saddles complete all as specified and directed. |
| 126 | S&F in repairs 15 mm bore bib tap chromium plated long body fancy type, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. |
| 127 | S&F in repairs 15 mm bore bib tap, two way, fancy type chromium plated, cast copper alloy, with crutch or butterfly handle and wall flange, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 128 | S&F in repairs pillar tap 15 mm bore,fancy type, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered “hot\\" or “cold” with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 129 | S&F in repair brass CP wall mixer with over head shower arrangement chromium plated 15 mm bore with capstan head, screwed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts, connecting legs and wall flanges screwed for iron pipe as complete all as specified and directed. |
| 130 | S & F in repair 15 mm bore stop valve / angle valve fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions including CP nipple and socket complete all as specified and as directed . |
| 131 | S&F in replacement 15 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 132 | S&F in replacement 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 133 | S&F in repairs 25 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 134 | S&F in repairs 40 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 135 | S&F in repairs PVC flush tank ball cock set complete all as specified and directed. |
| 136 | S&F in repairs spindle for 15mm/20mm CP / brass bib cock, stop cock & concealed stop valves, WHB mixtures etc complete all as specified and directed. |
| 137 | S & F in repairs 32 / 40mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms / 40mm-60gms) complete all as specified and directed. |
| 138 | S&F in repairs CP knob suitable for basin/wall mixture complete all as specified and as directed. |
| 139 | S&F in repairs 100mm dia of of PTMT (Minimum weight 25gms) complete all as specified and as directed. |
| 140 | S&F in repairs 100/125mm dia stainless steel gratings, doom type, chromium plated, with or without waste hole, fixed to floor trap complete all as specified and as directed. |
| 141 | S&F in repairs Urinal Auto closing system with built in control cock with wall flange alloy screwed for iron pipe 15 mm bore complete all as specified and directed. |
| 142 | S&F in repairs Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60gms) complete all as specified and directed. |
| 143 | S&F in repairs CP urinal connection pipe 15 mm bore 115mm length etc complete all as spd and as directed. |
| 144 | Dismantling 75/100/150 mm dia CI pipes including tee, branch piece, bend at any position (wall or laid in trench) complete all as specified and as directed . |
| 145 | M & L CI sand pipe 75mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints laid in trenches or in floors including necessary clamps etc., complete all as specified and as directed. |
| 146 | M & L CI sand pipe 100mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc., complete all as specified and as directed. |
| 147 | S & F CI bends 75 mm bore with oval access door complete all as specified and directed |
| 148 | S & F CI bends 100 mm bore with oval door access complete all as specified and directed |
| 149 | S & F CI branch piece 75mm bore, single(equal or unequal),ordinary or inverted spigot or socket type with parallel branches and fitted with oval access door complete all as specified and as directed. |
| 150 | S & F CI branch piece 100mm bore, single(equal or unequal),ordinary or inverted spigot or socket type with parallel branches and fitted with oval access door complete all as specified and as directed. |
| 151 | S & F CI cowls 75 mm complete all as specified and directed |
| 152 | S & F CI cowls 100 mm complete all as specified and directed |
| 153 | S & F in repairs of ringfit PVC (SWR) pipe 75 mm bore, type B, single socketed, in any length with rubber ring, one end socketed and other plain duly fixed with cement solvent etc, fixed to walls complete all as specified and directed. |
| 154 | S & F in repairs of ringfit PVC (SWR) pipe 110 mm bore, type B, single socketed, in any length with rubber ring, one end socketed and other plain duly fixed with cement solvent etc, fixed to walls complete all as specified and directed. |
| 155 | S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 156 | S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 157 | S & F 110 mm bore PVC (SWR) branch piece single, (single Y) equal or unequal, Type B, complete all as specified and directed. |
| 158 | S & F 110 mm bore PVC (SWR) junction single, (single T) equal or unequal, Type B, complete all as specified and directed. |
| 159 | S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 160 | M&L Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to wall,ceiling or floors etc.40 mm bore pipe complete all as specified and directed. |
| 161 | S&F in repairs vitreous china European water closet pan (pedestal pattern) white in colour with fixing bolts and flush pipe, connection to trap and to flushing cistern and all joints, including plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel CP hinges complete all as specified and directed. |
| 162 | S&F in repairs vitreous China squatt pattern white, size 630 mm with integral foot rest, including 'P' or 'S' trap CI/PVC as per existing and including connection to trap and to flushing pipe including provn of line concrete holding CI anti -syphonage pipe complete all as specified and directed. |
| 163 | S&F in repairs vitreous china (white) flat back urinal half stall type 465x 355x 265 mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. |
| 164 | S&F in repairs PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets complete all as specified and directed. |
| 165 | S&F in repairs swivel shower rose size 125 mm of brass chromium plated any colour (minimum weight 40 gms) for fixing with 15mm dia steel pipe complete all as specified and directed. |
| 166 | S&F in repair brass chromium plated toilet paper holder fixed to walls with chromium plated brass screws complete all as specified and as directed. |
| 167 | S&F in repairs plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel CP hinges for European water closet pan complete all as specified and directed. |
| 168 | S&F in repairs vitreous China wash hand basin white angle back of size not less than 600 x 480 mm with and including PVC waste pipe 32 mm bore 900 mm long, CP waste fitting and cutting for and pinning in ends of brackets etc including CI brackets, complete all as specified and directed. |
| 169 | S&F in repairs 5.5 mm thick looking mirror any size bevelled edge of selected quality glass with aluminium frame channel around mounted on 4 mm thick commercial plywood fixed to wooden plugs/PVC rawl plug with chromium plated brass screw and cup washer complete all as specified and directed. |
| 170 | S&F stay for Health faucet complete all as specified and directed. |
| 171 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed . |
| 172 | S&F in repairs PVC waste pipe for urinal / WHB 32 mm / 40 mm bore with one end with socket for WHB/urinal/sink etc complete all as specified and directed. |
| 173 | Taking down collapsible shutter area exc 4 sqm but n exc 15 sqm complete all as specified and as directed . |
| 174 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar complete all as specified and directed. |
| 175 | Dismantling Unframed timber scantlings 40 Sqcm and over in section and in any position in framed work complete all as specified and directed. |
| 176 | Dismantling of timber fillet, rails, post, rafters, purlins, etc. under 40 Sqcm in section Unframed work complete all as specified and directed. |
| 177 | Dismantling wall and ceiling boards, partitions of any description or in any position (fibre, pulp, insulation etc.) any thickness, or insulation boards/ slabs/ blankets of any thickness including cover fillets complete all as specified and directed. |
| 178 | Taking down carefully old unserviceable copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and as directed . |
| 179 | Taking down copper / aluminium concealed sub main wiring complete with all fixture and fittings including cutting chasing as required and making good the disturbed surfaces including finishes to match with adjacent surfaces of walls, floors, etc. complete all as specified and as directed. |
| 180 | M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including PVC casing caping (double lock pattern) and accessories on wall / ceiling surfaces etc. with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with PVC box, modular cover plate with frame, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc including all other fixing accessories for one light / fan / exhaust fan point controlled by one 5 / 6 Amps switch complete all as specified and directed. |
| 181 | All as per Sl. item No. 180 above but for one 3 /6 Amps socket outlet point on independent board. |
| 182 | All as per Sl. item No. 180.00 above but for one 3 / 6 Amps socket outlet point on the same board. |
| 183 | All as per Sl. item No. 180.00 above but for one light point controlled by two, 2 - way switches complete all as specified and directed |
| 184 | All as per Sl. item No. 180.00 above but for one bell/buzzer point controlled by one push button on the same board with other switches or independent complete all as specified and directed |
| 185 | All as per item No. 180.00 here-in-before but one 3 pin socket outlet / 15 amps on the independent board with other switches, with cables 2.5 sqmm size complete all as specified and directed |
| 186 | M&L replacement of sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 1.5 Sqmm , 1100 Volts grade in and including PVC Conduit/casing caping medium grade not less than 25 mm complete with conduit accessories and copper cable 1.5 sqmm continuous earth wire complete all as specified and directed (Two runs of 1.5 Sqmm cable with 01 run of 1.5 Sqmm earth wire along with casing caping/conduit shall be measured as one RM) |
| 187 | M&L replacement of sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 2.5 Sqmm , 1100 Volts grade in and including PVC Conduit/casing caping medium grade not less than 25 mm complete with conduit accessories and copper cable 2.5 sqmm continuous earth wire complete all as specified and directed (Two runs of 2.5 Sqmm cable with 01 run of 2.5 Sqmm earth wire along with casing caping/conduit shall be measured as one RM) |
| 188 | M&L replacement of sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including PVC Conduit/casing caping medium grade not less than 25 mm complete with conduit accessories and copper cable 4 sqmm continuous earth wire complete all as specified and directed (Two runs of 4 Sqmm cable with 01 run of 4 Sqmm earth wire along with casing caping/conduit shall be measured as one RM) |
| 189 | M&L replacement of sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 6 Sqmm , 1100 Volts grade in and including PVC Conduit/casing caping medium grade not less than 25 mm complete with conduit accessories and copper cable 6 sqmm continuous earth wire complete all as specified and directed (Two runs of 6 Sqmm cable with 01 run of 6 Sqmm earth wire along with casing caping/conduit shall be measured as one RM) |
| 190 | S&F in replacement of switch piano flush type ,SP,one way, 6 Amps, 240 volt complete all as specified and directed. |
| 191 | S&F in replacement of switch piano flush type one way, 20 Amps, SP,240 volt complete all as specified and directed. |
| 192 | S&F in replacement of switch socket combination 2 in 1 , 3/5 pin , 5 and 15 amps flush type multi purpose complete all as specified and directed. |
| 193 | S&F in replacement of switch socket combination 2 in 1 , 3 pin , 6 and 16 amps flush type with box multi purpose complete all as specified and directed. |
| 194 | S&F in replacement of switch socket combination 5 pin 6 Amp, flush type multipurpose complete all as specified and directed. |
| 195 | S&F in replacement of switch socket combination 5 pin 6 Amp, flush type with box multipurpose complete all as specified and directed. |
| 196 | S&F in replacement of switch piano modular type 01 module, one way, 5 / 6 Amps, 240 volt complete all as specified and directed. |
| 197 | S&F in replacement of switch piano modular type one way 01 module, with indicator, 20 Amps, 240 volt complete all as specified and directed. |
| 198 | S&F in replacement of switch piano modular type two way, 10 Amps independent, 240 volt complete all as specified and directed. |
| 199 | S&F in replacement of modular type Bell push 10 A , 1 module complete all as specified and directed. |
| 200 | S&F in replacement of socket outlet modular type 2/3 pin 6 Amps, 240 volts combined 2 module complete all as specified and directed. |
| 201 | S&F in replacement of socket outlet modular type 2/3 pin, combined 2 module, 6/16 Amps, 240 volts complete all as specified and directed. |
| 202 | S&F in repair electronic modular fan regulator, stepped type( 4 step), white 120 W - 2 module complete all as specified and directed. |
| 203 | S&F in replacement of 1 module Blanking plates complete all as specified and directed. |
| 204 | S & F in replacement of PVC unbreakable surface boxes of 1 gang box complete all as specified and as directed . |
| 205 | S & F in replacement of PVC unbreakable surface boxes of 2 gang box complete all as specified and as directed . |
| 206 | S & F in replacement of PVC unbreakable surface boxes of 3 gang box complete all as specified and as directed . |
| 207 | S & F in replacement of PVC unbreakable surface boxes of 4 gang box complete all as specified and as directed . |
| 208 | S & F in replacement of PVC unbreakable surface boxes of 5 gang box complete all as specified and as directed . |
| 209 | S & F in replacement of PVC unbreakable surface boxes of 6 gang box complete all as specified and as directed . |
| 210 | S & F in replacement of PVC unbreakable surface boxes of 7 gang box complete all as specified and as directed . |
| 211 | S&F in replacement for white cover plate with frame 1 or 2 module complete all as specified and as directed . |
| 212 | S&F in replacement for white cover plate with frame 3 module complete all as specified and as directed . |
| 213 | S&F in replacement for white cover plate with frame 4 module complete all as specified and as directed . |
| 214 | S&F in replacement for white cover plate with frame 6 module complete all as specified and as directed . |
| 215 | S&F in replacement for white cover plate with frame 8 modulecomplete all as specified and as directed . |
| 216 | S&F in replacement for white cover plate with frame 12 module complete all as specified and as directed . |
| 217 | S&F in replacement for white cover plate with frame 16 module complete all as specified and as directed . |
| 218 | S&F in replacement for white cover plate with frame 18 module complete all as specified and as directed . |
| 219 | S&F in replacement for square box, 2 to 3 terminals /PVC/Polycarbonate, isolated body complete all as specified and as directed . |
| 220 | S&F in replacement for round plate, 2 to 3 terminals /PVC/Polycarbonate, isolated body complete all as specified and as directed . |
| 221 | Supply only 9 W WW LED Lamp for E14/E27/B22 Holders complete all as specified and as directed . |
| 222 | Supply only rigid non-metallic PVC casing capping, double lock type/PVC conduit (ISI marked) of size not less than 25mm, including all necessary accessories (e.g., bends, elbows, connectors, saddles, screws,round plate etc.) for securing loose wiring and repairing/re-routing point wiring and submain wiring, complete as specified and directed by the Engineer-in-Charge. This includes: a) Supply of 25mm or larger rigid non-metallic PVC casing capping/conduit (ISI marked). b) Supply of all necessary accessories (bends, elbows, connectors, saddles, screws, etc.).c )Securing loose wiring within the casing/conduit. d) Repairing/re-routing existing point wiring/submain wiring as needed. e) Making necessary connections and terminations') Testing of the wiring after completion. Notes: Rates shall include the cost of all materials, labor, tools, equipment, transportation, and any other incidental expenses required for the complete execution of the work. |
| 223 | supply and installation of flexible conduit pipes, ivory grey,white in colour, with a minimum internal diameter of 25mm. The conduit shall be of a type suitable for [Specify application, e.g., electrical wiring, data cabling, etc.]. Installation includes cutting, bending (where necessary), and securing the conduit as per the approved design and complete all as specified and as directed . |
| 224 | Supply and fixing replacement of rigid non-metallic PVC cable tray , double lock type (ISI marked) of size not less than 80x40mm, including all necessary accessories (e.g.,Bends (flat, internal, external),Risers,Couplers,Dividers,Support brackets, elbows, connectors, saddles, screws,round plate etc.) for securing loose wiring and repairing/re-routing point wiring and submain wiring, complete all as specified and as directed . This includes: a) Supply of80x40mm or larger rigid non-metallic PVC cable tray. b) Supply of all necessary accessories (Bends (flat, internal, external),Risers,Couplers,Dividers,Support brackets, elbows, connectors, saddles, screws,round plate etc..c )Securing loose wiring within the cable tray. d) Repairing/re-routing existing point wiring/submain wiring as needed. e) Making necessary connections and terminations') Testing of the wiring after completion. Notes: Rates shall include the cost of all materials, labor, tools, equipment, transportation, and any other incidental expenses required for the complete execution of the work. |
| 225 | S&F in replacement of ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed. |
| 226 | S&F in replacement of angular type lamp holder, PVC/Polycarbonate type with back plate suitable for Led lamp complete all as specified and as directed . |
| 227 | S&F in replacement of stepped type electronic fan regulator two module, with 5 step, AC 50 Hz 240 Volts grade complete all as specified and directed. |
| 228 | S&F in replacement of surface Mounted LED Downlights 12 W Environmental friendly ,energy saving,recess mounted downlighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and as directed. |
| 229 | S&F in replacement of surface Mounted LED Downlighs 30 W Environmental friendly ,energy saving,recess mounted downlighter with electronic driver including connecting with twin core wire,including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and as directed. |
| 230 | S&F in replacement of surface/recess mounted 2' x 2' LED Panel lights 40 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for Armstrong/Grid ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully complete all as specified and as directed . Note: The quoted price shall include the cost of Lamp and its driver. |
| 231 | S&F in replacement of COB light 12W LED Tiltable surface mounting and Environmental friendly, new generation, energy saving, decorative IP 66 complete all as specified and as directed . |
| 232 | Supply and Fix Wireless Door Bell, Ding Dong AC. 230 volts, single pole complete all as specified and as directed . |
| 233 | S & F in replacement of Surface and wall mounted LED batten 10 watt 2 ft long with Aluminum housing & integrated Electronic Driver with IP20, PF 0.90, total System Lumens 1050 Lumens, 6500k CRI = 80, Operating Voltage range 140 V - 270 V including connecting with 2 core flat multistrand copper cable complete all as specified and as directed. |
| 234 | S & F in replacement of Surface and wall mounted LED batten 20 watt 4ft long with Aluminum housing & integrated Electronic Driver with IP20, PF 0.90, total System Lumens 1050 Lumens, 6500k CRI = 80, Operating Voltage range 140 V - 270 V including connecting with 2 core flat multistrand copper cable complete all as specified and as directed. |
| 235 | S & F in replacement of LED building security Light 30 watt,IP-65 protection made up of die cast aluminium housing with highly efficient LEDs as lighting source and PC cover with integrated lens with IP66, top opening separate driver compartment, IK07, System Lumen Efficasy =100 Lm/W, 5 kV Surge Voltage Protection,Operating Voltage range 140 V - 270 V and bracket suitable for street light made out of GI pipe light grade of 25 mm bore & 0.75 mtr length (minimum), bend to shape including 2 pairs of MS flat iron clamps made out of 40 x 5 mm MS flat, nuts, bolts & washers etc, & painting the bracket with two coat of aluminium paint over a coat of red oxide primer complete all as specified and as directed. |
| 236 | S&F in replacement of Decorative wall mounting Wall Lamp with B22 LED 9W and connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed . |
| 237 | S&F in replacement of Decorative hanging table lamp with B22 LED 9W and connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed . |
| 238 | S&F in replacement of Decorative hanging with B22 LED 9W and connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and as directed . |
| 239 | S&F in replacement of for 25 mm dia GI tubing light grade bracket over all 1.2 mtr length bent to shape 120 degree with cutting as required and bend to shape with flat iron clamp of size 32x6 mm, 2 Nos, suitable size of nut bolts and washers complete for fixing street light fittings on electric poles/bldgs for security complete all as specified and as directed . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender