Tender For Upgradation Of Mali Hut At Rangward Pahalgam Adv. Cost=₹ 11.58 Lacs Amount Without Gst= ₹ 9.81 Lacs Gst Amount= ₹ 1.77 Lacs
Tender Value
11.58 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
2 days left
EMD
23160
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Mali Hut At Rangward Pahalgam Adv. Cost=₹ 11.58 Lacs Amount Without Gst= ₹ 9.81 Lacs Gst Amount= ₹ 1.77 Lacs
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan,including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil : |
| 3 | Providing & Laying of stone soling (dully hand packed)including watering dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 4 | Providing & laying in position cement concrete in Lining walls, any thickness of specified grade excld. The cost of centring and shuttering (1:2:4 coarse sand 20mm nominal size crushed stone agg.) All works upto plinth |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 6 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 16.94.1 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. |
| 7 | Ruled/flush pointing on white sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio 1:1.5:1/2 one lime : 1.5 surkhi ( 50% red and 50% light yellow surkhi): 1/2 marble dust ( the rate is inclusive of all materials and labours involved except scaffolding) |
| 8 | Providing and Fixing of wooden jali (Jaffery/)over the glass panes with putty and glazing in aluminium frames all complete job |
| 9 | Providing and Fixing of float glass panes 3.5 mm thick (Weighing not less than 10kg/Sqm) |
| 10 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/ 10sqm of approved brand and manufacture |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work icluding primer of approved brand |
| 12 | Providing & Fiixing of Sanitry Fittings: of approved brand as per specificiations of EIC ( Jaguar/hindware)Hand Shower |
| 13 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 14 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 15 | CP Connections |
| 16 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 17 | Providing and fixing VIP Double Bed of size 6'-6\\" × 6'-0\\" (1980 × 1830 mm), made of good quality seasoned hardwood/approved engineered wood, including sturdy frame, supports, legs and decorative upholstered headboard, finished with approved quality veneer/laminate/polish as specified. The bed shall be properly fabricated, assembled and fixed complete with all necessary hardware, fittings and accessories, including provision for mattress, complete in all respects as per approved design and instructions of the Engineer-in-Charge. |
| 18 | Providing and fixing VIP Dining Table of approved design and size, made of good quality seasoned hardwood/approved engineered wood, with sturdy frame, legs and top, finished with high-quality approved veneer/laminate/polish. The table shall be properly fabricated and assembled with all necessary hardware, fittings and accessories, including smooth and durable surface finish, complete in all respects as per approved design, specifications and instructions of the Engineer-in-Charge. |
| 19 | Providing and fixing VIP Wooden Chair of approved design and size, made of good quality seasoned hardwood/approved timber, including sturdy frame, legs, backrest and armrests, wherever required. The chair shall be properly jointed, smoothly finished and polished with approved quality wood polish/varnish, with upholstered seat and backrest using good quality foam and fabric/leatherette, including all necessary fittings, hardware and accessories, complete in all respects as per approved design, specifications and instructions of the Engineer-in-Charge. |
| 20 | Providing and fixing decorative Crewel Curtain, 4'-0\\" wide, made of good quality approved fabric with traditional Kashmiri Crewel embroidery work, including lining, suitable pleating, stitching, hooks/rings and all necessary accessories for hanging, complete in all respects as per approved design, colour, pattern and instructions of the Engineer-in-Charge. |
| 21 | Providing and fixing VIP Sofa Set of approved design and size, comprising one 3-seater sofa and two 1-seater chairs, made of good quality seasoned hardwood/approved engineered wood frame, properly jointed and supported, with high-density foam cushioning, upholstered with good quality approved fabric/leatherette, including back and seat cushions, armrests, legs, polished/laminated wooden portions, all necessary hardware and accessories, complete in all respects as per approved design, specifications and instructions of the Engineer-in-Charge. |
| 22 | P/F 50 L hot water Geyser incl all fittings of approved make as direceted by EIC (Venus,Racold or Jaguar) |
| 23 | Supply, Installation, Testing and Commissioning of 200/250mm sweep exhaust fan Shutter type of Havell /Bajaj/ Crompton/ equivalent make as directed by engineer incharge. Air Flow capacity >850cmph, 35-50Watts, Noise level 44db, 1200 rpm,water resistant, including making of space in wall/window as per site requirement and necessary connections. The job includes replacement warranty of fixture if damaged/burn out what so ever reason for a period of two years reckoned from the date of sucessful commissioning / handing over of site to the intending department. (To be got approved before Installation from EIC) |
| 24 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Chaar Gul |
| 25 | Providing and filling of Good Earth incl all carriages and compaction,not excceding 30 cms in depth and compact each layer by power Roller or hand Rammers watering Complete job |
| 26 | Supply, Installation, Testing and Commissioning of 3 star rating 1.5 Ton Inverter type (Hot and Cold) split Air Conditioner suitable for operation on AC supply single phase 50Hz 230V with hermetically sealed inverter compressor with air cooled condenser latest R410A/ R-32 refrigerant fan motor, start and run capacitors, relay and over load protector internal unit with one indoor and one outdoor unit. The indoor unit fitted on wall by employing suitable clamps and the outdoor unit will be placed on angle iron stand fitted with nut/bolts outside the room to avoid noise, including standard length of suitable size copper tubing covered with nitrilic foam, topping up with refrigerant for additional length of piping if required, PVC flexible drain pipe, suitable capacity 3 core sheathed/ PVC insulated copper cable and a battery operated wireless remote unit. The job includes repairs to walls wherever the same are cut and the AMC of AC for a period of one year from date of successful commissioning. (Panasonic/Daikin/Godrej/LG/Lloyd/ Voltas)Sample to be approved before installation including Supply, Installation, Testing and Commissioning of 4KVA automatic relay type Voltage Stabilizer for 1.5 ton AC operating from input voltage 90-260V thereby producing 230+-3 output voltage.sample to be approved before installation.Supply, Installation,Testing and Commissioning of Surface mount 25A MCB Box Protected Socket PVC plastic base incl. 25A plug top,with shutter for child safety and 25 A SP MCB inside a closed box.(Complete Job) |
| 27 | Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws Budloo wood/Fir wood |
| 28 | Carriage of materails By Mech.Transport,50 km from source to site of work SAND/AGGREGATE |
| 29 | Carriage of materails By Mech.Transport,50 km from source to site of work Devri |
| 30 | Electrical Part : Wiring for light polis/fan point/exhaust fan point/call bell point with 2 x 1.5 sqmm PVC Insulated, FRLS copper conductor, 1100 v trade wires, conforming to 15 694, with conductors as per 15 8130 and Insulation as per 15 5831, and having fire performance in accordance with IEC 60332, Si markewith conductors as per 15 8130 and in all accessories, (Havell/ Polycab/APAR/Fenolex/KELURR kabel Anchor or OEM firms holding 150 9001 certification (Quality Management System) and shall be supplied with routine test certificates, and any material not conforming to the specified standards shall be rejected, complete with all accessories as required, single core cable in surface/recessed medium class PVC conduit (including cost of conduit), with modular switch (Legrand Myline/SSK NV/schneider Livia /Crabtree athena make), modular plate, suitable Gi box and earthing the point with 1.5 sq.mm FiRLS PVC Insulated copper conductor single core cable etc. as required. 1 Group A |
| 31 | .Wiring for light/ power plug with 2x4 sq. mm+1X 4 sq. mm earth wire, FRLS PVC insulated copper conductor | Havel/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer Incharge.) single core cable in surface/recessed medium class PVC condult (including cost of conduit) |
| 32 | Supplying and fixing suitable slze Gt box with modular plate and cover in front on Each surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch modular plate, suitable Gl box, connections etc. as required. Modular Switch & Socket:- (Legrand Mylinc /SSK NV/schneider Livla/Crabtree athena make.) |
| 33 | Wiring for lighting circuits/Inverter circults/6-10 amp power plug with 2X2.5 sq. Mtr mm FRLS PVC insulated copper conductor Havell/Polycab/APAR/Fenolex/KE/M kabel/ Anchor make) as described in item no 1 as directed by engineer Incharge.) single core cable in surface/recessed medium class PVC conduit, including cost of conduit) alongwith 1 No. 2.5 sq. mm FRLS PVC Insulated copper conductor single core cable for loop earthing as required. |
| 34 | Supplying and fixing suitable size Gl box with modular plate and cover in front on No. surface or in recess, including providing and fixing 3 pin 5-10 A modular socket outlet and 5-10 A modular switch, connections etc. as required. (For light plugs to be used in non residential bulidings). Modular Switch & Socket: (Legrand Mylinc ssK NV/schneider Livia/Crabtree athena make.) |
| 35 | Supplying and fixing of following modular switch/ socket/indicator on the.existing modular plate and switch box including connections but excluding modular plate etc. as required. 1. 3 pin 5/6A socket outlet |
| 36 | Supplying and fixing of following modular switch/ socket/Indicator on the No. existing modular plate and switch box including connections but excluding modular plates etc as required 1. Indicator |
| 37 | Wiring for circult/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor (Havell/Polycab/APAR/ Fenolex/KEI/RR kabel/ Anchor make). single core cable in surface/recessed medium class PVC conduit as required, including cost of conduit 2 X 1.5 14. mm + 1X 1.5 sq. mm earth wire (Inverter Circuit) |
| 38 | 2 x 2.5 sq. mm + 1X2.5 sq. mm earth wire (lighting Circuit) |
| 39 | 2 x 10 sq. mm + 1X6 sq. mm earth wire (Heating submain) |
| 40 | S/F testing and comm. Of MCB's 10 kA of the below mentioned capacities in sub main controls legrand Schneider/ Legrand /ABB,/Havells/Siemens/L&T/Hager /BCH make OR OEMs/firms holding certification (Quality Management System) as directed by engineer in charge 6-32 Amp SP MCB |
| 41 | 32 amp OP MCB |
| 42 | 63 amp DP MCB |
| 43 | Supply and fixing modular blanking plates on existing modular switch plates, |
| 44 | .Supplying and fixing following way, Horizontal type, Single pole and neutral, sheet steel, MCB distribution board, (legrand/ Shinider/Hager/ ABB make) 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, Interconnections, powder painted including earthing etc.as required, (But without MCB/RCCB/Isolator) 16 way, Double door |
| 45 | Supply Installation testing and commissioning of 12 W + LED Surface/recess, square or round Mounted light luminary fitting shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminum Heat Sink and P.F.>0.95,THD<10%, CCT 5700K, CRI 80. The LED with Useful life of 50000 Hrs at L70, separate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V The Fixture should have In-bullt Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt. approved In-house NABL lab/ government of India. The Job Includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years, which Includes replacement of fixtures of Philips/ Havel's/Wipro make / sample to be approved before Installation.. |
| 46 | Supply, Installation, testing and commissioning of exhaust fan of 200-250 mm sweep suitable for wall/window mounting, complete with necessary frame, mounting arrangement, louvers/shutter, and all accessories as required; the fan shall be of robust construction with high-grade engineering plastic/metal body, aerodynamically designed blades, and heavy-duty copper motor suitable for continuous operation, conforming to relevant Indian Standards and safety requirements of Havell/Bajaj/Crompton/USHA/Orient OR OEMs/firms holding ISO 9001 certification (Quality Management System) as directed by engineer Incharge as per site requirement and necessary connections. |
| 47 | Supply, Installation, testing and commissioning of celling fan of 1200 mm sweep No suitable for 230 V, single-phase, 50 Hz AC supply, complete with all accessories such as down rod of standard/required length, canopy, shackle kit, blades, capacitor, regulator (electronic step type/modular type), and necessary hardware as required; the fan shall be of aerodynamic design with high-quality aluminum blades, dynamically balanced for vibration-free and low-noise operation, driven by a heavy-duty copper motor including iron hook, extension of rod (if required) complete USHA Striker Galaxy/Havells Oyster metallic/Crompton Aura/OR OEMs/firms holding ISO 9001 certification (Quality Management System) and as directed by engineer Incharge. |
| 48 | Supply Installation testing and comm. of flood light 50 W (warm, white), Epoxy No powder coated die-cast aluminum housing (LM24) with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class 1, IP66, IK 07,, with high power LED's as light source with Bulilt-In Potted IP67 electronic LED driver with APFC,lower THD, toughned glass and secondary lens, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV With Built in SPD & other safety test as per 15 15885 Part-2/Sec 13, IEC60598-1. Preferred make: Philips/Havells /Wipro/Crompton make, the job also includes the angle iron stand of suitable size to be grouted in cement |
| 49 | Supply and fixing of 6 amp/250 V AC fan dimmer step type 2 module with No cover plate Anchor Roma plus/SSK NV/ equivalent make. |
| 50 | S/Laying (overhead / underground), testing and commissioning of PVC Insulated/ PVC sheathed/XLPE aluminum cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments. Havell/Eq. standard make as directed by engineer in charge and making end termination with brass compression gland and aluminum lugs of required size.25 sq.mm 2 core (un armoured) |
| 51 | Providing of chemical earthing as per IS standards by way of digging 6 feet pit then embedding 2.5 mtr. Long Gi earthing electrode, 60 mm dia. Connecting the electrode with main control board by 10 SWG Copper wire with 1/2\\" dla. Full thread brass nut and bolts and washers, refilling the pit with chemical Compound. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender