Tender For Special Repair To electrical installation Replacement Of Secureity Light And Garden Light In The C Us Of Collectoriate Building At Chaibasa.
Tender Value
43.32 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
5 days left
EMD
88000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Singhbum → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To electrical installation Replacement Of Secureity Light And Garden Light In The C Us Of Collectoriate Building At Chaibasa.
BOQ
| Sl. No. | Item Description |
| 1 | Part-\\"A\\"-Annual Repair to E.i in the Campus of Coillectoriate Buidling at Chaibasa. |
| 2 | Wiring for light point/exhaust fan/call bell/point with 1.5 sq mmFR PVC insulated copper conductor single core cable in surfacu/recessed PVC conduit, with modular switch, modular plate suitable G.I/PVC box etc as reqd. |
| 3 | Group C |
| 4 | Wiring for circuit/submain wiring along with earth wire wiyh the following size PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as reqd. |
| 5 | (a) 2x2.5 sq mm+1x2.5sq mm earth wire |
| 6 | S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230V 50Hz, single phase supply etc. complete as required. |
| 7 | a) 20/22W LED Tube lgiht |
| 8 | 48 \\" Ceiling fan rewinding with ball bearing |
| 9 | S.I.T.C of floowing rating reccess/surface mounted LED round/square shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 or IEC:62722 with all neccssary accessories as required |
| 10 | a) 18/20 watt LED Round Down light |
| 11 | b) 2'x2' LED panel lgiht |
| 12 | c) 9 W COB based round LED light with Multiple bem angles (36 Degree) |
| 13 | Replacement & Installation, testing and commissionign of following sizes ceiling fan 3 Blades with 1.5 sq mm FR PVC insuatled, copper wire sutiable for 230v, 50Hz single phase supply etc complete as reqd. |
| 14 | 16\\" (400 mm) wall mounted fan |
| 15 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 16 | a) 8 Way Double door |
| 17 | b) 2 way Single door |
| 18 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, “B” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required. |
| 19 | a) 6/32 Amps single Pole, \\"B\\" series |
| 20 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 21 | a) 40 Amps |
| 22 | b) 63 Amps |
| 23 | Providing and fixing following DP/TP&N sheet metal switch disconnector fuse unit in the existing metal board with rewireable type fuses, including drilling holes in metal board . making connections. etc. as required. |
| 24 | a) 32 Amp DP Main switch |
| 25 | b) 63 Amnps DP Main switch |
| 26 | Part-\\"B\\"- Replacement of Security light, Roof light & Garden light in the campus of Collectoriate Building at Chaibasa. |
| 27 | S/L L.T of XLPE insualted PVC sheathed (Heavy duty) Armoured electric cable with aluminium conductor for working votlage upto and including 1100 votls conforms to IS:1554, Part-1) Make- Havells/ Polycab/ Finolex/ or eqwui) etc as reqd. |
| 28 | a) 2 core 6 sq mm (for garden light + flood light) |
| 29 | b) 2 core 10 sq mm (for existing security lgiht) |
| 30 | Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not exceeding 35 sq mm directr in ground including excavation, and refilling the trench etc as rquired, but excluding sand cushioning and protective covering. |
| 31 | S/F sutiable sizes water proof sintex make distribution junction box with 1 nos MCB well mouned on pole above 2.5 feet from ground level all complete with nut-bolt etc as reqd. |
| 32 | S.I.T.C of floowing rating LED Flood lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS: 10322 part-5/section-5 and shall be complete with all neccssary accessories as required |
| 33 | a) 240 watt LED flood lgiht |
| 34 | b) 50 watt LED Flood lgiht |
| 35 | S.I.T.C of floowing rating LED Street lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS: 10322 part-5/section-3 and shall be complete with all neccssary accessories as required |
| 36 | a) 90/100W LED Street lgiht |
| 37 | S/F 40 mm dia med class G.I pipe for laying of cable inn road crossing |
| 38 | Wiring for circuit/ submain wiring along with earh wire with the following sizes of FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit as required |
| 39 | a) 3x1.5 sq mm (for existing security light) |
| 40 | Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required. |
| 41 | Supply and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including solding etc. as required. |
| 42 | S.I.T.C of following rating LED Post top lamp made in die cast aluminium housing with decorative clear/opal serylic diffuser on existing pipe including connection with 1.5sq.mm. copper conductor etc all complete as required. |
| 43 | a) 40/45W LED Post top lamp clear |
| 44 | S.I.T.C of following rating approved make LED Bollard fitting with cylindrical shape of height 600 to 850mm power input-8/9watt with die cast aluminium housing opel with PC diffuser, IP:65/54 protection, conferming to IS:10322 part 5 etc all complete as required. (excluding plinth charge) |
| 45 | Making PCC (1:2:4) foundation plinth size of 1'x1'x1.5' (0.30 mtr x 0.30 mtr x 0.45 mtr) pathway light/ Garden lgiht etc as reqd. |
| 46 | Dismentaling charge + 1% |
| 47 | Substract Scrap (-) 2% |
| 48 | GST @ 18% |
| 49 | Labour cess @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender