Tender For Providing Cupboard For Room Nos. 1, 7, 8 And 10 In The Guest House Building & Reconstruction Of Collapsed Compound Wall On The Western Side Of Sanathana Boys Hostel & Providing And Fixing Wire Mesh On Windows Of Civil Workshop At Soe C Us
Tender Value
3.61 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
15 days left
EMD
9100
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Cupboard For Room Nos. 1, 7, 8 And 10 In The Guest House Building & Reconstruction Of Collapsed Compound Wall On The Western Side Of Sanathana Boys Hostel & Providing And Fixing Wire Mesh On Windows Of Civil Workshop At Soe C Us For Preventing Entry Of Reptiles At Cusat Thrikkakara C Us
BOQ
| Sl. No. | Item Description |
| 1 | Appendix. 1- UEU/Misc(103)/24-25 - Providing cupboard for room 1,7,8and 10 in Guest house building at CUSAT Thrikkakara campus |
| 2 | Providing and fixing ferro cement slab for cupboard/shelf including cost of all material and labour (including fixing the same to the existing wall after making grooves) etc complete as per the direction of Engineer In Charge |
| 3 | Engaging Mancoolie |
| 4 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 5 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 6 | Providing and fixing ACP, 4mm thick with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge |
| 7 | Supply of cupboard hinges (SS) -premium quality as per the direction of Engineer- in Charge |
| 8 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm |
| 9 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 125 mm |
| 10 | Providing and fixing cupboard lock of approved quality with necessary screws etc. complete. |
| 11 | Providing and fixing powder coated telescopic drawer channels 500 mm long with necessary screws etc. complete as per directions of Engineer -in-charge. |
| 12 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 13 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 14 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats |
| 15 | Appendix.2 - Misc(52) - Reconstruction of collapsed compound wall on the western side of Sanathana boys hostel. |
| 16 | Engaging Mancoolie |
| 17 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 18 | Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etccomplete |
| 19 | 12 mm cement plaster of mix: 1:4 (1 cement : 4 fine sand) |
| 20 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) |
| 21 | Appendix. 3- UEU/5360/25-26- Providing and fixing wire mesh on windows of Civil Workshop at SOE Campus for preventing entry of reptiles. |
| 22 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointedmechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 23 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 24 | Providing & fixing fly proof wire gauze to windows including the nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender