Tender For Re-Organization Of 33Kv Ohtl Feeder No 1 ,2, 3 & 4 At 132 Kv Substation For Making Arrangement For Charging/Energize Newly Erected Dcds Transmission Line For Providing Power Supply To Under Construction 2 X 10 Mva, 33/6.6Kv Substation Unde
Tender Overview
Project Description
Tender for Re-Organization Of 33Kv Ohtl Feeder No 1 ,2, 3 & 4 At 132 Kv Substation For Making Arrangement For Charging/Energize Newly Erected Dcds Transmission Line For Providing Power Supply To Under Construction 2 X 10 Mva, 33/6.6Kv Substation Under Dipka Area.
BOQ
| Sl. No. | Item Description |
| 1 | Erection of 13/16 mtr. long steel tubular poles including excavation of pole pit as per site conditions and grouting by cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) etc (0.38 cum each pole) |
| 2 | Supplying & erection of galvanised stay set for 33 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle (20 mm X 600 mm), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required |
| 3 | Stringing of Panther conductor (all 3 Nos. conductor), including un-coiling from drum at stockyard, loading onto departmental vehicle, transporting to site and unloading, laying of conductor along route, stringing and binding on insulators and jumpering etc. as required. Route length about 80 mtr x 4 feeder + sag |
| 4 | Anti climbing device and danger board |
| 5 | Laying & stringing of rabbit conductor as earth continuity wire. |
| 6 | Painting & numbering etc (pole & brackets with Red oxide & aluminium paint) |
| 7 | Fabrication & erection of MS Channel/Angle/Flat for bracket or clamp as per requirement. |
| 8 | Supplying and fixing of MS nut, bolt of different size as required |
| 9 | Erection of cradle guarding wire between the span including binding of guard wire. |
| 10 | Supplying & erection of 11 KV disc insulator for 33 KV overhead lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required |
| 11 | Dismantling of pole with bracket etc. |
| 12 | Dismantling of overhead lines comprising of copper/aluminium overhead conductor, GI wire, cross arms, insulators etc as required |
| 13 | Scope of work: Dismantling of existing conductor from tower & gantry (132KV Substation) of each feeder one by one, laying & erection of the same/ new conductor from other gantry to same tower with insulator, hardware, nut bolt & conductors damper etc as required for each feeder (Conductor will be supplied departmentally). Note: The estimated cost put to tender is excluding the PF and Pension Component. These statutory payment as applicable shall be reimbursed to the contractor on production of proof of payment limited to the maximum likely number of workmen to be deployed per day is 10 nos. |
| 14 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender