Tender For Provn Of Two Sets Of Community Toilets (Each Consisting 10X Urinal Points, 05X Washbasin And 20X Toilet Seats) And Water Connection With 50 Users Septic Tank And Soakage Well At 256 Transit C In Old Air Field, Srinagar Under Ge 970 Ews
Tender Value
43.45 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
16 days left
EMD
87000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Two Sets Of Community Toilets (Each Consisting 10X Urinal Points, 05X Washbasin And 20X Toilet Seats) And Water Connection With 50 Users Septic Tank And Soakage Well At 256 Transit C In Old Air Field, Srinagar Under Ge 970 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n.exc 1.50m wide and n exc 1.5m depth for foundation etc or for shafts, wells, etc and getting out in hard/ dense soil complete all as specified and directed. |
| 2 | Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil complete all as specified and directed |
| 3 | Excavating over areas, exc 1.5m deep but n exc 3.0 m and getting out in hard/dense soil complete all as specified and directed |
| 4 | Returning filling incl spreading leveling watering and well rammings in layers n exc 25cm complete all as specified and directed. |
| 5 | Removal of surplus soil n exc 50m and depositing where dirtected at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 6 | M&L for cement concrete 1:4:8 type D-2 (40mm graded aggregate) in foundation, filling and mass concrete complete all as specified and directed. |
| 7 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished complete all as specified and directed by Engr-in-charge. |
| 8 | Use & waste formwork for sides of concrete foundations, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 9 | Use & waste formwork for sides of columns etc and similar work; vertical or to batter complete all as specified and directed. |
| 10 | Use & waste for formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc complete all as specified and directed. |
| 11 | M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 12 | All as per Ser item No 11.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders complete all as specified and directed. |
| 13 | M&L for RCC (design mix) M-30 in foundation, including rafts, footing, foundation beams, plinth beams; bases for columns, etc.; basement slabs, underreamed piles and mass concrete complete all as specified and directed. |
| 14 | M&L for RCC (design mix) M-30 in Columns complete all as specified and directed. |
| 15 | M&L for RCC (design mix) M-30 in beams, cantilevers, bressummers, linlets over 1.5m span complete all as specified and directed. |
| 16 | M&L for RCC (design mix) M-30 in suspended slab such as roof slabs, floor slabs, landings and similar works complete all as specified and directed. |
| 17 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed. |
| 18 | M&L brick work with sub class \\"B\\" brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 19 | M&L for structural steel work for roof truss, purlins, crane, gantries, rails incl distance pieces, cleats etc complete all as specified and directed. |
| 20 | M&L for mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm long complete all as specified and directed. |
| 21 | S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 22 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 23 | S&F for hand rail straight portion, flat iron fillets incl all necessary drilling, bolting or riveting etc and similar work complete all as specified and directed. |
| 24 | S&F for plain black MS sheet 1.40mm thick as in eaves boards complete all as specified and directed. |
| 25 | S&F 12mm thick Gypsum board fixed in anodised aluminium snap grid 605 X 605mm frame work as in false ceiling including hangers 6mm dia GI (up to 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40X3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long fixed (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover filletscomplete all as specified and as directed. |
| 26 | M&L for glazed ceramic coloured tile for vertical surfaces of size 450x350x7mm thick , set and jointed in neat cement slurry and pointed in white or colour cement to matched including 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 27 | M&L for 75mm thick PCC 1:4:8 type D2 (40mm graded aggregate) as in sub base complete all as specified and directed. |
| 28 | M&L for 25mm PCC 1:2:4 type B0 (12.5mm graded aggregate) as in floor complete all as specified and directed. |
| 29 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 30 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfacec in CM 1:6, finish even and smooth without using extra cement complete all as specified and directed. |
| 31 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surfacec in CM 1:4, finish even and smooth without using extra cement complete all as specified and directed. |
| 32 | M&L Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 33 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 34 | S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 35 | S&F for solid PVC solid door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, in opening as per specification & drawing complete all as specified and directed. |
| 36 | S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom raols. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail: panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed. |
| 37 | S&F for 100mm size butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed. |
| 38 | S&F for Aluminium anodised cast type handles size 100mm complete all as specified and directed. |
| 39 | S&F for Aluminium anodised barrel tower bolts of extruded section and fixed 150mm length complete all as specified and directed. |
| 40 | S&F Vitreous china wash basin with pedestal, white, flat back, size 550x400mm including waste coupling of PTMT (half or full threaded) 32 mm bore (Minimum weight 45 gms) and waste pipe complete all as specified and directed. |
| 41 | S&F Pillar taps long body, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered with long screwed shanks and fly-nuts, screwed for any pipe and fixed complete all as specified and directed. |
| 42 | S&F 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 43 | M&F for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'p' or 's' traps (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 44 | Supply and fix vitreous china wash down water closet pan (padestal pattern) white incl 'P' or 'S' 100 mm trap and making good the disturbed surface to match with the existing complete all as specified and all as directed. |
| 45 | S&F plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated hanging device Make-Cera/Hindware complete all as specified |
| 46 | S&F CP jet spray for EWC with flexible pipe and angle cock/stop cock complete all as specified. |
| 47 | S&F low level PVC valveless, syphonic action type flushing cistern of capacity 10 ltr low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed |
| 48 | S&F for flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level flushing cistern complete all as specified and directed. |
| 49 | S&F vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, including urinal spreader and waste pipe complete all as specified and directed. |
| 50 | S&F 15mm bore bib taps, chromium plated, cast copper alloy with crutch or butterfly handle screwed down, screwed for pipe or for brass female and fixed complete all as specified and directed. |
| 51 | S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 52 | S&F soap dish, vitreous china white complete all as specified and directed. |
| 53 | S&F stop valves/angle valves fancy type, chromium plated with long shank and cup screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed bore dia of pipe 15mm complete all as specified and directed. |
| 54 | S&F PVC (SWR) junction single, (Single T) 75 mm equal or unequal complete all as specified and directed. |
| 55 | S&F PVC (SWR) junction single, (Single T) 110 mm equal or unequal complete all as specified and directed. |
| 56 | S&F 75mm PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 57 | S&F 110mm PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 58 | S&F PVC (SWR) bend any radius 75mm complete all as specified and directed. |
| 59 | S&F PVC (SWR) bend any radius 110mm complete all as specified and directed. |
| 60 | S&F 75mm PVC (SWR) vent cowl fixed to pipes complete all as specified and directed. |
| 61 | S&F grating doom 100mm dia of PTMT. (Min weight 25 gms) complete all as specified and directed. |
| 62 | S&F 16mm outer dia 3-layer PP-R polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 63 | M&L 20mm outer dia for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as pecified and directed. |
| 64 | S&F 1000 litre capacity, double layered rotational moulded polythylene water storage tanks ISI marked (cylindrical vertical with closed top) hoisted and fixed in position including tank nipple and gate valve for each tank complete all as specified and directed |
| 65 | M&L Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe 410 Gde E Aualit A complete all as specified and directed |
| 66 | S&F Ball valve high pressure 20 mm bore of PTMT with epoxy coated aluminium rod high denisty plastic ball screwed for iron pipe and fixed ( minimum weight 120 gm) , complete all as specified and as directed |
| 67 | M&L for preparation of new plastered surfaces of walls and applying two coats of white wash complete all as specified and directed. |
| 68 | M&L for preparation on new plastered surfaces and applying two coat of cement base paint complete all as specified and directed. |
| 69 | M&L for preparation of new steel surfaces on any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 70 | M&L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 71 | M&L for 75mm thick PCC 1:3:6, type C2 (40mm graded aggregate) as in plinth protection complete all as specified and directed. |
| 72 | M&L Granite (of any type) tiles 20mm thick machine cut fixed to walls in any position with L hook and Fasteners to hold as partition with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as apecified and directed by Engr-in-Charge. |
| 73 | M&L for reinforced concrete pipes, class NP2, internal daimeter 150 mm laid in trenches and jointed complete with collars all as specified and directed. |
| 74 | M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in bed to drain pipes of size150mm bore,including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 75 | M&L Loose filling with aggregates of gauge 80 to 150 mm in soakage pits, in soakage wells complete all as specified and directed. |
| 76 | M&L for concealed point wiring with FRLS-H, PVC insulated, unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size (Phase and Neutral) alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated and suitable for modular metal flush box as per site requirement for fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit piping in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface for the following. : (Make :Havells/polycab/finolex/KEI for cable) Note: (a) Rate of modular cover plates are paid seperately in respected items. |
| 77 | S&F in repairs in repairs Ceiling rose surface bakelite 65 x 50 mm, three terminals, 240 volts all as specified. |
| 78 | S&F of tube light fitting 1x 20 watts 4 feet with LED batten with aluminium housing and integrated electronic driver in cluding LED tube light white colour complete including connecting up with twin core twisted flexible copper conductor cable with suitable size all as directed. Make: Havells or equivalent Bajaj/ Crompton |
| 79 | S&F of tube light fitting 1x 10 watts 2 feet with LED batten with aluminium housing and integrated electronic driver in cluding LED tube light white colour complete including connecting up with twin core twisted flexible copper conductor cable with suitable size all as directed. Make: Havells or equivalent Bajaj/ Crompton |
| 80 | S&F modular white cover plate with frame 6 module complete all as specified and directed. Make-Anchor Roma/Crabtee/Schneider. |
| 81 | S&F modular white cover plate with frame 8 module complete all as specified and directed. Make-Anchor Roma/Crabtee/Schneider. |
| 82 | S&F Modular switch 1 Way 6 Amps, 1 module complete all as specified and directed. Make-Anchor Roma/Crabtee/Schneider. |
| 83 | S&F DB with sheet metal enclosure 240 volts, 8 way with 200 Amp rated bus bar single pole & neutral double door type for MCBs including mounting work as required in position complete all as specified and as directed. Make-Havells/ABB/L&T/Schneider. |
| 84 | S&F MCB SPN 40 amps 230 volts C curve, 50 HZ AC 10 KA Make-Havells/ABB/L&T/Schneider. |
| 85 | S&F MCB SP 06 to 32 amps 230 volts C curve, 50 HZ AC 10 KA Make-Havells/ABB/L&T/Schneider. |
| 86 | Supply and fix exhaust fan made of steel body complete AC Single Phase, voltage 230V, 50 Hz, RPM 1320, Copper winding of sweep 300mm including electric connection from ceiling rose to connector with flexible cord twin core twisted copper of size 23/0.0076 complete all as specified and directed by Engr-in-charge. (Make:-Bajal/ Havells/CG) |
| 87 | M&L for Earthing complete with galvanised steel earth plate, electrode, 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised earth lead wire 4.0mm dia by mens of nuts, bolts, & washers of GI as shown in electrical plate No. 3 of SSR Part-I Connected to earthing ten point all as specified and including necessary earth pit PCC 1:3:6 chanber be 50mm thick PCC 1:2:4 chamber cover with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover , watering arrangement shall be made with GI pipe medium grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 15mm dia upto 7.5 from the earth plate electrode & refilling of soil etc including necessary excavation & earth work in any strata and PCC chamber all as specified and directed by Engr-in-Charge including demolish existing earth pit taking out old materials. |
| 88 | Supply and laying of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable 16 Sqmm 2 core with aluminium conductor laid in trenches/pipes, fixed to poles/walls with suitable saddle including complete all as directed. Make: Havells/KEI/Glostar/Polycab |
| 89 | Supply and laying dry river sand laid in trenches as cable cushioning and covering complete all as secified and directed. Note : Punned thickness only measured and paid. |
| 90 | M&L for brick well brunt locally available sub class'B' laid over sand cushioning to cable in trenches keping width of brick parallel to the length of cable complete all as specified and directed. |
| 91 | M&L for Galvanised steel tube, light grade with all fittings for cable protection fixed with poles of 50 mm bore including complete all as specified and directed. |
| 92 | Supply and Laying of PPR pipes 3- layer SDR 7.4 of outer diameter of pipes as following UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply all PPR plain & brass threaded polypropylene random fittings laid in trenches including fittings and testing complete all as specified and directed. Make: SFMC/Supreme/Finolex Size of pipe :- (a) 25 mm dia. |
| 93 | Supply and fixing making connection of PPR distribution branch with PPR main of sizes 16 mm to 50 mm by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed. |
| 94 | Supply and fixing PPR gate valve (brass insert) of size 25 mm dia including connection and testing complete all as directed. Make: SFMC/Supreme/Finolex |
| 95 | S&F GI Flat strip clamps of size 25mm x 3mm duly bended as per the size of GI tubing and site condition,drilled all as directed by Engineer in Charge. |
| 96 | Notes :- Amount of Credit Schedule for Schedule 'A' Part-ll if any shall be deducted from total quoted amount of BOQ to arrive at the contract sum Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender