Tender For Comprehensive Maintenance (E/M) Of Certain Trainees Single Living Accn At installation Dronacharya Under Ge Fort Kochi
Tender Value
13.75 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
7 days left
EMD
27500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance (E/M) Of Certain Trainees Single Living Accn At installation Dronacharya Under Ge Fort Kochi
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully defective/ UNSV switch /socket /regulator/bell/bell push/holder/ceiling rose etc any size/type /capacity complete all as specified and as directed. |
| 2 | Supply and fix switch piano, flush type, single pole, one way, 6 Amps, complete all as specified and as directed. |
| 3 | Supply and fix switch piano, flush type, single pole, two way, 6 Amps, complete all as specified and as directed. |
| 4 | Supply and fix switch socket combination outlet multipurpose 2 in 1, 2/3 type 5 pin, 6 Amps flush type complete all as specified and as directed. |
| 5 | Supply and fix switch socket combination outlet multipurpose 2 in 1 ,3/3 type 6 pin, 6 Amps and 16 Amps flush type complete all as specified and as directed. |
| 6 | Supply and fix socket outlet multipurpose 2 in 1,2/3 type 5 pin, 6 Amps flash type complete all as specified and as directed. |
| 7 | Supply and fix socket outlet multipurpose 2 in 1 ,3/3 type 6 pin, 6 Amps and 16 Amps complete all as specified and as directed. |
| 8 | Supply and fix switch piano, flush type, single pole, one way, 16 Amps, complete all as specified and as directed. |
| 9 | Supply and fix electronic Fan regulator stepped type flush type suitable for existing ceiling fans fixed on phenolic laminated sheet etc. as required complete all as specified and as directed. |
| 10 | Supply and fix Modular type electronic Fan regulator stepped, 120 W, 2 module suitable for existing ceiling fans fixed on as required complete all as specified and as directed. |
| 11 | Supply and fix ceiling rose PVC poly carbonate, isolated body with two to three terminals including connection complete all as specified and as directed. |
| 12 | Supply and fix lamp holder, PVC / Poly carbonate type, with cord grip cap suitable for pendent/batten/angle fittings complete all as specified and as directed. |
| 13 | Supply and fix Bell push, flush type, 5 Amps complete all as specified and as directed. |
| 14 | Supply and fix bell ding dong, AC. 230 volts, single pole complete all as specified and as directed. |
| 15 | Supply and fix Modular switch 1-way 6A,1 module complete, all as specified and as directed. |
| 16 | Supply and fix Modular switch 1-way 16A,1 module complete, all as specified and as directed. |
| 17 | Supply and fix Modular switch 2-way 6A,1 module complete, all as specified and as directed. |
| 18 | Supply and fix Modular Bell push 6A 1 module complete all as specified and as directed. |
| 19 | Supply and fix modular Socket, 6A - 2/3 type 5 pin combined 2 module, complete all as specified and as directed. |
| 20 | Supply and fix modular Socket 6A/16A - 3/3 type 6 pin combined 2 module, complete all as specified and as directed. |
| 21 | Taking down carefully defective/ UNSV MCB any size/ type/ capacity complete, all as specified and as directed. |
| 22 | Supply and fixing amp rating 240 Volt, current carrying breaking capacity 10 kA, 'C' curve MCB SP 6 to 32 Amps complete all as specified and as directed. |
| 23 | Supply and fixing amp rating 240 Volt, current carrying breaking capacity10 KA,'C' curve MCB SPN, 32 Amps, complete all as specified and as directed. |
| 24 | Supply and fixing amp rating 240 Volt, current carrying breaking capacity10 KA,'C' curve MCB SPN, 40 to 63 Amps, complete all as specified and as directed. |
| 25 | Supply and fixing amp rating 415 Volt, current carrying breaking capacity10 KA,'C' curve MCB TPN, 16 to 32 Amps, complete all as specified and as directed. |
| 26 | Supply and fixing amp rating 415 Volt, current carrying breaking capacity10 KA,'C' curve MCB TPN, 40 to 100 Amps, with MCB DB fixing and testing complete all as specified and as directed. |
| 27 | Taking down carefully defective/ UNSV Light fittings any size/ type / capacity complete, all as specified and as directed. |
| 28 | Supply and fixing surface mounted LED batten 4 feet long, 20 Watt comprises of Poly carbonate housing, integrated electronic driver, diffuser etc and all accessories pre-wired three core copper conductor cable including connecting up suitable size from ceiling rose complete all as specified and as directed. |
| 29 | Supply and fixing recess mounted downward light fixed Decorative type LED batten 16/18/20 Watt comprises of Poly carbonate housing, integrated electronic driver, diffuser etc and all accessories pre-wired three core copper conductor cable including connecting up suitable size from ceiling rose complete all as specified and as directed. |
| 30 | Supply and fixing surface mounted LED batten 2 feet long, 10 Watt comprises of Poly carbonate housing, integrated electronic driver, diffuser etc and all accessories pre-wired three core copper conductor cable including connecting up suitable size from ceiling rose complete all as specified and as directed. |
| 31 | Supply and fix Decorative wall light fixture made up of Polycarbonate comprises of high efficiency diffuser and all accessories pre-wired including connecting up including 1x9 watt LED lamp complete, all as specified and as directed. |
| 32 | Supply and fix LED building security light fitting 25 watts protection comprises of a pressure die cast aluminium housing, polycarbonate cover, high power LED with lenses, 10KV built-in-surge protection, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections complete all as specified and as directed. |
| 33 | Supply and fix LED bulk head luminaries, with lamp holders and 1x 9-watt LED lamp etc complete with all accessories and including connecting up with twin core copper conductor cable with suitable size of 230 V, 50 Hz complete all as specified and as directed. |
| 34 | Supply and fix in replacement of 3 mm thick ISI marked laminated sheet cover and brass screw with cup washers for fixing switches/sockets/regulators etc cut to suitable size, cutting holes for fixing switches, regulators, sockets etc. complete all as specified and as directed. |
| 35 | Taking down carefully defective/ UNSV MCB DB/sheet metal plug socket any size/type /capacity complete all as specified and as directed. |
| 36 | Supply and fix in replacement of MCB DB double door made of sheet steel phosphates, powder painted with bus bar, neutral link, earth bar and rail double door type TPN 415 volts 4 way fixed concealed/ recessed having IP-43 protection including cement mortar 1:3 for making good to disturbed surface match with existing surface including colouring complete all as specified and as directed. |
| 37 | `-Ditto- all as per item above but 240 Volts SPN 8-way, complete all as specified and as directed. |
| 38 | `-Ditto- all as per item above but 240 Volts SPN 12-way, complete all as specified and as directed. |
| 39 | Supply and fix in sheet metal enclosure with two pin and earth plug and socket complete with one MCB 20 Amps single pole having breaking capacity 10 KA complete all as specified and as directed. |
| 40 | Material and labour in replacement for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3mm thick, buried directly in ground (earth pit not less than 2.25m below ground level) with top edge of the plate not less than 1.5m normal ground level, connected to GI strip 32x6mm size as earth lead by means of bolts, nuts , check nuts and washers of GI or steel as shown in electrical plate No 3 connected to earthing test point, testing, (Earthing shall be interconnected) including necessary excavation,50mm thick RCC 1:2:4 cover reinforced with 8mm TMT bars 100 mm c/c in both ways at , salt, charcoal, removal of surplus soil etc including taking out old earth plate complete all as specified and as directed. |
| 41 | Supply and fix in replacement of up to 20 mm size ISI marked PVC casing capping including all fittings and fixing accessories complete all as specified and as directed. |
| 42 | Supply and fix in replacement of 25 mm size ISI marked PVC casing capping including all fittings and fixing accessories complete all as specified and as directed. |
| 43 | Supply and fix in replacement of 32 mm size ISI marked PVC casing capping including all fittings and fixing accessories complete all as specified and as directed. |
| 44 | Taking down copper/aluminium point wiring (light, fan, socket etc) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, lamp holder etc, re-fixing removed fittings and making good the disturbed surface of wall to match with existing surface complete all as specified and as directed. |
| 45 | Taking down submain wiring of any type complete all as specified and as directed. |
| 46 | Material and labour for point wiring surface type with single core 1.5 Sqmm PVC insulated unsheathed single core multistranded copper conductor cable (FRLS) including 1.5 Sqmm PVC insulated unsheathed copper conductor as earth continuity conductor drawn in and including ISI marked PVC casing caping not less than 25 mm width with its accessories, and fixed in existing sunk boxes and covered with new 3.00 mm thick ISI marked laminated sheet cover and brass screw with cup washers for fixing switches/sockets/regulators etc. complete all as specified and as directed. |
| 47 | One light point /ceiling fan/ exhaust fan/bell point controlled by one switch etc |
| 48 | One light point controlled by two 2-way switches |
| 49 | One 5 Amps socket outlet point on same board along with other switch. |
| 50 | One 5 Amps socket outlet point on independent board controlled by one switch. |
| 51 | `Ditto- all as per srl item no 46 here-in-before but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16-amp socket. |
| 52 | Material and labour for point wiring in existing conduit/ PVC casing caping concealed or surface type with PVC insulated, unsheathed, single core multi-standard copper conductor cable (FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through existing PVC conduit/casing caping and fixed in existing sunk boxes and covered with new 3.0mm thick ISI marked laminated sheet cover and brass screw with cup washers for switches/sockets/regulators etc. complete all as specified and as directed. |
| 53 | One light point /ceiling fan/ exhaust fan/bell point controlled by one switch etc |
| 54 | One light point controlled by two 2-way switches |
| 55 | One 5 Amps socket outlet point on same board along with other switch. |
| 56 | One 5 Amps socket outlet point on independent board controlled by one switch. |
| 57 | `Ditto- all as per srl item no 48 here-in-before but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16-amp socket. |
| 58 | Disconnection of electrical wire from the ceiling rose and taking down the ceiling Fan of any capacity/ type/ size, make moreover dismantling the ceiling Fan for removing of old lubricating substance from bearing/bush and applying fresh lubrication using grease to avoid noise free smooth functioning, including replacement of burning out / worn out copper winding and existing same gauge of copper wire winding / unserviceable spares as required and replacement of PVC insulated, unsheathed multi stranded twin twisted copper conductor cable of size 1.5 Sqmm up to 0.5m long including testing the repair ceiling fan to the entire satisfaction of engineer in charge and refixing the ceiling fan in own position with provision of hanging bush, cotter pins, nut , bolts washers etc complete all as specified and as directed. (Note: rewinding of ceiling fan and PVC wire from making connection and other spares shall be measured and paid separately under respective item.) |
| 59 | Rewinding of the ceiling fan 230 volts of any capacity/ make/type and size (1200/1400 mm sweep) with existing same gauge copper wire winding and number of turns as to obtain the specified and satisfactory as per manufacture’s specification, including replacement of all insulation materials, varnishing, heating, drying, reassembling of stater/rotor complete all as specified and as directed. Note: Ceiling fan before fix at site the RPM shall be checked and match as per manufactures specification till entire satisfaction of Engr in charge |
| 60 | Carrying out re metalling in worn out shaft, cutting and polishing to make the shaft suitable for fixing of new ball bearing and replacement of bushing system in ceiling fan and assembling the same and testing to entirely satisfaction of Engineer in change. (Note: bearing shall be measured and paid separately) |
| 61 | Supply only ball bearing of any capacity / size and type, suitable for any capacity type/make/size of ceiling fan , complete all as specified and as directed. Make - TATA/NBC/SKF |
| 62 | Supply only capacitor capacity 2.5 MFD, 230-volt ISI marked complete all as specified and as directed. |
| 63 | Supply only PVC insulated, unsheathed multistranded twin twisted copper flexible cable of size 1.5 Sqmm complete all as specified and as directed. |
| 64 | Supply only suitable size of bush for ceiling fan of any type/size obtained from Sl. item No.1 complete all as specified and as directed. Make - TATA/NBC/SKF |
| 65 | Supply only PVC connector 4 way 6 Amps with connection screws, nuts. etc complete all as specified and as directed. |
| 66 | Supply only PVC clamps with fixing screws for holding capacitor of any type and size, complete all as specified and as directed. |
| 67 | Supply only in replacement of heavy-duty Steel & rubber fan to ceiling hook attachment clamp with fan rod nut bolt & locking pins complete set, complete all as specified and as directed. |
| 68 | Supply only ceiling fan blades of 1200/1400mm size of existing Make including proper alignment and colour matching painting with existing ceiling fan complete all as specified and as directed. |
| 69 | Supply only PVC canopy suitable for ceiling fan of any type/make for both end of down rod including fixing screws complete all as specified and as directed. |
| 70 | Supply only ceiling fan down rod 45cm to 1.0 mtr long, high durability powder coated heavy duty, suitable to fixing for ceiling fan of any type/make, including fixing screws as per site requirement complete all as specified and as directed. |
| 71 | Cleaning of ceiling fan assembly of any capacity type/size and carrying out two coats of spray painting with first quality synthetic enamelled paint of approved colour, including writing of MES number in black paint complete all as specified and as directed. |
| 72 | Disconnection of electrical wire from the ceiling rose and taking down the exhaust fan of any capacity/type/size, make moreover dismantling the exhaust Fan for removing of old lubricating substance from bearing/bush and applying fresh lubrication using grease to avoid noise free smooth functioning, including replacement of burning out/ worn out copper winding and existing same gauge of copper wire winding /unserviceable spares as required and replacement of PVC insulated, unsheathed multi stranded twin twisted copper conductor cable of size 1.5 Sqmm up to 0.5 M long including testing the repair exhaust fan to the entire satisfaction of engineer in charge and refixing the exhaust fan in own position with provision of as per site requirement including nut , bolts washers etc complete all as specified and as directed. (Note: rewinding of exhaust fan and PVC wire from making connection shall be measured and paid separately under respective item.) |
| 73 | Rewinding of exhaust fan up to 350 mm sweep 230 volts , of any make/type a with super enamelled copper wire of appropriate gauge and number of turns as existing to obtain the specified and satisfactory RPM as per manufacture’s specification, including replacement of all as per required worn out material, replacement of all insulation materials, varnishing, heating, drying, reassembling of exhaust fan and fitting, connection & testing complete all as specified and as directed. Note: exhaust fan before fix at site RPM should be checked and match as per manufactures specification till entirely satisfaction of Engr in charge |
| 74 | Supply only exhaust fan metal body blade of up to 350 mm size of existing Make including proper alignment matching with existing exhaust fan complete all as specified and as directed. |
| 75 | Supply only of louver shutter made of MS sheet metal 1.2 mm thick for round base and 0.8 mm thick for flaps, comprising of mounting legs frames made o MS flat strips of size 25mm x 3mm including heavy duty rust proof passivated bolts of size 50 mm long 8 mm dia to be fixed on wall after drilling, and duly painted by two coat of synthetic enamelled paint (spray painting) over a coat of primer for exhaust fan up to 300/380/450 mm sweep complete all as specified and as directed. |
| 76 | Material and labour for exhaust fan motor suitable for PVC body air freshener/exhaust fan up to 250 mm sweep and RPM match with existing including requirement of spare parts taking down old motor and fixing of new motor with proper alignment and refixing the same using necessary mounting screws and accessories without any vibrations and noise to the complete all as specified and as directed. |
| 77 | Supply only PVC body fan blade of 250 mm size for air freshener/exhaust fan existing Make including proper alignment matching with exhaust fan complete all as specified and as directed. |
| 78 | Material and labour for sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked PVC casing caping with all necessary accessories such as bends, tees, elbows etc complete all as specified and as directed. (Note: - Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC casing caping with all necessary accessories will be measured as one length). |
| 79 | Material and labour for sub main wiring in existing surface/recessed steel/PVC conduit/casing caping with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity complete all as specified and as directed. (Note: - Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire will be measured as one length). |
| 80 | Supply and fix in replacement of PVC rectangular block for mounting, switches, sockets, fan regulators etc. with 3 mm thick plastic laminated sheet cover of size 200 mm x 150 mm x 50 mm deep complete all as specified and as directed. |
| 81 | Supply and fix in replacement of PVC rectangular block for mounting, switches, sockets, fan regulators etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm x 50 mm deep complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender