Tender For Addition Alteration To Wash Rooms And Certain Other Minor Works (04 Jobs) At Afs Under Ge(Af) Sambra.
Tender Value
19.10 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
8 days left
EMD
39000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Belagavi → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Wash Rooms And Certain Other Minor Works (04 Jobs) At Afs Under Ge(Af) Sambra.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for machine cut Kota stone slab flooring 18mm to 20mm thick laid over and including 20mm thick screed bed in CM(1:6) including rubbing and polishing complete all as specified and directed. |
| 2 | S&F CPVC pipe 50mm bore of pressure rating 6 kg/sqcm fixed to walls, ceiling or in floors including all fittings and clamps and/or cutting concrete portion and making good as required including taking up or down 50mm bore GI/PPR/PVC tubing and connections along with fittings complete all as specified and directed. |
| 3 | S&F in replacement 3000 liters capacity rotational moulded poly- ethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted and fixed in position upto four storey height complete all as specified and directed. |
| 4 | S&F Nipple suitable for HDPE water tank of 50mm size (Minimum weight 15mm-38gms/20mm45gms /25mm- 65gm/50mm-100gm complete all as specified and directed. |
| 5 | S&F PTMT Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 50mm bore dia of pipe and fixed complete all as specified and directed. |
| 6 | S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel, or flat section) including distance pieces, cleats etc. of Fe 410-W (Gde E-250) quality-A complete all as specified and directed. |
| 7 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and directed. |
| 8 | Disconnecting existing tanks exc 2000 but not exc 3000 ltrs, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt, etc,from mouths of circulating pipes including hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 9 | Dismantling floor hearth, wall tiling including cement mortar bedding (but not backing) and removal of debris out of MD land complete all as specified and directed |
| 10 | M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.18 sqm but not exc 0.38 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles laid over and including cement screed 15 mm thick in CM(1:4) complete all as specified and directed. |
| 11 | M&L for non - skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirting, dado, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over and including rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed. |
| 12 | Demolition stone/ brick masonry, built in cement mortar or cenent lime mortar including all quoins, arches, pillars, etc., complete all as specified and directed. |
| 13 | M&L for pre-cast cement concrete block masonry with solid blocks type C1, PCC 1:3:6 (using 20mm graded crushed stone aggregates) exc 10cm in width and setting in CM 1:6 complete all as specified and directed. |
| 14 | M&L for reinforced cement concrete ( nominal mix) 1:2:4, type B1(using 20 mm graded crushed stone aggregates) as in beams , cantilevers , bressummers , lintels over 1.5 m span complete all as specified and directed. |
| 15 | M&L for formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc.also splays between floors and beams,etc. rough finished surface of concrete flat complete all as specified and directed. |
| 16 | M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required and binding with MS wire not less than 0.9mm dia complete all as specified and directed. |
| 17 | All as per Srl item No.16 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 18 | M&L for preparation of old painted wall surfaces and applying two coat of Acrylic distemper complete all as specified and directed. |
| 19 | M&L for preparation of old decorated surfaces of ceilings and applying two coats of white wash complete all as specified and directed. |
| 20 | Taking down chowkats or frames not exc 1.5 sqm each complete all as specified and directed. |
| 21 | S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 22 | S&F sheet plain glass 5.5 mm thick, ordinary quality, in squares not exceeding 0.5 Sqm for each pane, glazing with oil putty or aluminium beading complete all as specified and directed. |
| 23 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws or aluminium beading complete all as specified and directed. |
| 24 | Taking down chowkat or frames (wooden/pvc) w/o taking off shutter from the frame exceeding 1.5 Sqm not exc 4.0 Sqm each complete all as specified and directed. |
| 25 | S&F second class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 26 | S&F 35mm thick second class hardwood glazed skeleton shutters open rebated and prepared to receive glass gazed etc but divided into squares with plain chamfered or rounded mitred and rebated sash bar any numbers edges of framing plain chamfered or rounded fitted with cut and mittered beads for sceuring glass guage etc. size of members as specified in SSR Pt-I, Section 8 clause 8.24(a) fitted to chowkhats complete all as specified and directed. |
| 27 | S&F second class hardwood rail and style 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS : 1003(Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 28 | S&F 100 mm long butt hinges medium weight cold rolled to door frame with necessary screwing or bolting complete all as specified and directed. |
| 29 | S&F 200 mm long aluminium anodised handle fabricated type complete all as specified and directed. |
| 30 | S&F 200 mm long aluminium anodised barrel tower bolt complete all as specified and directed. |
| 31 | S&F 250 mm Aluminium alloy, anodised sliding door bolt with hasp and stapple bolt type complete all as specified and directed.. |
| 32 | M&L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new or previously untreated wood surfaces of any description not other wise described over 10 cm with or girth complete all as specified and directed. |
| 33 | M&L for one coat of synthetic enamel paint on old painted steel surfaces of any description over 10cm width or girth including necessary preparation of surface complete all as specified and directed. |
| 34 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 35 | S&F Harrison rails 20mm dia, mild steel, chromium plated with fixing brackets, stops, rollers complete all as specified and directed. |
| 36 | S&F factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded, the hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 Nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge |
| 37 | S&F factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws complete all as specified and directed. |
| 38 | M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed |
| 39 | M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 finishing even and smooth without using extra cement complete all as specified and directed |
| 40 | M&L for preperation newly plastered surfaces and applying two coats of Acrylic distemper over a coat of primer on walls, pillasters, cornices, etc., including applying 3mm thk wall care putty over old surface complete all as specified and directed |
| 41 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms including grooves .and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Granite including screed bed 20mm thick in CM 1:3 complete all as specified and directed. |
| 42 | S&F Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed. |
| 43 | S&F Powder coated, anodised aluminium door shutters, aluminium sections weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing, handles 2 Nos, in each door hinges, aluminium anodised snap beading screws etc and necessary packing materials etc complete all as specified. |
| 44 | S&F Aluminium (Extruded Section ) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed |
| 45 | S&F 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work complete all as specified and directed. |
| 46 | M&L for provinding and fixing stainles steel (grade 304) railing made of hollow tubes channel plate etc including welding ,grinding ,buffing ,polishing and making curvature (where ever required ) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories &stainless steel dash fasteners stainless, steel bolts etc. of required size on top of floor or the side of waist eith suitable arrangement complete all as specified and directed |
| 47 | M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6 complete all as specified and directed |
| 48 | M&L for rendering 15 mm thick in CM 1:6 on fair surfaces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 49 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed |
| 50 | M&L for glazed coloured ceramic tiles of size 350mmx250mmx7mm / 450mmx350mmx7mm thick as in as in vertical surfaces such as skirting, dado, etc., set and joint in neat cement slury and pointed in white or colour laid over and including 10mm thick plaster in CM 1:4 as backing coat to receive tiles complete all as specified and directed. |
| 51 | S&F Anodised aluminium powder coating of any colour (thickness or powder coating not less than 50 micron).window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 52 | M&L for 4.8mm thick plain tinted sheet glass ordinary quality in squares exc 0.5 Sqm each pane for aluminium window, complete all as specified and directed. |
| 53 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed Please Enable Macros to View BoQ information |
| 54 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender