Tender For Repair / Replacement Of Water Supply Pipe Line, Pump And Other Connected Work At Sector A & B(Harni Area) Under Ge (Army) Baroda.
Tender Value
35 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
7 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vadodara → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement Of Water Supply Pipe Line, Pump And Other Connected Work At Sector A & B(Harni Area) Under Ge (Army) Baroda.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exc 1.5m wide & not exc 1.5m in depth for foundation for laying of CI /GI pipe line in trenches not exc 10sqm on plan & not exc 1.5m in depth & getting out in any type of soil. |
| 2 | Returning, filling in trenches including spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil. |
| 3 | Removing excavated material to a distance not exc 50mtr and depositing where directed at level n exc1.5 mtr above the starting point |
| 4 | Taking up or down old unserviceable DI/GI/CI tubing connection including disconnection of fittings from tubing where required and cleaning for refixing or removal from site complete as directed by Engr-in-Charge of following sizes :- |
| 5 | Old GI 20 mm bore |
| 6 | Old GI 25 mm bore |
| 7 | Old GI 40 mm bore |
| 8 | Old GI 50 mm bore |
| 9 | Old GI/CI 80 mm dia |
| 10 | Old DI/GI/CI 100 mm dia |
| 11 | Old DI/200 mm dia |
| 12 | Old DI 150 mm dia |
| 13 | Refixing/Relaying of old DI/GI/CI tubing and connections in new or old position including new tightening rubber complete all as directed by Engr-in-Charge. |
| 14 | GI/PPR pipe 20 mm dia |
| 15 | GI/PPR pipe 25 mm dia |
| 16 | GI pipe 40 mm dia |
| 17 | GI pipe 50 mm dia |
| 18 | GI/CI pipe of 80 mm bore |
| 19 | DI/GI/CI pipe of 100 mm bore |
| 20 | DI pipe of 150 mm bore |
| 21 | Supply & laying of water pipe lines of the following sizes and Med grade complete with fittings (such as bends, elbows, tees, short pieces, connectors, caps, plugs, unions and screwed socket joints etc) laid in trenches complete as directed by Engr-in-Charge, of following sizes (Note when pipe laid in straight line then the 3rd length is required to be connected by union. :- Note: After laying u/m pipe line the contractor should proper water supply through the Pipe line. |
| 22 | GI pipe, 20 mm dia |
| 23 | GI pipe, 25 mm dia |
| 24 | GI pipe, 40 mm dia |
| 25 | GI pipe, 50 mm dia |
| 26 | GI pipe, 80 mm dia |
| 27 | GI pipe, 100 mm dia |
| 28 | Supply and fix in repalcement of Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors, borewell etc., any type of pipe of size 50 mm and make compatable connection with existing. |
| 29 | Supplying, laying, jointing & testing Ductile iron Pipes ,special class – K 7 ISI marked (IS-8329-2000 Reaffirmed -2005 Eddition 4.1) suitable for push on joints supplied with rubber gaskets , with sockets and cement mortar lining and metallic zinc coating inside and with finishing layer of bitumenous paint outside , without polyethelene sleeves but including Push on joint supplied with EDPM rubber gasket conforming to IS 5382-1985(reaffirmed-2003) with dual hardness of type 2 (bulb) and type-5 (Heel) quality , laid in trenches all as specified and as directed complete of following size:Note: After laying u/m pipe line the contractor should proper water supply through the Pipe line. |
| 30 | 200 mm bore |
| 31 | 150 mm bore |
| 32 | 100 mm bore |
| 33 | 80 mm bore |
| 34 | S&F in replacement of old damaged / unserviceable gate valve non rising spindle heavy duty with iron wheel head, screwed both end for connection GI pipes complete all as specified for the following sizes of pipe (ISI marked). |
| 35 | GI tubing 50mm dia bore |
| 36 | GI tubing 40mm dia bore |
| 37 | GI tubing 25mm dia bore |
| 38 | GI tubing 20mm dia bore |
| 39 | GI tubing 15mm dia bore |
| 40 | Supply and fixing in repair of Gi union |
| 41 | 15 mm dia |
| 42 | 20mm dia |
| 43 | 25 mm dia |
| 44 | 40mm dia |
| 45 | 50 mm dia |
| 46 | Supply and fixing in repair of GI elbow |
| 47 | 15 mm dia |
| 48 | 20mm dia |
| 49 | 25 mm dia |
| 50 | 40mm dia |
| 51 | 50 mm dia |
| 52 | Supply and fixing in repair of GI Tee |
| 53 | 20mm dia |
| 54 | 25 mm dia |
| 55 | 40mm dia |
| 56 | 50 mm dia |
| 57 | Supply and fixing in repair of GI Socket |
| 58 | 15 mm dia |
| 59 | 20mm dia |
| 60 | 25 mm dia |
| 61 | 40mm dia |
| 62 | 50 mm dia |
| 63 | Supply and fixing in repair of GI Nipple |
| 64 | 15 mm dia |
| 65 | 20mm dia |
| 66 | 25 mm dia |
| 67 | Supply and fixing, ISI Marked, of approved quality, cast iron non return valve 100 mm bore , PN 1.6, both ends flanged jointed and tested including taking down of old one and arrangement of flanged on existing Pipe complete all as specified and directed by Engr-in-charge. |
| 68 | Supply and fixing, ISI Marked, of approved quality, cast iron non return valve 80 mm bore , PN 1.6, both ends flanged jointed and tested including taking down of old one and arrangement of flanged on existing Pipe complete all as specified and directed by Engr-in-charge. |
| 69 | M & L for caulking of lead joint of spigot and socket cast iron pipe incl providing lead wool and making joint leak proof including necessay earth work/excavation and making good disturbed site, T & P and draining out water etc of following as directed. |
| 70 | 150 mm bore |
| 71 | 100 mm bore |
| 72 | 80 mm bore |
| 73 | S&F, for CI/DI special bends (any type radius & angle), tappers any type (straight bend increasing or decreasing or double socket etc) tee pieces single branch ‘Y’ junction double branch cross (all sockets or socket & spigot) collars caps plug etc up to 150 mm bore for spigot & socket and socket pipes. |
| 74 | Material and labour for cutting, drilling and tapping in cast iron/GI/DI water mains (in postion) in size for branch connection including excavtion earth work re-filling, leakge visiable check & fixing assceesory etc all as specified and directed. |
| 75 | 150 mm bore |
| 76 | 100 mm bore |
| 77 | S&F in repair sluice valve cast iron both ends flanged class PN-1.0 conforming to IS-14846 with stainless steel spindle including joints & jointing materials (Rubber gasket, nut, bolts,washers etc) complete of following sizes. |
| 78 | 150 mm bore |
| 79 | 100 mm bore |
| 80 | 80 mm bore Please Enable Macros to View BoQ information |
| 81 | 80 mm bore Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender