Tender For Special Repair To Unserviceable/ Broken Road, Road Furniture, Road Breaker, Road Sign Board For Maintenance Road At Ayodhya Cantt Under Age (I) Ayodhya.
Tender Value
1.21 Crore
Estimated cost
Bid Submission
07 Sep 2026
25 days left
EMD
1.96 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ayodhya → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Unserviceable/ Broken Road, Road Furniture, Road Breaker, Road Sign Board For Maintenance Road At Ayodhya Cantt Under Age (I) Ayodhya.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for repair to potholes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 Kg per 10 Sqm with paving bituminous primer VG-10 grade and putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm, blinded with 0.09 Cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30mm, complete all as specified and directed. |
| 2 | M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bituminous primer VG-10 grade @ 5 Kg per Ten Sqm on black top road surface and applying 30mm thick (consolidated thickness) bituminous premixed semi dense asphaltic concrete with 5.5% paving bitumen binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller complete all as specified and directed. Note:- (i) Bituminous premix asphaltic semi dense concrete work shall be executed as per design mix as approved by AGE (I).(ii) The binder content specified is minimum. Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to Government.(iii) Premixing shall be done by using Hot Mix plant and laying shall be done by using mechanical paver. complete all as specified and directed. |
| 3 | M&L for scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 Sqm and depth exc 50mm but n. exc. 100mm including stacking usable materials for reuse and removing rubbish to a distance n.exc 50mm, complete all as specified and directed. |
| 4 | M&L for 75 mm thick thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated with 8 to 12 tonne power roller to required gradient ,camber and super elevation required complete all as specified and directed. |
| 5 | All as per item No. 4 above except materials (coarse aggregate). |
| 6 | M&L for preparing unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bituminous primer VG-10 grade @ 10 Kg per Ten Sqm on WBM surface and applying 40mm thick (consolidated thickness) bituminous premixed semi dense asphaltic concrete with 5.5% paving bitumen binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller complete all as specified and directed. Note:- (i) Bituminous premix asphaltic semi dense concrete work shall be executed as per design mix as approved by AGE (I).(ii) The binder content specified is minimum. Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to Government.(iii) Premixing shall be done by using Hot Mix plant and laying shall be done by using mechanical paver. complete all as specified and directed. |
| 7 | M&L for premix bituminous macadam laid, rolled and compacted to required gradient and camber using binder (paving bitumen VG-30) grade with 4% by weight of total mix (consolidated thickness 75 mm or less) all as specified in particular specifications. Note:- (i) Bituminous Macadam work shall be executed as per design mix as approved by GE.(ii) The binder content specified is minimum. Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to Government. If it is less than 4% by weight of total mix, the amount shall be recovered for the less weight of binder only at the rate of Rs 42/- per Kg if technically acceptable. No other claim whatsoever on account of this will be allowe(iii) Bituminous Macadam shall be done by using Hot Mix plant and laying shall be done by using mechanical paver complete all as specified and directed. |
| 8 | Demolition of brick work or stone/ boulder masonry laid dry, complete all as specified and directed. |
| 9 | M&L for brick work with sub class B straight or curve on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed. |
| 10 | M&L for surface dressing n.exc 15 cm deep in soft/ loose soil, complete all as specified and directed. |
| 11 | M&L for rolling and consolidating with power roller exc 2 tonne & not exc 5 tonne formation surfaces in cutting commplete all as specified and directed. |
| 12 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and directed. |
| 13 | Demolition of cement concrete in ground floors and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 14 | M&L for 75mm precast cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate, as in sub base of floor complete all as specified and directed. |
| 15 | M&L for sand filling under interlocking tile, complete all as specified and directed. |
| 16 | M&L for 80mm thick M-40 grade machine pressed factory made precast prelaminated (laqure finish) cement concrete interlocking paver block (vibro compected and rubber moulded) in approved design, size and colour conforming to IS 15658-2006 jointed & pointed with gray cement and pigment as approved laid over sand cushion and joints filled with sand complete all as specified and directed.Note:- Necessary earth work to be maintain the level (if any necessary will be carried out) |
| 17 | All as per item No. 16 above except materials of any size. |
| 18 | M&L for 60mm thick M-35 grade factory made rubber moulded machine pressed precast cement concrete interlocking paver block in approved design and colour conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion and joints filled with sand complete all as specified and directed. |
| 19 | Dismantling of stone slabs and tiles (laid dry or laid dry and pointed) of any description or thickness in stone slabs and tiles of any complete all as specified and directed. |
| 20 | M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in kerb stone of size as per ground requirement or mud stop, rounded or chamfered on edges etc, complete all as specified and directed. |
| 21 | M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed wtih cement mortar 1:3 (1 cement 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed. |
| 22 | M&L for preparation of newly surface of kerb stone plain or moulded n.exc 10 cm width or girth with priming paints and two coat synthetic enamel paint complete all as specified and directed. |
| 23 | S&F in repair for road side convex mirror of minimum 600mm dia (Matrial polycarbonate) mounted on steel pipe 2.10mtr long and dia of pipe is 80mm embedded with PCC type B-1, 1:2:4 (20mm graded aggregate) including RFR, removal including necessary excavation of size (0.3x0.3x0.5) cum and earth work in any type of soil, complete all as specified and directed. |
| 24 | S&F for reflector type solar Cat Eye with LEDs of red/yellow colour on each side (total 06 Nos) housed in a tough pressure die casted aluminium alloy of size/dimension 125mmx125mmx20mm, with built in system of suitable length with LEDs ,solar sells,battery and light senseor duly covered with tough unbreakable poly corbonate transparent sheet on top ,equipped with solar system workable for 2-3 days (night) after full charge of 8-10 hours , fixed on road surface by cutting holes and grouting with epoxy and/on MS stud(as per manufacturer instrctions) in the pattern and the location complete all as specified and directed.Make- Green liight CAT Part No GPL-3-01/ SINOR/ AKTION/ Avery Dension/3M/SN Industries/ Dark Eye. |
| 25 | S&F the kerb stone have dimension of 0.30 in length 0.1m in width and 0.30m in height constructed from high strength M-35 incorperated 6mm thick 40 grade acrylic sheet in milky white for illumination emitting a red blinking light at 400K powered by IP68 LED technologogy the kerb stone operate on solar energy providing a brightness of 60 lumens solar panel will be installation process will include placing them on prepared PCC bed. The kerb stone comply with IS code 5758 and IRC standeard for road singage fixed all as specifed and directed by Engineer-in-Charge. |
| 26 | S&F in repair ABS plastic speed bump/speed breakers 425X500X75mm made out of steady plastic, dovetail interlocking sub units, jointed and fixed to make the bump perfectly uniform, bump made out of pecoloured material (black/yellow) and UV stabizers to keep them perfectly colourful, studded with refectors on either sdie to make it clearly visible to motorists during night hours complete all as specified and directed |
| 27 | Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 28 | M&L for cleaning old/new dirt, oil/ grease spots and foreign materials etc, from road surface and applying 2.5mm thick thermo plastic (retro reflective) road marking paint for marking white traffic lines, straight or curved, having clear and sharp edges over road surfaces by using thermo plastic paint applicator machine and necessary T&P, including cleaning of roads surfaces, heating the paints within temperature limits specified by the manufacturer, making proper arragement for traffic during operation etc. complete all as specified and directed.Make:- Asian/ Nerolac/ Berger Paints.Note:- Thermo plastic paint material shall consist homogeneously composed of pigment, resins and glass reflecting beads in required proportion as per MORTH specification and conforming to relavent IS.(b) The Contractor will made proper arrangement for traffic diversion and safety rules during laving of painting on Roads. |
| 29 | S&F in repair stainless board high intensity reflective sign boards made out of hardend ACP sheet 2mm thick POP riveted to stainless steel rectangular pipe of size 50mmx25mm frame of size 900mmx1200mm. Frame support with bolts over 60mm round 3M long stainless steel sheet parts shall be polished. Sign board shall be reflective on one side with wide HIP sheet and overall film of blue colour with computer cut letters sign and boder all as directed. Two board on single frame are fixed back to back to look as one for D/S board including necessary excavation and earth work and fixing board in cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate having minimum size 250mmx250mmx450mm complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 32 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender