Tender For Construction Of Proposed Integrated Sub-Divisional Office At Rangia In Kamrup(Supply Of Furniture, False Ceiling Works, Electrical Works Etc.)
Tender Value
93.11 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
18 days left
EMD
1.86 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Proposed Integrated Sub-Divisional Office At Rangia In Kamrup(Supply Of Furniture, False Ceiling Works, Electrical Works Etc.)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing tiled false ceiling of specified materials of size595x595 mm in true horizontal level, suspended on inter lockingmetal grid of hot dipped galvanized steel sections ( galvanized @120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runnerwith suitably spaced joints to get required length and of size 24x38mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200 mm long spaced between main\\"T\\" at 600 mm center to center to form a grid of 1200x600 mm andsecondary cross \\"T\\" of length 600 mm and size 24x25 mm made of0.30 mm thick (minimum) sheet to be interlocked at middle of the1200x600 mm panel to form grids of 600x600 mm and wall angle ofsize 24x24x0.3 mm and laying false ceiling tiles of approved texturein the grid including, required cutting/making, opening for serviceslike diffusers, grills, light fittings, fixtures, smoke detectors etc. Main\\"T\\" runners to be suspended from ceiling using GI slotted cleats ofsize 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4 mm GI adjustable rods with galvanisedbutterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mmcenter to center along main T, bottom exposed width of 24 mm of allT-sections shall be pre-painted with polyester paint, all complete forall heights as per specifications, drawings and as directed byEngineer-in-charge. 12.5 mm thick square edge PVC Laminated GypsumTile of size 595x595 mm, made of Gypsum plasterboard,manufactured from natural gypsum as per IS 2095 part Iand laminated with white 0.16mm thick fire retardantPVC film on the face side and 12micron metalizedpolyester on the back side with all edges sealed with the face side PVC film which goes around and wrapsthe edges and is bonded to the edges and the back sidemetalized polyester film so as to make the tile acompletely sealed unit. |
| 2 | 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : Second class teak wood |
| 3 | Providing SYNERGY CABIN TABLE of Main Table Size: 1800 x 750 x 750 HT and Side Composite size: 900 x 450 x 750HT, as directed by the concerned department |
| 4 | Providing NEO 50 WORKSTATION of Main Table Size: 1200 X 600 X 750 HT and Mobile pedestal size: 400 x 450 x 600HT as directed by the concerned department |
| 5 | Providing HT-501(A) CABIN TABLE of MAIN TABLE SIZE: 2200W X 800D X 780HT and SIDE TABLE SIZE: 1010W X 500D X 650HT as directed by the concerned department |
| 6 | Providing CENTRE TABLE Size: 1050 x 525 x 450HT as directed by the concerned department |
| 7 | Providing WORKSTATION CHAIR of MODEL: COMET MB as directed by the concerned department |
| 8 | Providing HIGH BACK CUBICLE CHAIR of MODEL: ASTRO HB as directed by the concerned department |
| 9 | Providing VISITOR CHAIR of MODEL: CONTACT VA as directed by the concerned department |
| 10 | Providing CONFERENCE MID BACK CHAIR of MODEL: AMAZE MB as directed by the concerned department |
| 11 | Providing CAFÉ CHAIRof MODEL: TANG as directed by the concerned department |
| 12 | Providing PLB OPENABLE STORAGE MID HEIGHT STORAGE of SIZE: 900 X 450 X 1200HT as directed by theconcerned department |
| 13 | Providing PLB OPENABLE STORAGE FULL HEIGHT STORAGEof SIZE: 900 X 450 X 2100HT as directed by theconcerned department |
| 14 | Providing SOFA SET of MODEL: CONVERSE 2-SEATER SOFA as directed by the concerned department |
| 15 | Providing SOFA SET of MODEL: CONVERSE 3-SEATER SOFA as directed by the concerned department |
| 16 | Providing U-SHAPED FST CONFERENCE TABLE of SIZE: : 11550W X 2400D X 750HT, MAIN TABLE - (1 NO OF 2400W X 750D X 750HT) and SIDE TABLE - (12 NO OF 1800W X 7500D X 750HT)as directed by the concerned department |
| 17 | Providing Executive Vaivabhi Mid back revolving Chair as directed by the concerned department |
| 18 | Providing Executive Revolving Chair with Tilt Mechanism as directed by the concerned department |
| 19 | Provodong RV Collection Table as directed by the concerned department |
| 20 | PVC Panel |
| 21 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A |
| 22 | Group B |
| 23 | Group C |
| 24 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 25 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 26 | 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 27 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.3 Module (100mmX75mm) |
| 28 | 6 Module (200mmX75mm) |
| 29 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required5/6 A Switch |
| 30 | 15/16 A Switch |
| 31 | 3 pin 5/6 A socket outlet |
| 32 | 6 pin 15/16 A socket outlet |
| 33 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 34 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 35 | SITC 2.0 Tr Fixed speed Cassette type Air Conditioner |
| 36 | SITC 3.0 Tr Fixed speed Cassette type Air Conditioner |
| 37 | ITC 3.0 Tr Fixed speed Casstte AC |
| 38 | ITC 2.0 Tr Fixed speed Casstte AC |
| 39 | SITC Copper refrigerant pipe |
| 40 | SITC of Drain pipe |
| 41 | ITC of 1.5 Ton capacity Split AC |
| 42 | Dismantling and shifting charge of 1.5 Ton capacity Split AC |
| 43 | supplying, fitting & fixing of ACP LED Digital Sign Board size (41 ft x 2.5 ft) including all accessories as required and as directed by the department. |
| 44 | Supplying with fitting and fixing of Circular 12 W LED Surface/Recesse Type ceiling light including making necessary connection as per direction of department. (Philips or equivalent make) |
| 45 | Supplying with fitting and fixing of COB 3 W LED Recesse Type ceiling light including making necessary connection as per direction of department. (Philips or equivalent make) |
| 46 | Supplying with fitting and fixing of COB 2 W LED Recesse Type ceiling light including making necessary connection as per direction of department. (Philips or equivalent make) |
| 47 | Supplying with fitting and fixing of LED Wall light including making necessary connection as per direction of department. (Philips or equivalent make) |
| 48 | Supplying with fitting and fixing of LED Strip light including making necessary connection as per direction of department. 240 LED Strip (Orient make) |
| 49 | Supplying with fitting and fixing of 10 AMP Adapter including making necessary connection as per direction of department. (Orient make) |
| 50 | Supplying with fitting and fixing of LED Strip light including making necessary connection as per direction of department. 60 LED Strip (Orient make) |
| 51 | Supplying with fitting and fixing of 2 AMP Adapter including making necessary connection as per direction of department. (Orient make) |
| 52 | Supplying with fitting and fixing of Single Phase Modular A/C Starter including making necessary connection as per direction of department. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender