Tender For Provn Of Modern Utility Wall Decorative & Architectural Work At Saradhana Road Under Ge (North) Meerut Cantt
Tender Value
9.62 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
18 days left
EMD
19250
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Modern Utility Wall Decorative & Architectural Work At Saradhana Road Under Ge (North) Meerut Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth & getting out in soft soil complete all as specified and directed. |
| 2 | Surface excavationn exc (not exceeding) 30cm deep and avergeging 15cm deep and getting out in soft loose soil complete all as specified and directed. |
| 3 | M&L PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in foundations, fillings and Mass concrete complete all as specified and directed. |
| 4 | M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 5 | M&L RCC design mix M-25 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 6 | M&L RCC design mix M-25 (using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 7 | Use & waste formwork for rough finished surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beam and similar work; vertical or to batter complete all as specified and directed. |
| 8 | Use & waste formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide complete all as specified and directed. |
| 9 | S&F of Reinforcement TMT Steel bars of grade Fe-500/Fe-500 D of 10mm dia and over, cut to length, bent to shape required, incl cranking,bending , spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed. |
| 10 | S&F of Reinforcement TMT Steel bars of grade Fe-500/Fe-500 D of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, incl cranking,bending , spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed. |
| 11 | M&L for 18- 20mm thick Granite Red stone best quality (colour and texture as per direction by Engr in Charge/GE) machine cut in plateforms, jambs, pillars, window-cills, top of shelves and like laid over 15mm thick screed bed or backing coat in cement mortar (1:4)and jointed with grey cement slurry and pointed in white cement and with admixture of pigments to match with shade of granite stone including grindingnbull nosing and polishing complete all as specified and directed. |
| 12 | S&F of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc Fe-410- W(Gde- E-250) quality- B., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 13 | M&L for preparation of New or previously untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 14 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 15 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 16 | M&L for Rendering 15mm thick other than fair faces of Brick work of concrete surface in cement mortor 1:4 finished even & smooth w/o using extra cement complete all as specified and directed. |
| 17 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including 2mm thick wall care putty complete all as specified and directed. |
| 18 | S & F bold metallic 3D brass letters or alphabetes mirror finished made out of brass of suitable width not less than 150mm and depth/thick not less than 8mm based on height of letter ( made to shape by using computerised cutting), height of letter not less than 12 inch in Hindi and English languages and fixed on granite/tiled/stone wall cladding finished wall elevated from surface complete all as specified and as directed. |
| 19 | M&L for supply, fabrication, finishing and installation of decorative architetural components for modern utility wall complete all as per drg attached with follwing :- (i) Decorative laser cut metal artwork 03 Nos (ii) ACP utility signage boards 03 Nos (iii) Decorative CNC jalli panels 03 Nos (iv) Vertical decorative feature panel - 01 Job (v) Metal framing & support fabrication (vi) Painting and powder coating |
| 20 | M&L for point wiring with 1.5 Sqmm (nominal cross section area) single core, multi stranded PVC insulated, unsheathed copper conductor, FRLS cable in and including in rigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all steel conduit accessories / fittings and sunk pressed steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVC insulated, unsheathed 1.5 Sqmm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic sheet screwed with brass screws, cup washers complete all as specified and directed for the following :- |
| 21 | One light/exhaust/ fan point controlled by one, one way switches 5/6 Amps. |
| 22 | One 3 pin 5/6 Amps socket outet point on independent board, controlled by one, one way 5/6 Amps switch. |
| 23 | One 3 pin 5/6 Amps socket outet point on same board, controlled by one, one way 5/6 Amps switch. |
| 24 | S&F Modular Switch, 1 module, 10A, AC, 240V, one way ISI Marked complete all as specified and directed.. |
| 25 | S&F Modular Socket, 2 module, 10A, 3 pin combined, AC, 240V, ISI Marked complete all as specified and directed. |
| 26 | Supply and fixing in repair LED POST TOP LANTERN 40W, IP-65 including all accessories for fixing complete all as specified and directed. |
| 27 | S&F inverted pyramid tripod type bollard LED Garden light powder coated body,upto 800mm,IP65 thick acrylic sheet molded body finished incl pcc foundation excavation etc complete all as specified and directed. |
| 28 | S&F in repairs 100 Watt pressure die cast LED flood light luminaire IP 65 ,Efficacy 100lm/watt incl suitable OD GI pipe bracket, two nos mounting clamps with nuts, bolts and washers complete all as specified and directed. |
| 29 | Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 ,IK08 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as directed. |
| 30 | Supply and fixing MCB, SP, AC, 240 volts \\"C\\" series capacity of 06 to 32Amps, 10kA and making connections complete all as specified & directed. |
| 31 | Supply and fixing sign board of any size including profile light fittimgs and all connected accessories, complete all as specified and directed. |
| 32 | S&F in repairs, 1100 volts grade heavy duty PVC sheathed stranded Aluminium conductor twin core cable flat or circular of size 06 Sqmm, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender