Tender For For Required Places Construction Of Brick Work,Plastering,Coloring,Water Proofing,Coping,Dismantaling, P.O.P, Rain Water Harvesting For Bhusawal Municipal Council
Tender Value
50 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
19 days left
EMD
50000
Bank guarantee accepted
Document Fee
4500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalgaon → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for For Required Places Construction Of Brick Work,Plastering,Coloring,Water Proofing,Coping,Dismantaling, P.O.P, Rain Water Harvesting For Bhusawal Municipal Council
BOQ
| Sl. No. | Item Description |
| 1 | Item No.01 : - Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc. complete.DSR Page No./ Item No.46.09 |
| 2 | Item No. 02 :- Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete.DSR Page No./ Item No.46.19 |
| 3 | Item No. 03 :- Conveying materials obtained from road cutting inluding all lifts,laying in layers of 20cm.to30cm.breaking clods,dressing to the required lines,curves,grades and section,watering and compacting to not less than 97% of standard proctor density for a lead of 300m. to 500m. inclusive, from the site of excavation to the site of deposition as directed. SSR2020-23 Page No./Item no 2.26 |
| 4 | Item No. 04 :- Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum rtype mixer with SCADA with natural sand) DSR Page No./ Item No. 11.04 |
| 5 | Item No.05 :- Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. CompleteDSR Page No./ Item No.27.13 |
| 6 | Item No. 06 :- Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mmDSR Page No./ Item No.39.56 |
| 7 | Item No. 7Providing and fixing solid core flush door shutter in single leaf 32 mmthick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.DSR Page No./ Item No.39.09 |
| 8 | Item No. 8 Providing and fixing in position TMT FE500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjag, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. a) For TMT Fe 415 steel bars ( If Mild Steel/HYSD steel is to be used prior permission from S.E. should be taken )DSR Page No./ Item No.26.33 |
| 9 | Item No. 9Providing sand faced plaster extemally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.DSR Page No./ Item No.32.11 |
| 10 | Item No. 10Providing intemal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.DSR Page No] Item No.32.04Spec No. : Bd. L.2 Page No.368 |
| 11 | Item No. 11Providing and laying ceramic tiles of RAKI Kajaria/ Nitco/ Asian or equivalent make having size 30 cm x 30 cm confirming l.S.15622/2006 (group D IIA) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.DSR Page No] Item No.33.24 |
| 12 | item No. 12Providing and laying ceramic tiles of RAK/Kajaria / Nitco /Asian or equivalent make having size 30 cm. x 30 cm. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colourDSR Page No./ Item No.33.25 |
| 13 | Item No. 13Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.DSR Page No./ Item No.35.13 |
| 14 | Item No. 14 :- Providing & applying washable oilbound distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.DSR Page No./ Item No.36.11 |
| 15 | Item No. 15providing and fixing 100 mm dia stabiliser pipe/ P.V.C, soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, junctions,signal, slotted vent, clamps etc. complete.DSR Page No./ Item No.42.52 |
| 16 | Item No. 16Providing and casting in situ cement concrete in M20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks compacting i curing finishing & roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).. With natural sand.DSR Page No./ Item No.26.23 |
| 17 | Item No. 17Providing and fixing false ceiling of 10 to 12 mm thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, comices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards etc. complete. (excluding frame work, runners and mild steel suspenders).DSR Page No] Item No.38.17 |
| 18 | Item No. 18Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surfacesmooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 yearsGuarantee aDSR Page No] Item No.31.04 |
| 19 | Item No. 19Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm [kg with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.DSR Page No./ Item No.31.09 |
| 20 | Item No. 20Providing and fixing in position (as per 1868 / 1982)Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing DSR Page No./ Item No.39.42 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender