Tender For Surandai Municipality Providing Construction Of Sintex Tank At 10 Ward Near By Hindu Nadar Marriage Hall
Tender Value
3 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
11 days left
EMD
3000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tenkasi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Surandai Municipality Providing Construction Of Sintex Tank At 10 Ward Near By Hindu Nadar Marriage Hall
BOQ
| Sl. No. | Item Description |
| 1 | Earth work Open excavation by Mechanical Means for Open Earthwork in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers. |
| 2 | Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers - Mixing by mechanical means |
| 3 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 For column |
| 4 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 For Slab |
| 5 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - |
| 6 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. |
| 7 | Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 8 | Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 9 | Refilling the excavated earth in layers of not more then 15 cm thick well rammed watered and consolidated etc., complete with standared specification |
| 10 | Provision for water supply arrangements 50mm Dia GI Union |
| 11 | 50mm Dia GI Coupling |
| 12 | 50mm Dia GI Elbow |
| 13 | 50mm Dia GI Tee |
| 14 | Waste Not Tap |
| 15 | Supply and delivery and fixing of HDPE tankas per IS 12701 / 1996 including loading,unloading, transportation and labourcharges for fixing of the GI pipes andspecials for pipe connection works includingcutting, threading and fixing charges etc.,2000 lit |
| 16 | Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9\\" X 43/8\\"X 2 3/4\\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 17 | G I PIPES (MEDIUM) AS PER IS 1239/PART I/2004 50mm |
| 18 | SINGLE PHASE SUBMERSIBLE PUMPSET AS PER IS 8034/2002WITHOUT PANEL BOARD Supply and delivery of clear water vertical wet type submersible pump conforming to IS8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPMagainst head of water column due to all causes. The pump shall be with stainless steel shaftand dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pumpbowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two polesuitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase230 V+/- 10 %,50 HZ +/-5 % 20X150 lpm |
| 19 | Labour charges for the erection of submersiblepumpset in borewell/openwell including fixingand jointing submersible cable with properclamps upto the starter to required depth andalso fixing of riser pipes to the required depthvalves erection clamps, pressure gauges uptothe exterior wall of pump room and erectionof panel board consisting of TPICN switchesstarter, Voltmeter, Ammeter, three pilot(indicating) lamps capacitor single phasingpreventor, water level guard and laying andjointing the cables and twin earthing as per IErules etc., complete and testing the pumpsetand trail run for 10 days. Upto 5 HP |
| 20 | HDPE PIPES - PE 100 AS PER IS 4984/2016 |
| 21 | Barricading work (Where, there is less trafficareas and broader roads etc.) for laying ofpipe line using casurina poles at 1.50mcenter to center (8cm to 10cm dia and 1.80mheight) vertical with horizontal poles in threerows including painting the vertical poles inthe road facing sides with ready mix paint,tying the vertical and horizontal poles withcoir rope including fixing charges and fixing75mm dia reflectors including earth workexcavation for fixing vertical posts and finallyremoving and stacking the materials safelyfor further use etc., complete and as directedby TWAD Board officers. |
| 22 | FULLY AUTOMATIC AIR BREAK STAR DELTA STARTER WITH SINGLEPHASE PREVENTOR WITH AMMETER CONFIRMING TO IS 13947, IEC60947-1 WITH AUTO RESTART FACILITY FOR PUMP HOUSES WHEREPANEL BOARDS ARE AVAILABLE |
| 23 | Conducted of geological survey in deep borewell |
| 24 | Drilling of 150 mm vertical deep bore well in hard rock area to any required depth an instruction by dept. officer assembly in drilled works including Transporting charges to supporting vertical etc complete. |
| 25 | Supply of 150mm PVC pipe 6kg pr including cost, conveyance to site and all other incidental charges etc complete. |
| 26 | PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLECONFORMING TO IS 694/1990 AND AS AMENDED THEREAFTER 2.5 sq.mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender