Tender For Repair Of Chhajja, Parapet, Grouting Plaster, Joinery, Plinth Protection Etc In Pocket 9 In Age B/R Saharanpur Under Ge Roorkee
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Aug 2026
8 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Saharanpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Chhajja, Parapet, Grouting Plaster, Joinery, Plinth Protection Etc In Pocket 9 In Age B/R Saharanpur Under Ge Roorkee
BOQ
| Sl. No. | Item Description |
| 1 | S&F powder coated ceiling grid system of grid size 600x600 mm fixed to walls with rawl plugs and screws and hang to roof members with 3 mm dia GI wire comprising main tee of size 38 mm x 24 mm x 0.30 mm, cross tee of size 28 mm x 24 mm x 0.40 mm with and incl S&F 10 mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid fillets complete all as specified and directed. |
| 2 | M&L for roof treatment with polymeric membrane (APP based) with non woven polyester mat as reinforcement with following:-(a) taking down of existing treatment of tar felt/tiling/PCC padding/loose particle any nos of layer to ensure or clean smooth and dry surface and preparing the surface by cleaning with water complete.(b) M&L for providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface.(c) M&L for providing & laying APP based polymeric membrane of 3 mm thickness of weight of 3.0 Kg/Sqm with non woven polyster fiber as reinforcement on primed surface by torch application with 110mm side over laps &110mm joints over laps etc as per manufacturers instruction.(d) M&L for finishing of top surface by two coat of aluminium paint over a coat of blown bitumen 85/25 grade @ 1.2 Kg/ Sqm grouted all as specified and as per manufacturers instruction.(e) Test with filling of water over roof slab continuously for 48 hours all as specified and directed. |
| 3 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level)complete all as specified and directed. |
| 4 | M&L PCC (1:2:4) type B-1 using 20 mm grade stone aggregate as in coping, weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed. |
| 5 | M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundations, filling, mass concrete and sub base of floor complete all as specified and directed. |
| 6 | M&L for precast machine pressed cement concrete interlocking paver blocks of any shape and size confirming to IS:15658 of 60 mm thick M-35 grade, glossy type with grey cement and no pigment laid dry over and including a layer of 25 mm thick sand cushioning complete all as specified and directed. |
| 7 | M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in floor, hard standing, plinth protection etc 75 mm thick finished even and smooth without using extra cement laid in alternate bays n'exc 2.50 Sqm and joints filled with mastic filling complete all as specified and directed. |
| 8 | M&L PCC (1:2:4) type B-2 using 40 mm graded stone aggregate as in top floor 100 mm thick finished even and fair laid in alternate bays, with spike rolling to surfaces or making impression of expended metal whilst the concrete is green complete all as specified and directed. |
| 9 | Demolition of Brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 10 | M&L for brick work in CM 1:6 using Sub class ‘B’ Bricks straight or curved on plan exc 6 m mean radius complete all as specified and directed. |
| 11 | Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed. |
| 12 | M&L for 15 mm thick rendering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 13 | M&L for 15 mm thick rendering on Brick masonry on fair faces of brick wall for external in CM 1:4 finished even and fair without using extra cement, complete all as specified and directed. |
| 14 | M&L for rendering 5 mm thick on ceiling surfaces in cement mortar 1:3 finished even & fair all as specified and directed. |
| 15 | M&L for preparation of newly plastered surfaces of walls by applying two coats of oil bound distemper of approved colour/ shade over a coat of wall primer complete all as specified and directed. |
| 16 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of cement base primer complete all as specified and directed. |
| 17 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 18 | M&L for preparation of old plaster surfaces of walls, and applying one coat of oil bound distemper complete all as specified and directed. |
| 19 | M&L for preparation of old Plaster surfaces of walls, and applying one coat of cement base paint complete all as specified and directed. |
| 20 | Taking down mud plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 21 | Mud plastering 25mm thick on wood laths, reed walling, wire netting, etc. (one side only) and on rubble masonry (in one coat) on walls partitions etc as specified complete all as specified and directed |
| 22 | Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 23 | M&L for Non-skid Ceramic joint free colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 24 | M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in CM (1:4) with grey pigment cement and pigments complete all as specified and directed. |
| 25 | M&L for Coloured Glazed ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) with grey pigment cement and pigments complete all as specified and directed |
| 26 | M&L for Coloured Glazed ceramic tiles 6 to 8mm thick of size 450x300mm in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) with grey pigment cement and pigments complete all as specified and directed |
| 27 | Dismantling timber fillets, post, rafter, purlins etc under 40 sq. cm in section framed work in any position complete all as specified and directed. |
| 28 | Demolition of cement concrete (reinforced) of any position not otherwise specifically provided for and including reinforcement required to facilitate demolition upto and including fourth story and on the roof top/mumty/parapet/ chajja/ sunshade and removal of debris complete all as specified and directed. |
| 29 | M&L for MS square pipe frame for chajja as in door sunshade (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including fixing to wall/column/beam/chajja with nut/bolt/screw or welding, cutting grooves as per site requirement, filling & compacting with cement concrete (1:2:4) where ever required and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and directed. |
| 30 | Taking down asbestos (corrugated, semi-corrugated etc) sheets in roof covering complete all as specified and directed. |
| 31 | S&F Pre-painted galvalume aluminum 150 AZ zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/chajja/sunshade, fixed with self tapping screws including cutting grooves in brick wall/any portion of building as per site requirement and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and directed. |
| 32 | M&L for cutting out cracks to \\"V\\" section in existing roofs or terrace, cleaning out, wetting, grouting with cement and sand slurry (1:3) complete all as specified and directed. |
| 33 | Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and directed |
| 34 | Ditto all as per above but exc. 1.5 sqm but not exc 4 sqm |
| 35 | S&F for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification & drawing complete all as specified and directed. |
| 36 | S&F for solid PVC door frame of size, 50x47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and directed. |
| 37 | S&F PTMT butt hinges 100 mm complete all as specified and directed. |
| 38 | S&F PTMT Tower Bolt 150 mm complete all as specified and directed. |
| 39 | S&F PTMT door handles 125 mm complete all as specified and directed. |
| 40 | M&L for resecuring or easing of door/window shutter n.exc 1.00 sq m in size without taking down and making operation in all respects complete all as directed. |
| 41 | M&L for resecuring or easing of door/window shutter exc 1.00 and n.exc 2.00 sq m in size without taking down and making operation in all respects complete all as directed. |
| 42 | S&F for pressed steel frame size 105x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc complete all as specified supplied and fixed. |
| 43 | S&F for pressed steel frame size 125x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed. |
| 44 | S&F for factory made Flush shutters, solid core construction 30mm thick with block board core and plywood face panels, commercial type on both sides conforming to IS-2202(Part-I), complete all as specified and directed. |
| 45 | S&F for 35 mm thick IInd class HW Factory Made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed. |
| 46 | S&F in repair Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 47 | S&F in repair Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed. |
| 48 | S&F for Mild steel, 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed as directed. |
| 49 | S&F for 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised as specified and as directed. |
| 50 | S&F for 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed |
| 51 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed. |
| 52 | Supply only stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks,or galvanised wire staples complete all as specified and directed. |
| 53 | S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks,or galvanised wire staples complete all as specified and directed. |
| 54 | M&L for preparation of newly steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 55 | M&L for preparation of newly wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 56 | M&L in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty in aluminium door complete all as specified and as directed. |
| 57 | S&F in repairs door closer hydraulically aluminum (extruded section body) regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed. |
| 58 | S&F in repair Curtain rod Stainless steel fancy type curtain rod 20 mm dia incl Brackets and knobs complete all as specified and directed. |
| 59 | S&F in repair 15mm dia bore CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 60 | S&F in repair CP mixer (Sink mixer) for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. |
| 61 | S&F in repairs brass chromium plated bib tap (short body) for iron pipe of 15 mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed. |
| 62 | S&F in repairs brass chromium plated bib tap (long body) for iron pipe of 15 mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed. |
| 63 | S&F in repairs 10 ltrs PVC (White) valve less symphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embedded in wall with drilling machine etc complete all as specified and directed. |
| 64 | Taking up/down 20mm bore GI pipe complete all as specified and directed. |
| 65 | M&L GI tubing ISI marked medium grade 20 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified and directed. |
| 66 | Taking up/down 15mm bore GI pipe complete all as specified and directed. |
| 67 | M&L GI tubing ISI marked medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified and directed. |
| 68 | S&F in repairs looking mirror 600x450x5mm thick with aluminium channel frame, selected quality mounted on 6 mm thick commercial ply wood back and fixed with chromium plated brass screws and cup washers complete all as specified and directed. |
| 69 | S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm® complete all as specified and directed |
| 70 | S&F in repairs plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and directed. |
| 71 | S&F in repair for 75mm dia PVC(SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 72 | S&F in repairs Health Faucet 8 mm dia 1.2 mtr long PVC flexible tube & wall hook complete all as specified and directed. |
| 73 | S&F in repairs CP toilet paper holder complete all as specified and directed. |
| 74 | S&F in repairs 1000 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl 20mm PTMT ball valve hoisted and fixed in position including dismantling complete all as specified and directed. |
| 75 | S&F in repairs 500 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl 20mm PTMT ball valve hoisted and fixed in position including dismantling all as specified and directed. |
| 76 | S&F in repair vitreous china squatting pan (Orissa pattern) long pan including connection to trap, and to flushing pipe, anti-syphonage pipe etc incl making good to floor fixed in repair size 580x440mm white with integral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush) complete all as specified and directed. |
| 77 | S&F in repairs, vitreous china wash hand basin, white flat back size 550x400mm excluding pillar tap but including waste coupling, waste pipe and a pair of MS bracket painted with 02 coats of synthetic enamel paint over 01 coat of red oxide primer etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender