Tender For Repair/Maint To High Tension (Ht) Kv System, Breakers, Rmus, Repair/Rewinding Of Distribution Transformers, Dehydration/Topping Up Of Transformer Oil Including Allied Works Under Ge Dssc Wellington
Tender Value
44.40 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
8 days left
EMD
88800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint To High Tension (Ht) Kv System, Breakers, Rmus, Repair/Rewinding Of Distribution Transformers, Dehydration/Topping Up Of Transformer Oil Including Allied Works Under Ge Dssc Wellington
BOQ
| Sl. No. | Item Description |
| 1 | M & L for Cross arms bracing supports clamps and back plates fabricated from structural steel sections including nut bolt washers welding bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and including one primer coat of red oxide zinc chrome primer, one under coat and one finishing coat of aluminium paint including dismantling cross-arms of M.S. channel or angle sections etc complete all as specified and directed. |
| 2 | S & F in repair Pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 150mm height, 150mm dia for 11000 volts grade complete all as specified and directed. |
| 3 | S & F Lightning arresters expulsion type non linear metal oxide type complete with all fittings, transmission/distribution class, discharge capacity 65 kilo amp suiotable for upto 11 kV outdoor/ indoor type including necessary connections and fittings all as per IS-3070 Part-III and IEC 1994 including dismantling of old unserviceable lightening arrester including strap bolts, nuts and washers etc complete all as specified and directed. |
| 4 | Taking down after disconnection of 11 KV, GOD from existing two/four pole structure and Supply & fix Air Break, Gang operated, Triple pole, 11 KV switches/device, mechanically operated, mounted on insulator and steel frame, with operating mechanism of GI tubing 25 mm suitable length worked from ground level including locking accessories complete for current rating up to 400 Amps complete with 12 insulators all as specified and directed. complete all as specified and directed. |
| 5 | M & L for Anti climbing devices; comprising 2.24mm dia galvanised steel 2- strand barbed wire with 2.00mm dia barbs wrapped spirally round poles, to a length of 0.5 to 1.0 metre including clamped and properly secured or as ordered including dismantling of existing one complete all as specified and directed. |
| 6 | M & L for expulsion fuse single pole (Drop out fuse), single pole, 11000 Volts, 100 Amps including dismantling the old unserviceable fuse complete all as specified and directed. |
| 7 | M & L for servicing the existing Gang operated Air Break switch, operated from ground level, of any type/capacity, 11 KV, 3 Pole, including greasing or by applying petroleum jelly, replacing worn out/damaged/rusted contacts (both Male & Female), nuts, bolts, washers, etc. and providing coloured sleeves for jumper connections complete all as specified and as directed. |
| 8 | M & L tinned copper flexible jumper of current rating 200A/400A (as per ground requirement) of minimum 2 mtr length suitable RYB heat shrink sleeves for operating voltage 11 KV, after carefully removing the old unserviceable flexible jumpers from AB switches complete all as specified and as directed |
| 9 | S & F in repair for danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with MS clamps, bolts and nuts of approved size for HT, 25 x 20 cm size complete all as specified and directed. |
| 10 | Supply and Laying in repair synthetic Rubber Insulated mats, 2.5 mm thick of size 2m x 1m for voltage upto 11 KV for electrical purpose as per IS-15652-2006 (Superseeding IS-5424) suitable for electrical shock safety complete all as specified and directed. |
| 11 | Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 11000 volts grade with stranded aluminium conductor of size 95 Sqmm 3 core including taking out/down existing cable complete all as specified and directed. (Note: Excvation and earth work shall be measured and paid seperately) |
| 12 | Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 11000 volts grade with stranded aluminium conductor of size 120 Sqmm 3 core including taking out/down existing cable complete all as specified and directed. (Note: Excvation and earth work shall be measured and paid seperately) |
| 13 | Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 11000 volts grade with stranded aluminium conductor of size 185 Sqmm 3 core including taking out/down existing cable complete all as specified and directed. (Note: Excvation and earth work shall be measured and paid seperately) |
| 14 | S & F in replacement Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as specified and directed (Excavation and earth work shall be measured and paid seperately) |
| 15 | S & F in replacement Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm complete all as specified and directed (Excavation and earth work shall be measured and paid seperately) |
| 16 | S & F in replacement Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as specified and directed (Excavation and earth work shall be measured and paid seperately) |
| 17 | S & F in replacement Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm complete all as specified and directed (Excavation and earth work shall be measured and paid seperately) |
| 18 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, trenches for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 19 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed. |
| 20 | Removing excavated soil not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 21 | Supply & Spreading clean dry riddled soil in trenches for cushioning for under ground cables protections (below, above and around the cable laid in trenches) complete all as specified and directed.(Note: Thickness after punning down shall be measured for payment) |
| 22 | Supplying and laying un-reinforced precast concrete cable cover, class HV, type 1 flat, size 300mm x 180mm x 40mm complete all as specified and directed. . |
| 23 | M & L for cutting the existing hardstanding/PCC/WBM road at a depth of not less than 75 cm & 30 cm in width for passing of HT cables through GI pipes, returning filling in, complete incl finishing the surfaces by providing cement concrete type B1 (1:2:4) with using 20 mm graded aggregate upto 20 cm, finishing to a uniform smooth surface complete all as specified and directed by the Engr-in-Charge. |
| 24 | M & L for loose filling with Broken stone or boulders of gauge 40 to 80 mm in soakage well complete all as specified and directed. Please Enable Macros to View BoQ information |
| 25 | M & L for loose filling with Broken stone or boulders of gauge 40 to 80 mm in soakage well complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender