Tender For Renovation Works To 220/132/33 Kv Grid Sub-Station Control Room At Budhipadar (Provision Of Inside Plaster, Painting, Vitrified Tile Flooring & Sanitary Installations)
Tender Value
23.57 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
14 days left
EMD
23600
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Balangir → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Works To 220/132/33 Kv Grid Sub-Station Control Room At Budhipadar (Provision Of Inside Plaster, Painting, Vitrified Tile Flooring & Sanitary Installations)
BOQ
| Sl. No. | Item Description |
| 1 | Providing Supplying, Fitting, Fixing Struss/ MS Post etc made with M.S. Angle, Chennel, Flat to suitable dimension at the occasion at the site fabricated as per approved design and drawing with cutting, turning, welding, including cost conveyance, taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge. |
| 2 | Providing and supplying for Roofing Works using Galvanised-Colored-Corrogated-Iron- (GCCI) Sheets including hoisting, lowering, laying and placing the iron sheets in proper position for fitting and fixing over roof truses, rafter, purlins with drilling holes in wind ties and fixing of ridges, valleys, wind ties etc complete by means of fittings and fixtures like J/L hooks nuts. bolts, bitumen/MS washer and sealing materials like Pitch, coaltar, putty, paint etc sealed around the hooks in the holes etc complete in all respect including cost, conveyance, taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respects as per the direction of the Engineer-in-charge. |
| 3 | Providing for Laying PVC (SWR) Pipes and Sepcials in House Plumbing for Rain water disposal/ Vent pipe of the following diameters for all classes with fittings and specials to walls jointed with approved quality solvent cement by non-heat application method and with nails bobbins and wooden plugs etc as per specifications. |
| 4 | (A) 4\\" (110mm) dia. PVC Pipe (SWR) |
| 5 | Provdiding for Laying and Plumbing PVC (SWR) Fittings and Specials in following category in Sewerage System pipe line assembly duly fitted and fixed to walls jointed with approved quality solvent cement by non-heat application method and also with nails bobins and wooden plug etc complete. |
| 6 | (A) PVC Plain Bend - 4\\" dia. |
| 7 | Providing Primming one coat with primer over plastered surface of approved quality and make painted and finished after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge. |
| 8 | (A) GROUND FLOOR |
| 9 | (B) FIRST FLOOR |
| 10 | Providing for Weather coat two coats of approved quality, make and shade washed and finished smooth over exterior surfaces of wall etc after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge. |
| 11 | (A) GROUND FLOOR |
| 12 | (B) FIRST FLOOR |
| 13 | Providing Painting two coats with Synthetic Enamel Paint over one coat of primer to iron works of approved quality, make and shade, painted and finished smooth after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge. |
| 14 | (A) GROUND FLOOR |
| 15 | (B) FIRST FLOOR |
| 16 | Removing Cement/ lime plaster from walls, ceiling etc. including racking out the joints up to 12mm deep with removing & disposing the debris etc within 50mtr. lead. Including cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc complete in all respects as per the direction of the Engineer-in- charge. |
| 17 | (A) GROUND FLOOR |
| 18 | (B) FIRST FLOOR |
| 19 | 12mm thick Sand and Cement plaster of proportion (1:6) finished smooth over smooth surfaces of brick masonry walls including racking out the joints with watering and curing etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 20 | (A) GROUND FLOOR |
| 21 | (B) FIRST FLOOR |
| 22 | Providing Close Deep Chipping on Mosaic surface for receiving Vitrified Tile fixing,with cleaning the same for receiving cement plaster etc including removing & disposing the debris etc. within 50mtr. Lead including cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respects as per the direction of the Engineer-in- charge. |
| 23 | Dismantling and Removing Marble Chips Dado and Skirting from walls with racking out the joints up to12mm deep including stacking the useful materials for reuse and removing & disposing the debris etc within 50mtr lead including cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respects as per the direction of the Engineer-in- charge. |
| 24 | Providing Floor Tiling works in floors, treads, on steps and landing using Vitrified Tiles of size 600mm X 600mm of approve make & quality conforming to IS: 13755 laid on 3mm thick bed with application of polymer modified quick set cement based water resistence adhesive conforming to IS : 15477 filling joints with white cement of approved quality mixed with pigments to match the shade of the tiles laid to proper slope etc including rubbing and polishing complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 25 | Providing Wall Tiling works in Dado,Skirting,rises of steps and vertical face of wall using Ceramic Tiles of premium grade and standard size of approve make & quality fixed over 12mm thick cement mortar (1:3) and jointed with cement slurry mixed with pigments to match the shade of the tiles,finishing with white cement etc including rubbing and polishing complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 26 | Ground Floor |
| 27 | First Floor |
| 28 | Scraping old paint from old painted surfaces of wall /wood/iron with scrapers, sand papering and washing with soap or soda water with removing & disposing the debris etc. within 50mtr lead including cost, conveyance of all materials and labour with T&P, equipments, accessories, scaffolding etc and provision for all arrangements required for the works etc. complete in all respects as per the direction of the Engineer-in- charge. |
| 29 | Ground Floor |
| 30 | First Floor |
| 31 | Providing for Finishing surfaces of wall /ceiling with cement/water based wall putty of approved quality and make and finished smooth and even surface to receive painting etc complete including cost, conveyance taxes of all materials and cost conveyance, of all labour with T&P, equipments and accessories and provision for all arrangements for scaffolding, staging etc required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 32 | Ground Floor |
| 33 | First Floor |
| 34 | Providing Painting two coats with plastic emulsion paint of approved quality, make and shade washed and finished smooth over surfaces of wall and ceiling after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge. |
| 35 | Ground Floor |
| 36 | First Floor |
| 37 | Supplying and fixing of Armstrong fine fissured False Ceiling System on 24mm flange stitched suspension prelude xl gris system having main Tee 3000mm long X 32mm web height X 24mm wide Tee sections. The main runner is to be fixed with 2mm thick pre-stretched GI wire with Soffit Cleat and GI Rawl plug inserted on the main roof to be fixed at 1200mm C/C.The Last hanger at the end of each main runner should not be greater that 450mm from the adjacent wall. The main Runner will be at the distance of 1200mm C/C. The flush fitting 1200mm X 30mm X 24mm wide Cross Tee Sections, with precesion stub end is to be clicked fit in betweeen the main Tee at a distance of 600mm to make a module of 1200mm X 600mm, another cross Tee with precesion stub stop end of size 600mm X 27mm X 24mm is to be click fitted at 1200 Sections parallel to main Tee at 600mm C/C to make a square grid of 600mm X 600mm, or base frame material click end shouldbe made of old rolled Tee steel components and coated with hot deep Galvanized Tee ( 170 gm/sqm, Zinc layer meeting the requirements of BS 2989.) It should have a capping of material coated with baked polyester. The peri meter trim of size 19mm X 19mm white colour secured at 450mm C/C with provision for accomodating ceiling illumination system etc complete including cost, conveyance taxes of all materials and cost conveyance, of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 38 | Providing for Illuminating Appliances in false ceiling works with Ceiling mounted 40 Watt LED Pannel fittings of Havels/Syska/ Philips make with necessary electronic, reflector etc, power connection complete for operating/working perfectly duly fitted and fixed with Aluminium false ceiling grid suitable to size including cutting making etc including cost, conveyance taxes of all materials and cost conveyance, of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 39 | Suppying all labour and T&P for Wiring to Recess light points with 1.5 sqmm single core copper wire of approved quality, including cost, conveyance taxes of all materials and cost conveyance, of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 40 | Providing Supplying, Fitting, Fixing M.S. Shutter and Grill Doors etc made with M.S. Angle, Chennel, Flat to suitable dimension at the occasion at the site fabricated as per approved design and drawing with cutting, turning, welding, providing holes/grooves as per necessity, fitted with locking arrangements, handles etc, dully fixed at the opening in proper position with clamps well embedded in masonry walls/ RCC members with C.C.(1:1½ :3), finished with 12mm CP(1:3) etc complete including cost conveyance, royalty, taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge. |
| 41 | Dismantling earthen wire Squatting PAN (Odisha Pan) etc, removing & disposing the debris etc. within 50 mtr lead and mending good to the damages to the floors etc complete including cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respects as per the direction of the Engineer-in- charge. |
| 42 | Dismantling and Removing Old Damaged Floor Tile including stacking the useful materials for reuse and removing & disposing the debris etc. within 50mtr lead including cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respects as per the direction of the Engineer-in- charge. |
| 43 | Dismantling and Removing Old Tiled Cladding from walls with racking out the joints up to12mm deep etc including stacking the useful materials for reuse and removing & disposing the debris etc. within 50mtr lead including cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respects as per the direction of the Engineer-in- charge. |
| 44 | Providing and Supplying for Cutting Grooves in pucca floor and walls for providing concealed pipe wiring with fittings for water supply line and making good to the damages with CC(1:3:6) using 12 mm size HBG stone chips finished with 12mm CP(1:3) and punning as per necessity etc complete including cost conveyance, royalty, taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the PH Specification and direction of the Engineer-in- charge. |
| 45 | Providing and Supplying for Plumbing & laying Un-plastisized PVC (UPVC) pipe (Confirming to IS-4985 of Class-IV-10 Kg per Sq.Cm) of approved make and quality for internal water supply in house plumbing with the following nominal dia with fittings, clamps etc firmly fixed to walls ,floors and ceiling etc with making good to the damages happened to surfaces etc including cost conveyance, royalty, taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the PH Specification and direction of the Engineer-in- charge. |
| 46 | UPVC pipe- 20mm dia (Oriplast/Jaiswal/ Finolax) |
| 47 | Providing Floor Tiling works in floors, treads,on steps and landing using Ceramic ( Anty-skid type) Tiles of premium grade and standard size of approve make & quality laid over a bed of 25mm thick cement mortar (1:1) and jointed with cement slurry mixed with pigments to match the shade of the tiles, finishing with white cement etc including rubbing and polishing complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 48 | Ground Floor |
| 49 | First Floor |
| 50 | Providing and Supplying for Fitting and Fixing of porceiling / PVC items in sanitary use of the following type of Approved make and quality as mentioned provided in proper position dully connected to water supply and sanitary system firmly fixed to walls ,floors and ceiling etc using clamps, brackets, nails, screws, bobins etc as required for plumbing the fittings and specials etc and making good to the damages happened to surfaces including cost conveyance, royalty, taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the PH Specification and direction of the Engineer-in- charge. |
| 51 | (A) 22” X 16” Wash Hand Basin (Parryware/ Bell)- with all necessary fittings for perfect functioning |
| 52 | (B) Odisha Pan (Parryware / Bell) with all necessary fittings for perfect functioning of 23\\"x 17\\"size |
| 53 | ( C) Commode (Anglo Indian Water Closet) |
| 54 | (D) Standing Urinal (Parryware/ Bell Make) |
| 55 | (E ) Squating Urinal (ladies Urinal) |
| 56 | (F) 12.5 Ltr Capacity PVC Lower Level Cistern (Parryware/ Bell) with all necessary fittings for perfect functioning |
| 57 | Providing and Supplying for Fitting and Fixing of Toilet Accessories and Appliances (CP fittings) in sanitary use of the following type of Approved make and quality as mentioned provided in proper position dully connected to water supply and sanitary system firmly fixed to walls ,floors and ceiling etc using clamps, brackets, nails, screws, bobins etc as required for plumbing the fittings and specials etc and making good to the damages happened to surfaces including cost conveyance, royalty, taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the PH Specification and direction of the Engineer-in- charge. |
| 58 | Mirror with hard board & screw ( Belgium/ Reliance)- 5mm thick- 24” X 18” size |
| 59 | CP Brass Ball Bearing Shower with Arm (Plaza/Zigma/Cizor/Corona )- ½ ” size |
| 60 | CP Brass Towel Rail ( Plaza/Zigma/Cizor/Corona)- ¾” X 24” size |
| 61 | CP Brass Soap Holder (Plaza/Zigma/Cizor/Corona) |
| 62 | CP Brass Glass Self with glass slab (Plaza/Zigma/Cizor/Corona)- 24” X 5” size |
| 63 | CP Brass Long Body Bib Cock (Plaza/Zigma/Cizor/Corona)- ½ ” size |
| 64 | CP Brass Short Body Bib Cock (Plaza/Zigma/Cizor/Corona)- ½ ” size |
| 65 | CP Brass Consealed Stop Cock (Plaza/Zigma/Cizor/Corona )-½ ” size |
| 66 | CP Brass Angle Stop Cock (Plaza/Zigma/Cizor/Corona )- ½ ” size |
| 67 | CP Brass Gully Grating (Plaza/Zigma/Cizor/Corona)- 4” size |
| 68 | Providing fitting and fixing of Aluminium Composit Pannel (ACP) door for bath and toilets made out of Aluminium Section No. 9835 as Horizontal & vertical members placed for framing the styles including top, bottom & lock rail and shuttering with 3mm thick Aluminium Composit Pannel sheet (ACP sheet) fitted and fixed to required size to suit the drawing & design of the opening etc complete including cost, conveyance taxes of all materials and cost conveyance, of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 69 | Filling in Foundation and Plinth with sand well watered and rammed, laid in layers not exceeding 150mm in thickness suitable to drawing and design compacted to required depth etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineering charge. |
| 70 | Cement Concrete work of proportion (1:3:6) in bed of foundation / basement of floor etc. using 40mm size hard black crusher broken granite stone metal of approved quality and from approved quarry lead in layers not exceeding 150mm thick compacted to required defth suitable to drawing and design for the site with watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 71 | Cement Concrete work of proportion (1:2:4) in floor etc. as using 12mm size hard black crusher broken granite stone chips of approved quality and from approved quarry lead in layers not exceeding 150mm thick compacted to required defth suitable to drawing and design for the site with watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineering charge. |
| 72 | Providing Painting two coats with Synthetic Enamel Paint over Masonry/Concrete Surface of approved quality, make and shade, painted and finished smooth after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge. |
| 73 | Dismantling Doors/Windows/ Ventilators and removal of bolts, nuts,frames, hinges, fastenings etc including stacking the useful materials for reuse and removing & disposing the debris etc within 50mtr lead including cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respects as per the direction of the Engineer-in- charge. |
| 74 | Cleaning & grubbing land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm removal of stumps of trees cutting earlier and disposal of unserviceable materials and stacking of serviceable materials to the used or auctioned upto a lead 1000mtrs including removal & disposal of top organic soil not exceeding 150mm in thickness including cost, conveyance of all labour with T&P and all arrengements required for the work etc complete as per the direction of E.I.C. |
| 75 | Dismantling and Removing Cement Concrete including stacking the useful materials for reuse and removing & disposing the debris etc. within 50 mtr lead including cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respects as per the direction of the Engineer-in- charge. |
| 76 | Dismantling and Removing Brick/Stone Masonry in cement/lime mortar under /above 3mtr height including stacking the useful materials for reuse and removing & disposing the debris etc. within 50mtr lead including cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respects as per the direction of the Engineer-in- charge. |
| 77 | Earthwork Excavation in Foundation trenches in all kinds of soils with dressing and leveling the bed and sides Suitable to the drawing and design and depositing the excavated soil within initial lead of 50 mtr. and initial lift of 1.5 mtr Including cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 78 | Brick masonry work with cement mortar (1:6) in Foundation and Plinth using Fly-Ash bricks of size 23cm X 11cmX 8cm having crushing strength not less than 75 kg/Sqcm with dimensional tolerance + 2%and immersing the bricks for six hours before use in masonry work with splays, cutting, corbelling, chamfering, circular moulding and similar such type of works , watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 79 | Providing Reinforced Cement Concrete (RCC) work of grade M-20 (1:1 ½ :3) in Plinth Band using 12mm (½ inch) size hard black crusher broker granite stone chips of approved quality from approved quarry including batching, grading, mixing in a mechanical mixture, hoisting, lowering, laying and compacting concrete with appropriate vibrator for casting- in- situ suitable to the drawing and design of the structural member at site having compressive strength not less than 200 kg/sqcm in 15cm cubes and test conducted after 28 days of curing as per test conducted in accordance with the code IS-456 and IS-516 in work test with watering and curing for 28 days to attain the required strength as mentioned including cost of centering and shuttering but excluding cost of re-enforcing materials like MS rod, tor-steel,binding wire and labour charges for making & tying the re-enforcing grills and including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 80 | Brick masonry works with cement mortar (1:6) in Super Structure using Fly-Ash bricks of size 23cm X 11cmX 8cm having crushing strength not less than 75 kg/Sqcm with dimensional tolerance + 2% and immersing the bricks for six hours before use in masonry work with splays, cutting, corbelling, chamfering, circular moulding and similar such type of works , watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 81 | 16mm thick Sand and Cement plaster of proportion (1:6) finished smooth over rough surfaces of brick masonry walls including racking out the joints with watering and curing etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 82 | Providing Reinforced Cement Concrete (RCC) work of grade M-20 (1:1 ½ :3) in Lintel using 12mm (½ inch) size hard black crusher broker granite stone chips of approved quality from approved quarry including batching, grading, mixing in a mechanical mixture, hoisting, lowering, laying and compacting concrete with appropriate vibrator for casting- in- situ suitable to the drawing and design of the structural member at site having compressive strength not less than 200 kg/sqcm in 15cm cubes and test conducted after 28 days of curing as per test conducted in accordance with the code IS-456 and IS-516 in work test with watering and curing for 28 days to attain the required strength as mentioned including cost of centering and shuttering but excluding cost of re-enforcing materials like MS rod, tor-steel,binding wire and labour charges for making & tying the re-enforcing grills and including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 83 | Providing Reinforced Cement Concrete (RCC) work of grade M-20 (1:1 ½ :3) in Chajjasusing 12mm (½ inch) size hard black crusher broker granite stone chips pf approved quality from approved quarry including batching, grading, mixing in a mechanical mixture, hoisting, lowering, laying and compacting concrete with appropriate vibrator for casting- in- situ suitable to the drawing and design of the structural member at site having compressive strength not less than 200 kg/sqcm in 15cm cubes and test conducted after 28 days of curing as per test conducted in accordance with the code IS-456 and IS-516 in work test with watering and curing for 28 days to attain the required strength as mentioned including cost of centering and shuttering but excluding cost of re-enforcing materials like MS rod, tor-steel,binding wire and labour charges for making & tying the re-enforcing grills and including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 84 | 12mm thick Sand and Cement plaster of proportion (1:4) including neat cement punning and two coats of Bitumen painting over top of wall with watering and curing etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 85 | Providing Reinforced Cement Concrete (RCC) work of grade M-20 (1:1 ½ :3) in Roof Slab using 12mm (½ inch) size hard black crusher broker granite stone chips pf approved quality from approved quarry including batching, grading, mixing in a mechanical mixture, hoisting, lowering, laying and compacting concrete with appropriate vibrator for casting- in- situ suitable to the drawing and design of the structural member at site having compressive strength not less than 200 kg/sqcm in 15cm cubes and test conducted after 28 days of curing as per test conducted in accordance with the code IS-456 and IS-516 in work test with watering and curing for 28 days to attain the required strength as mentioned including cost of centering and shuttering but excluding cost of re-enforcing materials like MS rod, tor-steel,binding wire and labour charges for making & tying the re-enforcing grills and including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 86 | Providing and Laying Plastic Felt as water proofs over roof surface with polymeric bituminous membrane of 2.25 kg/sqm and of 2mm thick consisting of layers having center core of 20 microns thermophisible high molecular high density polythene CHMHDPE filling of grade 250M including priming the surface with bituminous primer @ 0.30kg.sqm and providing a coat of hot blown bitumen of 1.32kg/sqm, then applying and laying Plastic felt membrane with adhered to blown bitumen of 85/25 or 90/15 grade and covered with a layer of hot blown bitumen @ 1.20kg/ sqm etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 87 | Providing Supplying, Fitting, Fixing M.S. Grills/Grill Gates with Iron frame etc made with M.S. Angle, Chennel, Flat and Iron Sheet to suitable dimension at the occasion at the site fabricated as per approved design and drawing with cutting, turning, welding, providing holes/grooves as per necessity, fitted with locking arrangements, handles etc, dully fixed at the opening in proper position with clamps well embedded in masonry walls/ RCC members with C.C.(1:1½ :3), finished with 12mm CP(1:3) etc complete including cost conveyance, royalty, taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the PH Specification and direction of the Engineer-in- charge. |
| 88 | Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fittings and fixtures. |
| 89 | Providing and fixing ISI marked 35mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete. |
| 90 | Providing 2.5cm (25mm) Grading Concrete in cement concrete (1:2:2) using 6mm size hard black crusher broken granite stone chips of approved quality and from approved quarry including batching ,mixing, blending etc for preparing the concrete with lowing, laying, hoisting etc for applying over RCC roof surface to proper grade and slope mixed with water Proofing compound as per necessity, compacted and finished smooth to get required thickness with watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge. |
| 91 | Providing and Making Re-enforcing Grills for RCC works with MS rod,tor-steel of required diameter and binding wires of 18 to 20 gauge with straightening, cutting, bending, binding, tying the grills and placing in position suiting to the form-work for RCC structural member as per the drawing and design at site including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineering charge.(Payment shall be made on weight of MS rod/tor-steel only and no separate payment for binding wires) |
| 92 | Providing and Supplying for Removal and Disposal of surplus earth, debries, garbages etc with mechanical means like transportation by Truck /Tractor with loading and unloading of the materials to a distance up to 5 Kms etc complete including cost of Transportation charges and labour with T&P for collecting, loading, unloading, removal & disposal in all respects as per the direction of the Engineer-In-Charge |
| 93 | CESS 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender