Tender For Replacement Of Over Head Lt Line With Under Ground Cable In Aor Of Ftr Hq Bsf Salbagan. ( Sh : 81 Bn Gen Room To 81 Adm Block, Gate No-04 )
Tender Value
17.31 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
1 days left
EMD
34621
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Over Head Lt Line With Under Ground Cable In Aor Of Ftr Hq Bsf Salbagan. ( Sh : 81 Bn Gen Room To 81 Adm Block, Gate No-04 )
BOQ
| Sl. No. | Item Description |
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.(a) 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 3 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 4 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required a) 3.5 X 35 sq. mm (32mm) |
| 5 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required b) 3.5 X 50 sq. mm (35mm) |
| 6 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required c) 3.5 X 120 sq. mm (45mm) |
| 7 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required d) 3.5 X 185 sq. mm (57mm) |
| 8 | Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required.(i) Above 6.5 metre and upto 8.0 metre |
| 9 | Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required |
| 10 | Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size 3.5 x 70 sq mm direct in the existing RCC/ HUME/ METAL/ pipe/ Open in air/sadling as required. Make Havells/KEI/Polycab etc. |
| 11 | Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size 3.5 x 95 sq mm direct in the existing RCC/ HUME/ METAL/ pipe/ Open in air/sadling as required. Make Havells/KEI/Polycab etc. |
| 12 | Making of the hole inside the road (Bitumin / PCC ) for laying of Under ground cable in Suitable HDPE/GI pipe without damaging of road. |
| 13 | Supplying and laying of 1.1 KV H4 grade aluminium conductor XLPE insulated Aerial Bunched Cables, heat treated, stranded and compact shape with insulated messenger as per IS: 14255/1995 with latest ammendmant on the existing 8 mtrs RCC/PCC poles. (a) 3C x 150 Sqmm+1C x70 Sqmm |
| 14 | Supplying of 8 mtr PCC pole, rectangular shape, customized design, compressive strength M42, working load 200 Kg and minimum tensile strength 1715 N/sqmm. |
| 15 | Supplying and fixing of Pearcing connector medium size for looping from Aerial bunch cable size off 150 Sqmm as required. |
| 16 | Providing and fixing of Suspension clamp for 1.1 KV H4 grade aluminium conductor XLPE insulated Aerial Bunched Cable on the 8 Mtr existing RCC/PCC/Steel tubuler poles as required |
| 17 | SITC of various sizes water protected outdoor hut type joint box both side opening having depth up to 400 mm suitable for 415 Volt, 3 phases, 50 Hz made out of 16 SWG thick CRCA sheet with required hardware duly painted with powder coated . Panel having end termination as per cable of size,angle iron base frame made out of 50mmx50mmx6 mm angle iron of suitable size of the feeder pillar (minimum height 100 cm), led pilot light for phase indicator (R,Y,B) on top, 100A/415V 4 strip aluminum bus bar duly PVC sleeved. Panel grouting the legs in existing floor with 1:3:6 cement concrete foundation etc complete as required (Panel should be as per design & drawing approved by Engg in charge). |
| 18 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10kA, \\"C\\" curve, miniature circuit breaker suitable forinductive load of following poles in the existing MCBDB complete with connections, testing andcommissioning etc. as required. Double pole |
| 19 | S/ITC of outdoor type feeder piller,double door made out of 16 SWG sheet duly primed & painted with synthetic enamel black paint 600 mm deep having 400 amps, 04 nos insulated aluminium bus bars and to accommodate following accessories, front & back openable door, P & F of internal connection with suitable size of copper wires, following accessories & angle iron frame of 1000 mm long legs made out of 40 mm x 40 mm x 5 mm thick angle & grouting the same in suitable cement concrete foundation, arrangement for incoming & outgoing cables, cable termination, earthing, locking, interconnection etc. as required. |
| 20 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required a) 100 A,30KA,FPMCCB |
| 21 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required a) 125 A,36KA,FPMCCB |
| 22 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required a)250 A,36KA,FPMCCB |
| 23 | Providing and fixing of RRC type route marker including painting and deep marking of UG Cable size for marking of route of underground cable as required as per direction of engineern in charge |
| 24 | Supplying and laying of 100 mm GI pipe medium class for protection of underground cable for crossing the road etc as required as per direction of engineern in charge make Hidustan/Zindal/Tata Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender