Tender For Re-Construction Of Broken Portion Boundary Wall At 220/33Kv Optcl Grid Sub-Station , Rengali.
Tender Value
41.72 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
2 days left
EMD
41800
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sambalpur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Re-Construction Of Broken Portion Boundary Wall At 220/33Kv Optcl Grid Sub-Station , Rengali.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Aug-2026 | corrigendum1 | Technical Bid | 25-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Clearing heavy jungles including uprooting stumps of trees and trees above 1m girth and thick bushes including bamboo premeasurement as per the direction of the EIC. |
| 2 | Supplying all labour for removal of cement plaster including racking out joints 12 mm deep and removal of debris within 50m initial lead including cost,conveyance,royalties & taxes of all labour with T & P required etc complete as per direction of Engineer in charge |
| 3 | Supplying all labour for dismantling brick masonry including stacking of useful material for reuse and removal of debris within 50m initial lead including cost,conveyance,royalties & taxes of all labour with T & P required etc complete as per direction of Engineer in charge |
| 4 | Earthwork in excavation in hard soil on foundation trenches in all kinds of soil including moorum stony earth and earth mixed with boulder except sheet rocks and boulders requiring blasting including dressing and leveling the bed up to the required depth and depositing the excavated materials with all leads and lifts T&P shoring and shuttering , dewatering if required etc complete including cost,conveyance,taxes of all labour with T&P required etc complete as per the direction of the Engineer in charge. |
| 5 | Supplying all labour with T&P for filling foundation and plinth with sand including watering, ramming etc comolete including cost , conveyance , royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete (measurement will be taken on finished & complete section only) as per the direction of the Engineer in charge. |
| 6 | Cement concrete with (1:3:6) in foundation and floors using 40 mm ( 1 ½ ‘’) size black hard crusher broken granite stone metal of approved quality from approved quarry including lower laying concrete watering and curing etc complete to required level laid in layers not exceeding 150 mm ( 6’’) thick including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 7 | RCC (1:1.5:3) M20 grade in RCC column base and column unto plinth having a minimum compressive strength 20N/mm2 ( in work test of 200 Kg per CM2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S.516 ) using 12 mm to 20 mm size hard black crusher broken granite stone chips ( 20 mm size not to exceed 25% ) including hoisting, lowering, laying compacting concrete by using concrete mixer vibrators and similar equipments and tools and plants with watering and curing for 28 days including centering, shuttering and finishing the exposed surfaces smooth providing grooves or beads where necessary including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects but excluding the cost of M.S. rods or tor steel and binding wires and labour charges for cutting, bending, binding and tying the grills etc complete as per the direction of the Engineer - in – charge. |
| 8 | RCC (1:1.5:3) M20 grade in column having a minimum compressive strength 20 N/mm2 ( in work test of 200 Kg per CM2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S.516 ) using 12 mm to 20 mm size hard black crusher broken granite stone chips ( 20 mm size not to exceed 25% ) including hoisting, lowering, laying compacting concrete by using concrete mixer vibrators and similar equipments and tools and plants with watering and curing for 28 days including centering, shuttering and finishing the exposed surfaces smooth providing grooves or beads where necessary including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects but excluding the cost of M.S. rods or tor steel and binding wires and labour charges for cutting, bending, binding and tying the grills etc complete as per the direction of the Engineer - in – charge. |
| 9 | Supplying,fitting,fixing of MS rod or tor steel including straightening ,cutting, bending, binding by using binding wire of18-20 gauze , molding, welding, jointing if necessary and placing in position as per drawing & technical specification ( Payment shall be made on weight of M.S. Rod & Tor steel only and no separate payment will be made towards the weight of binding wires) including cost,conveyance, royalties and taxes of all materials and cost, conveyance,taxes of all labour T & P required etc complete as per direction of Engineer in charge. |
| 10 | First class brick masonry in cement mortar ( 1:6 ) in SS using fly ash bricks of size (25 X 12 X 8 ) cm with dimensional tolerance (+or-) 8% and crushing strength not less than 75Kg/cm2 after immersing the bricks for six hours in water before use, including splays cutting,circular molding& corbeling,chamfering & similar such type of works,watering and curing etc complete including cost, conveyance, royalties and taxes of all materials & cost, conveyance, taxes of all labour with T&P required for the work etc. complete in all respect as per the direction of Engineer-in-charge.(WITHOUT BRICK FOR REUSE) |
| 11 | First class brick masonry in cement mortar ( 1:6 ) in SS using fly ash bricks of size (23 X 11 X 8 ) cm with dimensional tolerance (+or-) 8% and crushing strength not less than 75Kg/cm2 after immersing the bricks for six hours in water before use, including splays cutting,circular molding& corbeling,chamfering & similar such type of works,watering and curing etc complete including cost, conveyance, royalties and taxes of all materials & cost, conveyance, taxes of all labour with T&P required for the work etc. complete in all respect as per the direction of Engineer-in-charge. |
| 12 | 12 mm thick cement plaster with cement and sand mortar (1:6 ) finished smooth over outside rough surfaces of brick masonry walls etc with watering and curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge. |
| 13 | 16 mm thick cement plaster with cement and sand mortar (1:6 ) finished smooth over inside rough surfaces of brick masonry walls c with watering and curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge. |
| 14 | Priming one coat with af approved quality of primer of Berger make including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge |
| 15 | Painting two coats with weather shield coat on wall surface with a paint of approved shade including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge |
| 16 | Providing,fitting,fixing concertina coil fencing with punched tape concertina coil 600mm dia 10mtr. openable length (total 90mt.),having 50 nos. rounds per 6m. length,upto 3m. height of wall with existing angle iron Y shaped placed 2.4m. or 3.0m. apart and with 9 horizontal R.B.T. reinforced barbed wire,stud tied with GI staples and GI clips to retain horizontal,including necessary bolts or GI barbed wire tied to angle iron,all complete as per the EIC,with reinforced barbed tape(RBT)/spring core(2.5mm thick)wire of high tensile strength of 165kg/sqmm with tape(0.52 mm thick)and weight 43.478 gm/mtr.(cost of MS angle,CC blocks shall be paid separately.)Providing,fitting,fixing concertina coil fencing with punched tape concertina coil 600mm dia 10mtr. openable length (total 90mt.),having 50 nos. rounds per 6m. length,upto 3m. height of wall with existing angle iron Y shaped placed 2.4m. or 3.0m. apart and with 9 horizontal R.B.T. reinforced barbed wire,stud tied with GI staples and GI clips to retain horizontal,including necessary bolts or GI barbed wire tied to angle iron,all complete as per the EIC,with reinforced barbed tape(RBT)/spring core(2.5mm thick)wire of high tensile strength of 165kg/sqmm with tape(0.52 mm thick)and weight 43.478 gm/mtr.(cost of MS angle,CC blocks shall be paid separately.)Providing,fitting,fixing concertina coil fencing with punched tape concertina coil 600mm dia 10mtr. openable length (total 90mt.),having 50 nos. rounds per 6m. length,upto 3m. height of wall with existing angle iron Y shaped placed 2.4m. or 3.0m. apart and with 9 horizontal R.B.T. reinforced barbed wire,stud tied with GI staples and GI clips to retain horizontal,including necessary bolts or GI barbed wire tied to angle iron,all complete as per the EIC,with reinforced barbed tape(RBT)/spring core(2.5mm thick)wire of high tensile strength of 165kg/sqmm with tape(0.52 mm thick)and weight 43.478 gm/mtr.(cost of MS angle,CC blocks shall be paid separately.) |
| 17 | Suppying fitting fixing ofU- shape angle(50x50x6) including cost of material including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge |
| 18 | Painting two coats with synthetic enamel paints to doors and windows with a paint of approved shade including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge |
| 19 | Supplying all labour with T&P for filling foundation and plinth with excavated material including watering, ramming etc comolete including cost , conveyance , royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete (measurement will be taken on finished & complete section only) as per the direction of the Engineer in charge. |
| 20 | Supplying all labour and T&P for removal and disposal of debris , surplus earth and other excavated materials etc by mechanical means upto a distance of 5km with collecting and stacking up same head load with 50mtr including loading and unloading for truck transportation cost including cost, conveyance and taxes of all materials and cost, conveyance and taxes of all labour and T&P required for the work etc complete as per the direction of the EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 25, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender