Tender For Construction Of Krishak Bandhu Kendra At Tepania Under Tepania Agri Sub-Division, Gomati Tripura./ S.H: Providing Internal Electrification
Tender Value
3.73 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
6 days left
EMD
7474
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gomati → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Krishak Bandhu Kendra At Tepania Under Tepania Agri Sub-Division, Gomati Tripura./ S.H: Providing Internal Electrification
BOQ
| Sl. No. | Item Description |
| 1 | Electrical work : |
| 2 | Wiring for light & fan point with 2 X 1.5 sq. mm. PVC insulated copper conductor cable (FR) in PVC casing and capping complete with PVC surface modular switch board with cover plate and 10A. modular switch including connection etc. as required a) Short Point :- |
| 3 | b) Medium point:- |
| 4 | c) Long point:- |
| 5 | Providing and fixing of 3 pin 5/6 amps plug point with Piano type 5/6 amps switch and socket with cover plate including connection with 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on PVC switch board, earthling the 3rd pin etc. as required. |
| 6 | Providing and fixing of 3/6 pin15/16 amps plug point with piano type 15/16 amps switch and socket including connection with 2x2.5 sq. mm PVC insulated Copper conductor cable (FR) on switch board, earthing the 3rd pin etc. as required |
| 7 | Wiring for Circuit/Sub-main wiring with the following sizes PVC insulated copper conductor cable (FR) in PVC casing capping etc. as required:- a) 2 X 1.5 sqmm |
| 8 | 3 X 1.5 sq mm |
| 9 | 2 X 2.5 sq mm |
| 10 | c) 2 x 4.0sqmm |
| 11 | 2 X 6 sq mm |
| 12 | Wiring for Circuit /Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping / conduit in recess /surface including connection etc. as required:- 2 X 1.5 sq mm |
| 13 | 2 X 4 sq mm |
| 14 | 1 X 6 sq mm |
| 15 | Supplying and laying of following size XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required 3 core 4 sq mm |
| 16 | Supplying and fixing of the following sizes switch boards(on surface) etc. as required. 1-2 module Plastic switch board |
| 17 | Supplying and fixing of the following sizes wooden switch boards with 3mm thick bakelite cover etc. as required. 254mm x 300mm (10\\" X 12\\") :- |
| 18 | 300mm x 380mm (12\\" X 15\\") :- |
| 19 | Supplying and fixing of the following sizes modular type cover plates for plastic modular switch boards etc. as required. 1-2 module :- |
| 20 | Supplying and fixing of Copper terminal ends (LUGS) - long barrel of following sizes: - 4 sq mm |
| 21 | 6 sq mm |
| 22 | Supplying and fixing of the following electrical accessories including necessary connection etc. as required. 5 step Modular fan regulator (2M) |
| 23 | 32 amps DP Kitkat switch |
| 24 | 3/6 pin 20 amps socket outlet (2M):- |
| 25 | 16/20 amps one way SP Switch |
| 26 | Angle/batten holder |
| 27 | Ding Dong Call bell |
| 28 | Bell Push SP (1M) |
| 29 | 3mm thick bakelite sheet |
| 30 | Blank Plate |
| 31 | 19 mm X 19 mm size PVC \\"L\\" flat Bit.(LMR) |
| 32 | 20 mm dia. Heavy PVC gland .(LMR) |
| 33 | 20 mm dia. Heavy PVC flexible Pipe .(LMR) |
| 34 | 20/25 amps single phase motor starter switch |
| 35 | Supplying and installation of Bus bar chamber of the following ratings and sizes made of steel sheet enclosure with all accessories including necessary connection etc. as required:- 63 amps 415 volts four strip Copper busbar chamber 4 ways of size (330mmx280mmx100mm) |
| 36 | 32 amps 415 volts four strip Copper busbar chamber 4 ways of size (300mmx240mmx80mm) |
| 37 | Supplying and installation of Switch disconnector fuse unit (main switch) of the following ratings with all accessories in existing panel board including necessary connection etc. as required:- 63 amps 415 volts TPN main switch (Rewireable) |
| 38 | 32 amps 240 volts DP main switch (rewireable):- |
| 39 | Supplying and installation of rewireable fuse unit (kitkat) of the following ratings in existing main switch/panel board including necessary connection etc as required:- 63 amps kitkat porcelain fuse unit with base(rewireable):- |
| 40 | 32 amps kitkat porcelain fuse unit with base(rewireable):- |
| 41 | Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/ Isolator / RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required. 2 way SPN MCB DB (Single door):- |
| 42 | (2+6) / 8 way SPN MCB DB (double door):- |
| 43 | (2+10) / 12 way SPN MCB DB (double door):- |
| 44 | Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as required:- 6 to 32 amps DP MCB:- |
| 45 | Supplying & installation of isolators of following ratings in the existing MCB DB including connection etc as required:- 40 amps DP isolator:- |
| 46 | Supplying and fixing of MS frame made of (25mm x 25mm x 5mm) MS angle with necessary support by (40mm x 6mm) MS flat and 12 mm thick marine plywood on top, grouted on wall with 4 nos legs (25mmx25mmx5mm MS angle 20 cm long) finished with red oxide and 2 coat synthetic enamel paint including necessary cc work, mending the damages & painting etc as required:-Supplying and fixing of MS frame made of (25mm x 25mm x 5mm) MS angle with necessary support by (40mm x 6mm) MS flat and 12 mm thick marine plywood on top, grouted on wall with 4 nos legs (25mmx25mmx5mm MS angle 20 cm long) finished with red oxide and 2 coat synthetic enamel paint including necessary cc work, mending the damages & painting etc as required:- |
| 47 | Supplying and fixing of following surface mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):- Surface mounted round shaped 12 watt LED downlight with integral driver and high quality polycarbonate diffuser:- |
| 48 | 36 watt LED street light fixture with integral driver and secondary lens (IP 66):- |
| 49 | Supplying and fixing of following LED retrofit bulbs / lamps B.C.Type including necessary connection etc. as required:- 14/15 watt LED retrofit CFL |
| 50 | 20 watt LED retrofit Tube lamp with polycarbonate body and aluminium heatsink :- |
| 51 | Supplying & fixing of 1200 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod,canopies,shackles, 3 nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated Copper conductor cable(FR) (ISI marked, BEE 1 star/minimum service value 4.0 m3/min/W) : - |
| 52 | Supplying & installation of 300 mm sweep metalic body exhaust fan including connection etc as required:- |
| 53 | Supplying & installation of shutter for 225/230/300 mm sweep metalic body exhaust fan in the existing hole as required:- |
| 54 | Making different sizes of hole in the wall for fixing of exhaust fan including finishing the same with cement plastering and painting etc as required. |
| 55 | Supplying & fixing of G.I. pipe (medium gauge) bracket fabricated at suitable angle for fixing of outdoor light on wall/ RCC base with necessary MS clamp, nut, bolts & painting etc as required:- 25 mm dia |
| 56 | Earthing with GI earth plate 600 mm x 600 mm x 3 mm thick i/c accessories and providing masonry enclosure with CI cover plate Size 12\\"x 12\\" having locking arrangement, along with 20 mm dia (medium gauge) watering pipe including CC work etc as required:- |
| 57 | Extra for using salt (12 kg) and charcoal (96kg) for plate earth electrode as required. |
| 58 | Proving and fixing / Drawing 4.06 mm dia (8 SWG) Copper wire on surface or in existing G.I / PVC / Polythene pipe for earthing as required. |
| 59 | Providing and laying 15mm dia(medium gauge) G.I. pipe for drawing of 4.06mm (8SWG) dia G.I./ Copper wire for earth connection from earth electrodes etc as required. |
| 60 | Supplying of ‘U’ clamp made with 40mm x 6 mm MS flat and fixing with necessary fasten nuts including painting etc as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender