Short dated tender - Tender For Provision Of Sprinkler System At Various C&D Waste Site At U Turn Nh709b Near Nehru Enclave In Railway Land In Ward No 202 Shakarpur And Pwd Road Near Fcts Patparganj Road In Ward No 203 Laxmi Nagar Under Shahdara South Zone
Tender Value
8.16 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
2 days left
EMD
17200
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Short dated tender - Tender for Provision Of Sprinkler System At Various C&D Waste Site At U Turn Nh709b Near Nehru Enclave In Railway Land In Ward No 202 Shakarpur And Pwd Road Near Fcts Patparganj Road In Ward No 203 Laxmi Nagar Under Shahdara South Zone
BOQ
| Sl. No. | Item Description |
| 1 | PART A: Supply, Installation, Testing and Commissioning (SITC) of High Pressure Misting triplex plunger Pump Unit coupled with 3 HP, 230 V, 50 Hz, single Phase, TEFC squirrel cage induction motor having a min. discharge capacity of 7 LPM at 70 Bar working pressure and 100 Bar maximum operating pressure, complete with forged brass manifold, ceramic coated plungers, anodized aluminium crankcase, U-type duplex plunger seals, built-in pressure regulating/unloader valve, glycerine-filled pressure gauge (0–100 Bar), flexible coupling with coupling guard, suction strainer, pressure relief valve, complete with all accessories, interconnecting fittings, foundation bolts, electrical connections, testing and commissioning, suitable for continuous-duty industrial dust suppression applications, complete as required. |
| 2 | Supply, Installation, Testing and Commissioning of singe Stage Water Filtration Unit comprising 20 Micron Cartridge Filter, complete with heavy-duty filter housings, replaceable filter cartridges, isolation valves, pressure gauge, drain arrangement, inlet/outlet connections, mounting brackets, SS304 connectors, and all necessary accessories. The filtration unit shall be suitable for removing suspended particles and impurities to protect the high-pressure pump and atomizing mist nozzles from clogging, ensuring reliable operation of the industrial misting system. The assembly shall be corrosion-resistant, suitable for continuous industrial duty, and compatible with the required system flow rate and operating pressure. The item shall include complete as required. |
| 3 | SITC of 1/2 in High Pressure Heavy Duty Nylon Pipe rated for minimum 100 Bar working pressure, UV resistant, flexible, suitable for industrial misting systems, complete as required. |
| 4 | Supply, Installation, Testing and Commissioning of 3/8 in High Pressure Heavy Duty Nylon Pipe rated for minimum 100 Bar working pressure, UV resistant, flexible, suitable for industrial misting systems, complete as required. |
| 5 | Supply, Installation, Testing and Commissioning of Compression Type Brass End Fittings, Male Thread Adaptor (MTA), End Plug and associated compression connectors suitable for 100 Bar high-pressure nylon tubing, complete as required. |
| 6 | Supply, Installation, Testing & Commissioning (SITC) of Forged Brass Compression Tee, suitable for 1/2\\" high-pressure nylon header pipe × 3/8\\" branch connection, minimum 100 Bar working pressure, complete with compression nuts, ferrules, sealing components and all accessories required for a leak-proof high-pressure misting system. |
| 7 | Supply, Installation, Testing & Commissioning (SITC) of Forged Brass Compression Elbow (90°), suitable for 1/2\\" high-pressure nylon piping, minimum 100 Bar working pressure, complete with compression nuts, ferrules, sealing components and all accessories required for complete installation |
| 8 | Supply, Installation, Testing & Commissioning (SITC) of Forged Brass Straight Compression Union, suitable for 1/2\\" high-pressure nylon piping, minimum 100 Bar working pressure, complete with compression nuts, ferrules, sealing components and all accessories required for complete installation |
| 9 | Supply, Installation, Testing & Commissioning (SITC) of Brass Compression Nut & Ferrule Set, suitable for 1/2\\" and 3/8\\" high-pressure nylon tubing, minimum 100 Bar working pressure, complete with all accessories required for leak-proof high-pressure pipe connections. |
| 10 | Supply, Installation, Testing & Commissioning (SITC) of High Pressure Brass Compression Type Nozzle Adapter, suitable for 3/8\\" high-pressure nylon tubing with 10/24\\" threaded outlet, minimum 100 Bar working pressure, complete with compression nut, ferrule, sealing components and all accessories required for mounting high-pressure misting nozzles. |
| 11 | Supply, Installation, Testing and Commissioning of High Pressure Anti-Drip Misting Nozzle with Brass nickel-plated body, ceramic orifice of 0.30 mm, integrated stainless steel micro filter, anti-drip check valve, suitable for operation up to 100 Bar pressure. The nozzle shall produce ultra-fine mist for industrial cooling and dust suppression applications, complete with all accessories. |
| 12 | Supply, Installation, Testing & Commissioning (SITC) of SS304 Nozzle Extension, suitable for mounting high-pressure misting nozzles, complete with threaded connections, mounting hardware and all accessories, designed for continuous outdoor operation in high-pressure dust suppression systems. |
| 13 | Supply, Installation, Testing & Commissioning (SITC) of High Pressure Spray Gun, brass body with adjustable spray pattern, suitable for operation up to 100 Bar working pressure, complete with trigger mechanism, swivel inlet connection and all accessories required for manual dust suppression applications. |
| 14 | Supply, Installation, Testing & Commissioning (SITC) of 1/2\\" High Pressure Flexible Hose, 9 metres long, minimum 100 Bar working pressure, reinforced thermoplastic construction with crimped end fittings, suitable for high-pressure spray gun connection, complete with all accessories and fittings. |
| 15 | Supply, Installation, Testing & Commissioning (SITC) of Forged Brass High Pressure Ball Valve, full bore design, suitable for high-pressure misting applications, minimum 100 Bar working pressure, complete with lever handle, threaded connections and all accessories required for isolation of manual spray line. |
| 16 | Supply, Installation, Testing & Commissioning (SITC) of Outdoor Floor Mounted IP65 Electrical Control Panel, fabricated from 2.0 mm thick CRCA sheet steel with seven-tank pre-treatment and outdoor polyester powder-coated finish, suitable for automatic and manual operation of a 3 HP, 230 V, Single Phase High Pressure Pump, complete with incoming MCCB, outgoing MCB, AC-3 duty power contactor, thermal overload relay, digital cyclic timer relay, Manual/OFF/Auto selector switch, Start/Stop push buttons, Emergency Stop push button, LED indication lamps (Power ON, Pump Running, Auto Mode and Fault), float switch interlock, copper busbar, terminal blocks, internal FRLS copper wiring, cable glands, gland plate, earthing terminal, neutral link, ventilation arrangement, lockable enclosure, engraved labels, danger plate, complete with all accessories, testing, commissioning and handing over in satisfactory working condition. |
| 17 | Supply, Installation, Testing & Commissioning (SITC) of Heavy Duty Float Switch, suitable for automatic low water level protection of pump, complete with cable, mounting accessories and electrical connections. |
| 18 | Supply, Installation, Testing & Commissioning (SITC) of High Pressure Solenoid Valve, suitable for 70 Bar working pressure, brass/stainless steel construction, complete with coil, mounting accessories and electrical connections. |
| 19 | Supply, Installation, Testing & Commissioning (SITC) of Adjustable Pressure Relief Valve, suitable for 70 Bar working pressure and 100 Bar maximum pressure, complete with fittings and accessories. |
| 20 | Supply, Installation, Testing & Commissioning (SITC) of Glycerine Filled Pressure Gauge, 100 mm dial, measuring range 0–100 Bar, complete with isolation valve, mounting accessories and fittings. |
| 21 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required. |
| 22 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 23 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 24 | Supply, Installation, Testing & Commissioning (SITC) of Heavy Duty Brass Cable Glands, Copper Cable Lugs, Ferrules, Identification Sleeves and Associated Wiring Accessories, complete for termination of power and control cables. |
| 25 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amp |
| 26 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 27 | S.I.T.C of Hot Press moulded SMC panel/Canopy Box of size(OD) 920 mm x 460 mm x 260 mm & (ID) 900 mm x 450 mm x250 mm , anti – corrosive, dust proof, rust proof, shock proof , Self-extinguishing property , resistant to heat , Vermin proof, Ultra Violet stabilized, Pilfer resistant, Suitable for mounting 1 no. 3 phase Starter, 1 no. 63 Amp 4 pole isolator and 1 no. 3 phase Energy meter, Socket for outgoing connection with pilferage proof SMC door duly welded with S/S handle having danger logo on its outer surface and with 1 no Hot Dip galvanized iron stand for a base of size 40 mm x 40 mm x 5 mm and height of the stand is 600 mm including 300 mm height below the ground with side strip of size 25 x 5 mm. |
| 28 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amp |
| 29 | Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-2C*6 sqmm |
| 30 | PART B: AMC for 2nd year @ 3% of Part A |
| 31 | AMC for 3nd year @ 4% of Part A Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender