Tender For Supply And Installation Works (Including Fabrication) Of Signage And Graphics For Ten Elevated Metro Stations Of Phase Ii Of Kochi Metro Rail Project
Tender Value
Ref. Documents
Estimated cost
Bid Submission
08 Sep 2026
15 days left
EMD
4.64 Lakhs
Bank guarantee accepted
Document Fee
23600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply And Installation Works (Including Fabrication) Of Signage And Graphics For Ten Elevated Metro Stations Of Phase Ii Of Kochi Metro Rail Project
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE A- Station finishing works- signages |
| 2 | Suspended sign, Illuminated, 2 sided |
| 3 | Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per relevant drawings(attached), technical specifications, signage schedule and to the satisfaction of the Architect in charge.Sign box:The sign box 100mm deep shall be fabricated out of 10mm thick Aluminium extrusion channel (100X10mm custom made extrusion) with 4 curved edges as per the drawing. The frame work is to be completed with internally blind revetting and brackets. Complete sign box is to be powder coated in RAL 9005.Illuminated surface (Pictogram & text panel):Providing and fixing of backlit sign panel on both side of sign box with 8mm thick translucent white acrylic as per specification and Vinyl shall be applied on the entire surface of this acrylic. The portion containing the pictograms shall plotter cut block out vinyl pictograms as per specification applied above the Pantone 123 vinyl and the remaining portion shall have plotter cut blockout self adhesive vinyl RAL Process Black as per specification applied on the acrylic to produce the desired bilingual text content.Illumination:Providing and fixing the LED modules for proper illumination. Please see ''Technical specification'' for LED specification. Above description generally holds good for the following signage unless otherwise specified except due modifications with special mention.Accessories:Providing and fixing all accessories such as nut-inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing.Sign fixing-Suspended:Sign box shall be fixed to the indicated surface (ceiling) using 8mm dia anchor fastners of specified make duly approved by the Architect in charge. |
| 4 | Interior Direction sign 600x400mm |
| 5 | Interior Direction sign 900x400mm |
| 6 | Interior Direction sign 1200x400mm |
| 7 | Interior Direction sign 1500x400mm |
| 8 | Fixing Suspended Signages using suspendorsProviding and fixing suspended signage using 40 mm dia NB, 3.6 mm thick MS hollow circular sections, cut, fabricated, and finished in PU paint (RAL 9005) as approved.Suspenders shall be made to required lengths after site verification to ensure proper alignment and leveling. Measurement shall be based on the total length of two suspenders per sign. Rate includes 2 nos. of 1 m long suspenders per sign. Suspenders shall be fixed to the overhead concrete beams/slabs/truss members/the MS cable tray support (steel truss member) using 6 mm thick MS plates with suitable bolting/clamping arrangements, ensuring rigid and vibration-free fixing without damaging the support system. Connections shall use M8 bolts, lock nuts, and washers as specified. Scope includes all false ceiling cutting, opening, reinstatement, and making good after installation. Also includes MS cover plate to cover the bolts for aesthetical look and perfection with 20 mm flange in 2 mm thick CRCA sheet, powder-coated in RAL 9005, as approved. Complete in all respects as per drawings and instructions of Architect-in-Charge. |
| 9 | Suspended sign, Illuminated, 2 sided, double height. |
| 10 | Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer/Architect in charge.The sign box 100mm deep shall be fabricated out of 10mm thick Aluminium extrusion channel (100X10mm custom made extrusion) with 4 curved edgs as per the drawing. The frame work is to be completed with internally blind revetting and brackets. Complete sign box is to be powder coated in RAL 9005.Illuminated surface (Pictogram & text panel):Providing and fixing of backlit sign panel on both side of sign box with 8mm thick translucent white acrylic as per specification and Vinyl shall be applied on the entire surface of this acrylic. The portion containing the pictograms shall plotter cut block out vinyl pictograms as per specification applied above the Pantone 123 vinyl and the remaining portion shall have plotter cut blockout self adhesive vinyl RAL Process Black as per specification applied on the acrylic to produce the desired bilingual text content.Illumination:Providing and fixing the LED modules for proper illumination. Please see ''Technical specification'' for LED specification. Above description generally holds good for the following signage unless otherwise specified except due modifications with special mention.Accessories:Providing and fixing all accessories such as nut-inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing.Sign fixing-Suspended:Sign box shall be fixed to the indicated surface(ceiling) using 8mm dia anchor fastners of specified make duly approved by the Architect in charge. |
| 11 | Interior Direction Sign 1500x800mm |
| 12 | Fixing Suspended Signages using suspendorsProviding and fixing suspended signage using 40 mm dia NB, 3.6 mm thick MS hollow circular sections, cut, fabricated, and finished in PU paint (RAL 9005) as approved.Suspenders shall be made to required lengths after site verification to ensure proper alignment and leveling. Measurement shall be based on the total length of two suspenders per sign. Rate includes 2 nos. of 1 m long suspenders per sign.Suspenders shall be fixed to the MS cable tray support (steel truss member) using 6 mm thick MS plates with suitable bolting/clamping arrangements, ensuring rigid and vibration-free fixing without damaging the support system. Connections shall use M8 bolts, lock nuts, and washers as specified. Scope includes all false ceiling cutting, opening, reinstatement, and making good after installation.Also includes MS cover plate with 20 mm flange in 2 mm thick CRCA sheet, powder-coated in RAL 9005, as approved.Complete in all respects as per drawings and instructions of Architect-in-Charge. |
| 13 | Face mounted sign, illuminated |
| 14 | Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer/Architect in charge.The sign box 100mm deep shall be fabricated out of 10mm thick Aluminium extrusion channel (100X10mm custom made extrusion) with 4 curved edgs as per the drawing. The frame work is to be completed with internally blind revetting and brackets. Complete sign box is to be powder coated in RAL 9005.Illuminated surface (Pictogram & text panel):Providing and fixing of backlit sign panel on both side of sign box with 8mm thick translucent white acrylic as per specification and Vinyl shall be applied on the entire surface of this acrylic. The portion containing the pictograms shall plotter cut block out vinyl pictograms as per specification applied above the Pantone 123 vinyl and the remaining portion shall have plotter cut blockout self adhesive vinyl RAL Process Black as per specification applied on the acrylic to produce the desired bilingual text content.Illumination:Providing and fixing the LED modules for proper illumination. Please see ''Technical specification'' for LED specification. Above description generally holds good for the following signage unless otherwise specified except due modifications with special mention.Accessories:Providing and fixing all accessories such as nut-inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing.Sign fixing-Suspended:Sign box shall be fixed to the indicated surface(ceiling) using 8mm dia anchor fastners of specified make duly approved by the Architect-in-Charge. |
| 15 | Interior Direction Sign 900x400mm |
| 16 | Interior Direction Sign 1200x400mm |
| 17 | Interior Direction sign 1500x400mm |
| 18 | Interior Direction sign 1800x400mm |
| 19 | Sign Fixing: Face mountedThe sign mounting frame made up of 40x40x5mm MS Equal angles as a frame back to back provided with welded angle cleats plates in 40x40x5mm MS Equal angles along the perimeter of frame with slots to receive the rivets to fix the sign frame as per drawing . Complete mounting frame including channel supports are to be PU painted to match RAL 9005 of approved make and duly approved by Architect- in-charge. |
| 20 | Projected Sign, Illuminated, 2 sided |
| 21 | Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer/Architect in charge.The sign box 100mm deep shall be fabricated out of 10mm thick Aluminium extrusion channel (100X10mm custom made extrusion) with 4 curved edgs as per the drawing. The frame work is to be completed with internally blind revetting and brackets. Complete sign box is to be powder coated in RAL 9005.Illuminated surface (Pictogram & text panel):Providing and fixing of backlit sign panel on both side of sign box with 8mm thick translucent white acrylic as per specification and Vinyl shall be applied on the entire surface of this acrylic. The portion containing the pictograms shall plotter cut block out vinyl pictograms as per specification applied above the Pantone 123 vinyl and the remaining portion shall have plotter cut blockout self adhesive vinyl RAL Process Black as per specification applied on the acrylic to produce the desired bilingual text content.Illumination:Providing and fixing the LED modules for proper illumination. Please see ''Technical specification'' for LED specification. Above description generally holds good for the following signage unless otherwise specified except due modifications with special mention.Accessories:Providing and fixing all accessories such as nut-inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing.Sign fixing-Suspended:Sign box shall be fixed to the indicated surface(ceiling) using 8mm dia anchor fastners of specified make duly approved by the Architect in charge. |
| 22 | Interior Direction Sign 1200x400mm |
| 23 | Sign Fixing: ProjectedProviding and fixing projected support for signs using 40mm dia NB 3.6mm thick MS hollow sections based on the sign length, cut and finished to required length and welded to the bracket as per design at one end and closed at the other, providing connectors for sign in 32mm dia NB 2.6mm thick MS hollow sections. including prividing 7mm Cable connecting sign box to 6mm thick wall Plate as per fabrication drawings. The entire assembly shall be finished in PU paint in colour RAL 9005 color to match as per drawing and as approved by the Architect-in-charge. Including fixing at site after due site checking and making good all the surface finsihes after the sign is installed perfectly aligned and leveled. |
| 24 | PLATFORM NUMBER SIGNAGE |
| 25 | Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer/Architect in charge.The sign box 100mm deep shall be fabricated out of 10mm thick Aluminium extrusion channel (100X10mm custom made extrusion). The frame work is to be completed with internally blind revetting and brackets. Complete sign box is to be powder coated in RAL 9005 Billingual text panel-illuminated surface.Illuminated surface (Pictogram & text panel):Providing and fixing of backlit sign panel on both side of sign box with 8mm thick translucent white acrylic as per specification and Vinyl shall be applied on the entire surface of this acrylic. The portion containing the pictograms shall plotter cut block out vinyl pictograms as per specification applied above the Pantone 123 vinyl and the remaining portion shall have plotter cut blockout self adhesive vinyl as per specification applied on the acrylic to produce the desired bilingual text content.Illumination:Providing and fixing the LED modules for proper illumination. Please see ''Technical specification'' for LED specification. Above description generally holds good for the following signage unless otherwise specified except due modifications with special mention.Accessories:Providing and fixing all accessories such as nut-inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing. |
| 26 | Platform Number signage (300x500mm) |
| 27 | Suspended Sign FixingProviding and fixing suspended signage using 40 mm dia NB, 3.6 mm thick MS hollow circular sections, cut, fabricated, and finished in PU paint (RAL 9005) as approved.Suspenders shall be made to required lengths after site verification to ensure proper alignment and leveling. Measurement shall be based on the total length of one suspenders per sign. Rate includes 1 nos. of 1 m long suspenders per sign.Suspenders shall be fixed to the overhead concrete beams/slabs/truss members/the MS cable tray support (steel truss member) using 6 mm thick MS plates with suitable bolting/clamping arrangements, ensuring rigid and vibration-free fixing without damaging the support system. Connections shall use M8 bolts, lock nuts, and washers as specified.Scope includes all false ceiling cutting, opening, reinstatement, and making good after installation.Also includes MS cover plate with 20 mm flange in 2 mm thick CRCA sheet, powder-coated in RAL 9005, as approved.Complete in all respects as per drawings and instructions of Architect-in-Charge. |
| 28 | STATION NAME SIGNAGE AT ENTRANCE |
| 29 | 3D Channel letters, Illuminated, Face mountedProviding and fixing - illuminated signs including all operations from fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Architect-in-Charge.Logo:Providing and fixing Logo mounted on Signage structure MS square box 100x100x5mm at entrance made out of 3 mm thick Aluminium sheet of required color (as specified) folded to required size and shape as per drawing and fixing to Wall. The Front facia to be made out of 8mm thick Acrylic (Milky White 040) with Transluscent Vinyl as per Pantone shade to be pased on front surface of Acrylic. Providing the LED lighting inside the 3D Logo with proper illumination and providing all the necessay Power controls, Wiring etc. All corners and hairline joints of sign face shall be finished and filled neat with white/clear silicon sealent. Cost includes all the necessary arrangement like templates, props, scaffolding, and parfect alignment and placement of the sign as specified and approved by the Engineer/Architect-in-charge.Name Panel Letters:Providing and fixing 3D Channel letter Signage structure MS square box 100x100x5mm made out of 3 mm thick Aluminium sheet of required color(as specified) folded to required size and shape as per drawing and fixing to Wall. The Front facia to be made out of 8mm thick Acrylic (Milky White 040) with Transluscent Vinyl as per Pantone shade to be pased on front surface of Acrylic. Providing the LED lighting inside the 3D Channel Letters with proper illumination and providing all the necessary power controls, wiring etc. All corners and hairline joints of sign face shall be finished and filled neat with white/clear silicon sealent. Cost includes all the necessary arrangement like templates, props, scaffolding, and perfect alignment and placement of the sign as specified and approved by the Architect-in-charge. Above description generally holds good for the following signage unless otherwise specified except due modifications with special mentionAccessories:Providing and fixing all accessories such as nut-inserts, screws , rivets, bolts, washers, nuts, etc. |
| 30 | Station Name Sign 2500X1000mmX100mm |
| 31 | Station Name Sign 3000X1000mmX100mm |
| 32 | Station Name Sign 4000X1000mmX100mm |
| 33 | Station Name Sign 10500X1000mmX100mm |
| 34 | Sign Mounting:The 3D Channel Letters and Logo should be fixed on the MS Box Structure, which is to be fixed on to the wall above entrance to the station, with expansion Bolts (Hilty) as per drawing . Complete mounting including PU painted to match the approved color & approved make and duly approved by Architect-in-Charge |
| 35 | OVERHEAD SIGNAGE |
| 36 | 3D Chanel letters, Illuminated, Face mountedProviding and fixing 3D Channel Letter station name sign on exterior walls of stations for visibility and identification from approaching roads including operations from fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-charge.Logo:Providing and fixing Logo mounted on wall, made out of 3mm acrylic with 70mm 3D project with notch type Aluminium trimcape, color (as specified) folded to required size and shape as per drawing and fixing to Wall.The Front facia to be made out of 3mm thick Acrylic(Milky White 040) with Transluscent Vinyl as per Pantone shade to be pased on front surface of Acrylic. Providing the LED lighting inside the 3D Logo with proper illumination and providing all the necessay power controls, wiring etc.All corners and hairline joints of sign face shall be finished and filled neat wigh white/clear silicon sealent.Cost includes all the necessary arrangement like templates, props, scaffolding, and parfect alignment and placement of the sign as specified and approved by the Engineer/Architect-in-charge.Name panel letters: Providing and fixing 3D Channel letter mounted on wall, made out of 3mm acrylic with 70mm 3D project with notch type Aluminium trimcape, color (as specified) folded to required size and shape as per drawing and fixing to Wall. The Front facia to be made out of 3mm thick Acrylic (Milky White 040) with Transluscent Vinyl as per Pantone shade to be pased on front surface of Acrylic. Providing the LED lighting insice the 3D Channel Letters with proper illumination, and providing all the necessay power controls, wiring etc. All corners and hairline joints of sign face shall be finished and filled neat wigh white/clear silicon sealent. Cost includes all the necessary arrangement like templates, props, scaffolding, and parfect alignment and placement of the sign as specified and approved by the Engineer/Architect-in-charge.Above description generally holds good for the following signage unless otherwise specified except due modifications with special mention. Accessories:Providing and fixing all accessories such as nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing. |
| 37 | Overhead Station Signage - 7500 x 1160 mm |
| 38 | Overhead Station Signage - 10600 x 1160 mm |
| 39 | Sign Mounting: Face:The 3D Channel Letters and logo should be directly fixed to ACP with expansion Bolts (Hilty) as per drawing. Complete mounting including PU painted to match the approved colour & approved make and duly approved by Architect-in-Charge. |
| 40 | EXTERNAL POST SIGNAGES |
| 41 | Post mounted sign (picto), Non-Illuminated, 2-sided, double heightProviding and fixing Non-illuminated Location signs as Pictograms in exterior areas of stations including all operations from fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer/Architect-in- charge.Sign Box:The sign box 100mm deep shall be fabricated out 5mm thick aluminium sheet. The frame work is to be completed with internally blind revetting and brackets. Complete sign box is to be powder coated in RAL 9005 as per approved sample. 5mm thk aluminium sheet is bent and fixed to the box frame with angles and printed opaque vinyl as per specification is applied on the surface. Refer drawing for details.Sign panel - 2 sided & non-Illuminated:5mm thk aluminium sheet is bent and fixed to the box frame with angles and printed opaque vinyl as per specification is applied on the surface. Refer drawing for details.Above description generally holds good for the following signage unless otherwise specified except due modifications with special mention.Accessories:Providing and fixing all accessories such as nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing. |
| 42 | Taxi Drop-off + Wheelchair drop-off sign, Parking Direction Sign - 325x600 mm - Double height |
| 43 | Sign Mounting - Post:Providing a Sign post of 60mm dia MS hollow sections including welded base plate in 8mm thick MS Plate as per drawing with Concrete footing. The entire post assembly shall be painted in PU paint to match colour RAL 9005 as specified and approved by the Engineer/Architect-in-charge. The Post shall be always be a single continuous element without any joints.Cost to include all activities and temporary props used for a perfect vertical in plumb installation, shim Plates for adjustment of levels and filling the gap with concrete slury etc required for fixing the sign in an external location. Foundation and Pedestal:Providing and laying foundation for the sign in PCC (concrete M20) including its compaction and all activities like Excavation, PCC base layer, Casting of holding down HTS anchor J bolts of 16mm dia using a sized template in MS 8mm thick for locating and accurate spacing of bolts as per drawing. 2mm thk SS clamps bolted and set into 3mm thk groove made 150mm from top and 200mm from bottom of the pedestal to keep it intact and flushed to face. The item cost includes cutting and opening the floor finish at location, and making good the location to the match the original finish after fixing and installation of sign. |
| 44 | EXTERNAL POST SIGNAGES |
| 45 | Post mounted sign (picto), Non-Illuminated, 2-sidedProviding and fixing Non-illuminated Location signs as Pictograms in exterior areas of stations including all operations from fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer/Architect-in- charge.Sign Box:The sign box 100mm deep shall be fabricated out 5mm thick aluminium sheet. The frame work is to be completed with internally blind revetting and brackets. Complete sign box is to be powder coated in RAL 9005 as per approved sample. 5mm thk aluminium sheet is bent and fixed to the box frame with angles and printed opaque vinyl as per specification is applied on the surface. Refer drawing for details.Sign panel - 2 sided & non-Illuminated:5mm thk aluminium sheet is bent and fixed to the box frame with angles and printed opaque vinyl as per specification is applied on the surface. Refer drawing for details.Above description generally holds good for the following signage unless otherwise specified except due modifications with special mention.Accessories:Providing and fixing all accessories such as nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing. |
| 46 | Ramp sign - 325x325 mm |
| 47 | Sign Mounting - Post:Providing a Sign post of 60mm dia MS hollow sections including welded base plate in 8mm thick MS Plate as per drawing with Concrete footing. The entire post assembly shall be painted in PU paint to match colour RAL 9005 as specified and approved by the Engineer/Architect-in-charge. The Post shall be always be a single continuous element without any joints.Cost to include all activities and temporary props used for a perfect vertical in plumb installation, shim Plates for adjustment of levels and filling the gap with concrete slury etc required for fixing the sign in an external location.Foundation and Pedestal:Providing and laying foundation for the sign in PCC (concrete M20) including its compaction and all activities like Excavation, PCC base layer, Casting of holding down HTS anchor J bolts of 16mm dia using a sized template in MS 8mm thick for locating and accurate spacing of bolts as per drawing. 2mm thk SS clamps bolted and set into 3mm thk groove made 150mm from top and 200mm from bottom of the pedestal to keep it intact and flushed to face. The item cost includes cutting and opening the floor finish at location, and making good the location to the match the original finish after fixing and installation of sign. |
| 48 | TOTEM SIGNAGE FOR STATION IDENTIFICATION |
| 49 | Sign, Illuminated, 2 sided Post mountedProviding and fixing illuminated and 2 sided totem inluding all operations from fabrication to installation all complete as per relevant drawings, technical sprecifications, signage schedule and to the satisfaction of the Engineer/Architect-in-charge.Sign Box:The sign box 250mm deep shall be fabricated out of 10mm thick Aluminium extrusion channel (100X10mm custom made extrusion) with 4 curved edgs as per the drawing along with 2mm aluminium sheet laser cut for Logo. The frame work is to be completed with internally blind revetting and brackets. Complete sign box is to be powder coated in RAL 9005. Sign Panel:4mm thick Clear Acrylic pasted with Printable Vinyl with artwork as required.Illumination: Providing and fixing the LED strips for proper illumination. Please see \\"Technical Specification\\" for LED Specification. |
| 50 | Station Identification Sign 3000 X 1250 mm |
| 51 | Sign Mounting:Fixing the Entire Totem Sign on Floor, with 5mm thick MS plate into Concrete. The entire post assembly shall be painted in PU paint to match colour RAL 9005 as specified and approved by the Engineer/Architect-in-charge.Foundation and Pedestal:Providing and laying foundation for the Totem sign in PCC (concrete M20) including its compaction and all activities like Excavation, PCC base layer, Casting of holding down HTS anchor J bolts of 16mm dia using a sized template in MS 8mm thick for locating and accurate spacing of bolts as per drawing. The item cost includes cutting and opening the floor finish at location, and making good the location to the match the original finish after fixing and installation of sign. |
| 52 | STATION NAME AT PLATFORM |
| 53 | Post mounted sign, Non-Illuminated, 1-sidedProviding and fixing Non-illuminated Location signs in the station platform areas including all operations from fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer/Architect-in-charge. Sign Box:The sign box 75mm deep shall be made out of 2 mm thick Aluminium sheet fabricated and provided with same material support channel spot welded (5mm dia) every 40mm c/c and 'Z' shape ties made in 2mm thick MS sheet CO2 welded to sign channel. All fabrication shall be done using CNC machines as per drawings. The box shall made with least welding by making a continuous folded channel and bent at corners to achieve a true right angled sign box. The entire box including channel supports are to be powder coated to match RAL CLASSIC 7016 colour duly approved by Engineer/Architect-in-charge. Sign box flange receiving the sign face shall be provided with nut inserts to receive the screws to fix the sign frame.Sign panel- 1 face:Providing and fixing sign panels on both side of sign box made out of 2mm thick Aluminium sheet frame fabricated to required size and shape, the frame to be welded on 2 bottom corners making a 'L' and top part of frame fixed at site after inserting the sign face, complete frame shall be powder coated on all faces to match RAL CLASSIC 7016. Sign face shall be made in 2mm thick aluminium sheet powder coated in White (RAL 9016) (as specified) having graphics pasted in Plotter cut Blockout vinyl pasted over a transluscent white vinyl and entire panel covered with a protective overlaminate. The Plotter cut blockout vinyl to match the specified colour (colour Pantone7463 and Pantone 306C) and of specified make duly approved by the Engineer/Architect-in-charge. The 'L' frame to be made out of single sheets in continuous length without any joints and fixed to sign using Blind rivets as specified and approved by Engineer/Architect-in-charge.The top member of frame shall be fixed using cross headed M4 screws to allow opening the frame for servicing. Powder coating shall be done on all internal as well as external surfaces.Back Panel: Providing and fixing Back panel on the inside of sign box made out of 2mm thick Aluminium sheet frame fabricated to required size and shape, shall be powder coated on all faces to match RAL CLASSIC 7016 color. The back panel shall be fixed to the sign using blind rivets as specified. Powder coating shall be done on all internal as well as external surfaces.Above description generally holds good for the following signage unless otherwise specified except due modifications with special mention Accessories: Providing and fixing all accessories such as nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing. |
| 54 | Station Name (1500x450) + Horizontal Line map (1500x500) |
| 55 | Station Name (1500x450) + Fire evacuation map (1500x900) |
| 56 | Sign Mounting:Providing, fabricating, supplying, and fixing sign mounting posts using 80mm dia NB MS hollow circular sections of 5mm thickness, of required height, comprising base plate in 8mm thick MS plate and gusset plates in 6mm thick MS, including 6mm thick MS cap plate at top, complete as per approved drawings; including necessary provisions for welding connection with sign boxes, with portions kept unpainted where required; the entire assembly finished with anti-corrosion primer and PU paint in RAL 9005 (Black); posts to be single continuous members without joints; including all activities such as alignment, plumbing, temporary supports, shims/packing plates; further including providing and fixing of 16mm dia HTS anchor (J) bolts using 8mm thick MS template for accurate positioning, and cutting, removing, and reinstating existing floor finish to match original condition, complete as per drawings and directions of the Architect-in-charge. |
| 57 | ROOM NAMES SIGNS |
| 58 | Non-illuminated, 1 sided - Face mountedProviding and fixing Non-illuminated room name signages in interiors of stations from procuring, fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer/Architect-in-charge.Sign frame:Providing and fixing plate signs made in 2mm Aluminium Sheet/ ACP neatly trimmed and corners rounded and dressed with holes punched/drilled as per size given in drawing. Complete plate on both faces to be powdercoated in RAL 9005 as specified and duly approved by Engineer/Architect-in-charge, edge to edge graphics to be pasted on the plate printed over self adhesive vinyl as per artwork and complete plate covered with an protective overlaminate as specified and duly approved by Engineer/Architect-in-charge. Cost to include fixing of sign at location on to plastered surface/concrete/granite cladding/metal door etc. including all marking, alignment, drilling, plugs, hexagonal head stainless steel screws and 3mm thick EPDM Rubber spacers, 3M tape, silicone etc complete as specified in drawings and at locations approved by the Architect-in-charge |
| 59 | Room Names 450 x 150mm |
| 60 | LINE MAP |
| 61 | Face mounted sign, non-illuminatedProviding, fabricating, supplying, and fixing non-illuminated vertical panel signage (wall/structure mounted) comprising 2mm thick aluminium sheet panel formed as a tray with 25–30mm return and rounded corners, finished with powder coating in RAL 9005 (Black) to form the border/frame, and front face applied with high-quality printed self-adhesive vinyl as per approved graphics including protective anti-graffiti overlaminate; the panel to be mounted on wall / cladding / structural surface using concealed MS sub-frame in 25x25x3mm equal angles or suitable spacers, including SS counter-sunk screws, nylon plugs, 8mm thick EPDM rubber spacers, and all necessary fasteners, complete with marking, alignment, drilling, and fixing to achieve proper verticality and finish; including all accessories such as nut-inserts, screws, rivets, bolts, washers, brackets, etc., and making good the surface after installation, all as per approved drawings and directions of the Architect-in-charge. |
| 62 | 500 x 1500 mm - Line map (Single) |
| 63 | 1000 x 1500 mm - Line map (Double) |
| 64 | Sign Mounting: Face -The sign mounting frame made up of 40x40x5mm MS Equal angles as a frame back to back provided with welded angle cleats plates in 40x40x5mm MS Equal angles along the perimeter of frame with slots to receive the rivets to fix the sign frame as per drawing . Complete mounting frame including channel supports are to be PU painted to match GreyG2 of approved make and duly approved by Architect- in-charge. |
| 65 | POST MOUNTED MAPS |
| 66 | Post Mounted Sign (Single), 1 sided, Non-Illuminated |
| 67 | Providing and fixing non-illuminated Post mounted sign in the interior areas of stations with the KMRL Area map/ Syatem map including all operations from fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer/Architect-in-charge.Sign Frame:Providing and fixing at location poster panel made in readily available hinged clickable secure aluminium extrusions (max 30mm wide on face and capable of holding a sandwhich graphic with total thickness of max 8mm) made into a frame with miter joint and assembled with corner pieces, entire frame mounted on same size 2mm thick aluminium sheet powder coated in White, mounted with fabricated angle cleats 25x25x3 of MS CRCA sheet to mount on the mounting frame. The Aluminium sections shall be powdercoated in colour to match Grey and and approved by the Engineer/Architect-in-charge base on a presented sample of the signGraphics:Providing and fixing, matt laminated printed graphic cut to size and mounted on 3mm PVC foam sheet inside the frame covered and protected with a cut to size 4.5mm thick Clear polycarbonate sheet. The graphic shall be printed using original artworks and all colours in graphcis shall be duly approved by the Engineer/Architect-in-charge based on a sample print. |
| 68 | Area map/system map - 1250 x 900 mm (2 legged post) |
| 69 | Fire map - 1250 x 900 mm (2 legged post) |
| 70 | Sign Mounting:Providing a Sign post of 80mm dia NB 5.4mm thick MS hollow sections including welded Base plate in 8mm thick MS Plate and Gussets in 6mm thick MS Plate as per drawing with holes to fix it on holding down bolts anchored in concrete footing. The post shall closed with a 6 mm thick MS plate and parts kept unpainted to weld the sign structure as per the drawing to ensure a rigid connection at site. The entire post assembly shall be painted in PU paint to match colour Grey as specified and approved by the Engineer/Architect-in-charge. The Post shall be always be a single continuous element without any joints.Cost to include all activities and temporary props used for a perfect vertical in plumb installation, shim Plates for adjustment of levels and filling the gap with concrete slury etc required for fixing the sign at the location. |
| 71 | Post Mounted Sign (Double), 1 sided, Non-Illuminated |
| 72 | Providing and fixing non-illuminated Post mounted sign in the interior areas of stations with the KMRL Area map/ Syatem map including all operations from fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer/Architect-in-charge.Sign Frame:Providing and fixing at location poster panel made in readily available hinged clickable secure aluminium extrusions (max 30mm wide on face and capable of holding a sandwhich graphic with total thickness of max 8mm) made into a frame with miter joint and assembled with corner pieces, entire frame mounted on same size 2mm thick aluminium sheet powder coated in White, mounted with fabricated angle cleats 25x25x3 of MS CRCA sheet to mount on the mounting frame. The Aluminium sections shall be powdercoated in colour to match Grey and and approved by the Engineer/Architect-in-charge base on a presented sample of the signGraphics:Providing and fixing, matt laminated printed graphic cut to size and mounted on 3mm PVC foam sheet inside the frame covered and protected with a cut to size 4.5mm thick Clear polycarbonate sheet. The graphic shall be printed using original artworks and all colours in graphcis shall be duly approved by the Engineer/Architect-in-charge based on a sample print. |
| 73 | Area map + System map - 2500 x 900 mm (3 legged post) |
| 74 | Sign Mounting:Providing a Sign post of 80mm dia NB 5.4mm thick MS hollow sections including welded Base plate in 8mm thick MS Plate and Gussets in 6mm thick MS Plate as per drawing with holes to fix it on holding down bolts anchored in concrete footing. The post shall closed with a 6 mm thick MS plate and parts kept unpainted to weld the sign structure as per the drawing to ensure a rigid connection at site. The entire post assembly shall be painted in PU paint to match colour Grey as specified and approved by the Engineer/Architect-in-charge. The Post shall be always be a single continuous element without any joints.Cost to include all activities and temporary props used for a perfect vertical in plumb installation, shim Plates for adjustment of levels and filling the gap with concrete slury etc required for fixing the sign at the location. |
| 75 | POST MOUNTED LINE MAPS |
| 76 | Post mounted sign, non-illuminatedProviding, fabricating, supplying, and fixing non-illuminated vertical panel signage (wall/structure mounted) comprising 2mm thick aluminium sheet panel formed as a tray with 25–30mm return and rounded corners, finished with powder coating in RAL 9005 (Black) to form the border/frame, and front face applied with high-quality printed self-adhesive vinyl as per approved graphics including protective anti-graffiti overlaminate; the panel to be mounted on wall / cladding / structural surface using concealed MS sub-frame in 25x25x3mm equal angles or suitable spacers, including SS counter-sunk screws, nylon plugs, 8mm thick EPDM rubber spacers, and all necessary fasteners, complete with marking, alignment, drilling, and fixing to achieve proper verticality and finish; including all accessories such as nut-inserts, screws, rivets, bolts, washers, brackets, etc., and making good the surface after installation, all as per approved drawings and directions of the Architect-in-charge. |
| 77 | Post Mounted 1000 x 1500mm (Line map - double) |
| 78 | Sign Mounting:Providing a Sign post of 60mm dia NB 5.4mm thick MS hollow sections including welded Base plate in 8mm thick MS Plate and Gussets in 6mm thick MS Plate as per drawing with holes to fix it on holding down bolts anchored in concrete footing. The post shall closed with a 6 mm thick MS plate and parts kept unpainted to weld the sign structure as per the drawing to ensure a rigid connection at site. The entire post assembly shall be painted in PU paint to match colour RAL 9005 as specified and approved by the Engineer/Architect-in-charge. The Post shall be always be a single continuous element without any joints. Cost to include all activities and temporary props used for a perfect vertical in plumb installation, shim plates for adjustment of levels and filling the gap with concrete slury etc required for fixing the sign at the location. |
| 79 | EMERGENCY EXIT SIGNAGES |
| 80 | Suspended sign, Illuminated, 2 sided, single height KMRL-SIGN-18 |
| 81 | Providing and fixing brought out illuminated signs including all operations from fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the engineer/architect in charge. The artwork to be fixed on toughened glass of 6mm thickness part name display.Sign Box:The sign box 100mm deep shall be fabricated out of 10mm thick Aluminium extrusion channel (100X10mm custom made extrusion) with 4 curved edgs as per the drawing. The frame work is to be completed with internally blind revetting and brackets. Complete sign box is to be powder coated in RAL 9005.Sign panel - 2 side illuminated face:Providing and fixing sign panel on both side of sign box made out of 6mm thick toughened glass. The glass sign panel should be fixed on the sign box with appropriate adhesive. Printed vinyl of artwork as per the approved design shall be pasted on the glass on both sides.Illumination:Providing and fixing the LED strips for proper illumination. For the details of LED, please refer 'technical specification'.Above description generally holds good for the following signages unless otherwise specified except due modifications with special mention. Accessories:Providing and fixing all accessories such as nut inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing. Sign box shall be fixed to the indicated surface(ceiling) duly approved by the Architect in charge.. |
| 82 | (Way to Emergency Exit, Manual call point, Fire hose cabinet) - 600 x 400 mm |
| 83 | (ETS,ESP) 1200 x 400 mm |
| 84 | Sign Fixing: Suspended-Providing and fixing suspended signage using 40 mm dia NB, 3.6 mm thick MS hollow circular sections, cut, fabricated, and finished in PU paint (RAL 9005) as approved.Suspenders shall be made to required lengths after site verification to ensure proper alignment and leveling. Measurement shall be based on the total length of two suspenders per sign. Rate includes 2 nos. of 1 m long suspenders per sign.Suspenders shall be fixed to the overhead concrete beams/slabs/truss members/the MS cable tray support (steel truss member) using 6 mm thick MS plates with suitable bolting/clamping arrangements, ensuring rigid and vibration-free fixing without damaging the support system. Connections shall use M8 bolts, lock nuts, and washers as specified.Scope includes all false ceiling cutting, opening, reinstatement, and making good after installation.Also includes MS cover plate with 20 mm flange in 2 mm thick CRCA sheet, powder-coated in RAL 9005, as approved.Complete in all respects as per drawings and instructions of Architect in charge. |
| 85 | Face mounted sign, illuminated, 1 sided |
| 86 | Providing and fixing brought out illuminated signs including all operations from fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the engineer/architect in charge. The artwork to be fixed on toughened glass of 6mm thickness part name display.Sign Box:The sign box 100mm deep shall be fabricated out of 10mm thick Aluminium extrusion channel (100X10mm custom made extrusion) with 4 curved edgs as per the drawing. The frame work is to be completed with internally blind revetting and brackets. Complete sign box is to be powder coated in RAL 9005.Sign panel - 1 side illuminated face:Providing and fixing sign panel on both side of sign box made out of 6mm thick toughened glass. The glass sign panel should be fixed on the sign box with appropriate adhesive. Printed vinyl of artwork as per the approved design shall be pasted on the glass on both sides.Illumination:Providing and fixing the LED strips for proper illumination. For the details of LED, please refer 'technical specification'.Above description generally holds good for the following signages unless otherwise specified except due modifications with special mention. Accessories:Providing and fixing all accessories such as nut inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing. Sign box shall be fixed to the indicated surface(ceiling) duly approved by the architect in charge. |
| 87 | (Way to emergency exit, Fire hose cabinet) - 600 x 400 mm |
| 88 | Sign Mounting : FaceThe sign mounting frame made up of 40x40x5mm MS Equal angles as a frame back to back provided with welded angle cleats plates in 40x40x5mm MS Equal angles along the perimeter of frame with slots to receive the rivets to fix the sign frame as per drawing . Complete mounting frame including channel supports are to be PU painted to match Pantone 9005 of approved make and duly approved by Architect- in-charge |
| 89 | Projected sign, illuminated, 2 sided |
| 90 | Providing and fixing brought out illuminated signs including all operations from fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the engineer/architect in charge. The artwork to be fixed on toughened glass of 6mm thickness part name display.Sign Box:The sign box 100mm deep shall be fabricated out of 10mm thick Aluminium extrusion channel (100X10mm custom made extrusion) with 4 curved edgs as per the drawing. The frame work is to be completed with internally blind revetting and brackets. Complete sign box is to be powder coated in RAL 9005.Sign panel - 2 side illuminated face:Providing and fixing sign panel on both side of sign box made out of 6mm thick toughened glass. The glass sign panel should be fixed on the sign box with appropriate adhesive. Printed vinyl of artwork as per the approved design shall be pasted on the glass on both sides.Illumination:Providing and fixing the LED strips for proper illumination. For the details of LED, please refer 'technical specification'.Above description generally holds good for the following signages unless otherwise specified except due modifications with special mention. Accessories:Providing and fixing all accessories such as nut inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing. Sign box shall be fixed to the indicated surface(ceiling) duly approved by the architect in charge. |
| 91 | (Way to Emergency Exit, Manual call point, Fire hose cabinet) - 600 x 400 mm |
| 92 | Projected Sign fixing:Providing and fixing projected support for signs using 40mm dia NB 3.6mm thick MS hollow sections based on the sign length, cut and finished to required length and welded to the bracket as per design at one end and closed at the other, providing connectors for sign in 32mm dia NB 2.6mm thick MS hollow sections. including prividing 7mm Cable connecting sign box to 6mm thick wall Plate as per fabrication drawings. The entire assembly shall be finished in PU paint in colour RAL 9005 color to match as per drawing and as approved by the Architect-in-charge. Including fixing at site after due site checking and making good all the surface finsihes after the sign is installed perfectly aligned and leveled. |
| 93 | INFORMATION TRAY BOARD SIGNAGES |
| 94 | Face mounted frame sign, non-illuminated |
| 95 | Providing, fabricating, supplying, and fixing non-illuminated vertical panel signage (wall/structure mounted) comprising 2mm thick aluminium sheet panel formed as a tray with 25–30mm return and rounded corners, finished with powder coating in RAL 9005 (Black) to form the border/frame, and front face applied with high-quality printed self-adhesive vinyl as per approved graphics including protective anti-graffiti overlaminate; the panel to be mounted on wall / cladding / structural surface using concealed MS sub-frame in 25x25x3mm equal angles or suitable spacers, including SS counter-sunk screws, nylon plugs, 8mm thick EPDM rubber spacers, and all necessary fasteners, complete with marking, alignment, drilling, and fixing to achieve proper verticality and finish; including all accessories such as nut-inserts, screws, rivets, bolts, washers, brackets, etc., and making good the surface after installation, all as per approved drawings and directions of the Architect-in-charge. |
| 96 | Frame sign 300 x 600 mm (ETS Information Board) |
| 97 | Frame sign 450 x 300 mm (Entry prohibited & Danger) |
| 98 | Frame sign 300 x 450 mm (ESP & Phone Information Board) |
| 99 | Frame sign 450 x 1072 mm (Safety message + warning) |
| 100 | Frame sign 450 x 915 mm (Warning - blue, Do's & don'ts) |
| 101 | Frame sign 450 x 375 mm (Safety message) |
| 102 | Frame sign 900 x 915 mm (Offences) |
| 103 | Frame sign 900 x 1072 mm (Prohibited items) |
| 104 | Sign Mounting: Face :The sign mounting frame made up of 40x40x5mm MS Equal angles as a frame back to back provided with welded angle cleats plates in 40x40x5mm MS Equal angles along the perimeter of frame with slots to receive the rivets to fix the sign frame as per drawing . Complete mounting frame including channel supports are to be PU painted to match RAL 9005 of approved make and duly approved by Architect- in-charge. |
| 105 | VINYL SIGNAGES |
| 106 | Print on Self Adhesive Film, Face mounted |
| 107 | Providing and fixing non-illuminated signs including all operations from printing to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Architect-in-charge.Graphics:Providing and fixing graphics directly pasted on required surfaces printed over self adhesive vinyl as per artwork and completed and laminated with protective overlaminate as specified and duly approved by Engineer-in-charge. Cost to include fixing of sign at surface inlucing its cleaning, marking, alignment, complete as spedified in drawings and at locations approved by the Architect-in-charge |
| 108 | Printed Vinyl signage |
| 109 | Print on Self Adhesive Frosted Film, Face mounted |
| 110 | Providing and fixing non-illuminated signs including all operations from printing to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer/Architect-in-charge.Graphics:Providing and Pasting Digitally printed signs on transparent self adhesive vinyl directly pasted the backside of glass surfaces (seen from Customer end), and applying frosted film on top of that , and duly approved by Engineer/Architect-in-charge. Cost to include fixing of sign at location on to back surface of glass inlucing its cleaning. marking, alignment, complete as spedified in artwork drawings and at locations approved by the Architect-in-charge |
| 111 | Printed clear Vinyl signage |
| 112 | FLOOR VINYL - Print on Self Adhesive Floor Vinyl |
| 113 | Providing and fixing non-illuminated signs including all operations from printing to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer/Architect-in-charge.Graphics:Providing and fixing graphics directly pasted on the floor surfaces, printed over self adhesive vinyl, as per artwork and completed as specified and duly approved by Engineer-in-charge. Cost to include fixing of sign at location on to floor surface inlucding matt finished laminate & its cleaning, marking, alignment, complete as specified in drawings and at locations approved by the Architect-in-charge. |
| 114 | Floor Vinyl |
| 115 | TEXTURED SURFACE NON PVC BASED WALL GRAPHIC FINISHES |
| 116 | Providing and fixing Graphic films of high quality non-PVC film of thickness not more than 60 Microns. The Adhesive of the film should be a Grey colored pigmented adhesive and it shall stick, without the use of an activator such as solvents or heat. The adhesive of the film should be a pressure activated adhesive providing repositionability and has non-visible air release channels to provide a bubble free application The film should be certified as Green Guard Gold by the Underwriters laboratory. The liner of the Film should be a high-quality paper liner which has a polyethylene coating on both sides to provide excellent lay flatness while converting. The Graphic film should not contain any Heavy metals in its construction and should be compliant with the limits of RoHS Directive 2002/95/EC and its Subsequent amendments. The Film should not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. The film should have fire retardant properties and should have a category of 1 A when tested as per ASTM E 84 standard of flammability testing. The Film should be compliant with EN 13501 for Flame retardancy and should have a minimum Category of “B” under Fire behavior , “ S” under smoke and “D0” for burning. The name of the manufacturer / brand should be clearly displayed on the liner. The film should be printed using a recommended printing platform, applied with a suitable overlaminate film for protection and then installed. The surface preparation and the application should be done using manufacturers recommended procedures and the warranty should be provided by manufacturer directly. Printing on face material must be done with Latex Wide Format Digital Printer with GREENGUARD / GREENGUARD GOLD Certified Inks or UV Wide Format Digital Printer with GREENGUARD / GREENGUARD GOLD Certified Inks only. Ink Layer should not peel, crack from base substrate used in the intended print application.The entire print construction must be protected with compatible high-quality non-PVC matte overlaminate which is also phthalate and halogen free for use in indoor and outdoor applications. Use of over-laminate is mandatory to protect the print from fading with high conformability to take shape of textured surface of wall. The thickness of the over lamination film should be min 0.05 mm without adhesive. The over lamination film should also comply with the ASTM E 84 standard and meet requirement of Class I (A) and smoke developed rating of less than or equal to 450. Overlaminate should have good chemical resistance property and should resists mild alkalis, mild acids, and salt. It should show excellent resistance to water (does not include immersion) and should resists occasional fuel spills. The edge sealing material should be clear acrylic / alkyd / PU resin or an approved clear tape that will be applied on all the overlap joints of the film and the ends / edges of the film with at least 4 mm footprint covering 2 mm on both the exposed edges. |
| 117 | ARCHITECTURAL SURFACE FINISHES WITH PRINTED PATTERNS |
| 118 | Providing and fixing high-quality architectural finish should be used for interior surface decoration, having multilayered construction with a pressure sensitive adhesive and air release channel for bubble free and faster application. The architectural finish solution should be easy to clean, should have good chemical and stain resistance properties. The self-adhesive film should be pre-patterned where base film, printing and overlaminate are fused with each other in multilayer construction, to ensure maximum repeatability in design. The surface of the film should be embossed that provides enriched feel effect with corresponding natural finish. The patterns and finishes of these films should closely resemble to natural substrates to ensure improve aesthetics. The film should be easy to clean using detergent (between pH 5 and 8) diluted in water. The film should have ability to withstand impacts and resist scratches to have better durability. The film should be flexible to facilitate easy application. The film should be applied using pressure with appropriate tools without the use of any glue or fluid. Use of primer for surface preparation and increase in adhesion will be permitted. The thickness of these Architectural finishes should be 200 - 220 microns and it should be resistant to common household staining agents. The film should be RoHS compliant & Phthalate free. It should be Class A/B rated (Most Products have Class A) in terms of fire retardancy properties, when used in Interior Applications as defined by NFPA 101 “Life Safety Code”, Test Method ASTM E84. The film should be compliant as low emitting per CA Specification 01350, tested per CDPH Standard Method V1.1-2010. The film should have ability to withstand impacts and resist scratches for better durability. The durability of the product should range between 5-10 years based on different categories for vertical application.UV digital printing shall be carried out on the film to achieve highresolution graphics with consistent colour reproduction and resistance to fading under indoor lighting conditions. |
| 119 | SUSPENDER VARIATION |
| 120 | Variation Length for suspendors of signage which will be measured indiviadually. |
| 121 | PHOTOLUMINESCENT SIGNAGE |
| 122 | Providing and fixing Sign board made of 3mm thick photoluminescent PVC/Acrylic/ACP board with printer test in white with green background of size 300mm x 100 mm each |
| 123 | FARE CHART - Face mounted, Non-Illuminated |
| 124 | Providing and fixing of 5 mm Forex board of required size with printed vinyl pasted on it. Graphics:Providing and fixing graphics directly pasted on the foam/ forex board, printed over self adhesive vinyl as per artwork and completed and laminated with protective overlamite as specified and duly approved by Engineer/Architect-in-charge.Cost to include fixing of sign at location on to wall surface inlucing its cleaning, marking, alignment, complete as specified in drawings and at locations approved by the Architect-in- charge. |
| 125 | Fare Chart |
| 126 | HORIZONTAL LINE MAP - Face mounted, Illuminated |
| 127 | Providing, fabricating, supplying, and fixing illuminated signage, mounted horizontally on pier arm / cable tray support / truss, comprising 70mm thick aluminium powder coated frame with rounded corners, and UV printed Star Flex (3-layer) as per approved graphics; complete with LED modules / rigid bars for uniform backlighting and rainproof 600W SMPS, including all internal wiring, mounting brackets, clamps, and SS fasteners, installation at height, electrical connections, testing, and commissioning, complete as per approved drawings and directions of the Architect-in-charge. |
| 128 | Horizontal line map of Size 10m x 1m |
| 129 | ARTWORKS |
| 130 | Providing and executing wall artwork/painting using acrylic / water-based paints on designated surfaces, including design and content development by the contractor based on the themes for each metro station, surface preparation (cleaning, putty, priming), and application of artwork in approved colours and patterns; artwork style to match the station theme and as approved by the Architect-in-charge; including all materials, labour, tools, scaffolding, transportation, protective coatings, and making good after completion, complete in all respects. |
| 131 | CLADDING OF FACADES AND WALLS |
| 132 | Providing and fixing aluminium framework for cladding works at all heights, using extruded built-up standard tubular sections of approved make conforming to IS: 733 and IS: 1285. The framework shall be fixed to existing masonry or RCC structures as horizontal and vertical members using rawl plugs and stainless steel screws or suitable fixing clips. Aluminium sections shall be smooth, straight, rust-free, and properly mitred and mechanically jointed wherever required, including cleat angles and brass/stainless steel screws, complete in all respects as per architectural drawings and directions of the Architect-in-charge. Approved make: Hindalco or equivalent. |
| 133 | Aluminium Framework: : Aluminium frame to be fabricated using tubular sections of size 25 x 50 x 2 mm, supported with cleat angles of size 35 x 35 x 3 mm and support angles of size 75 x 50 x 6 mm, complete as per drawings and specifications.Rate includes all accessories for fixing. |
| 134 | Multiwood Cladding :Supply and fixing of 12 mm thick Multiwood cladding on walls over the aluminium framework already in position, including putty filling at joints of Multiwood boards. The rate shall include the cost of all materials, labour, transportation, unloading, fasteners, tools and tackles, lead, lift, and all incidental and overhead expenses, complete in all respects as per drawings and specifications. |
| 135 | Lift Architrave: Providing, fabrication and fixing wooden architrave at Lift entrance door as with 1 mm thick Mernino make laminate panels lined on top of 12mm thick BWP ply with necessary hardwares, ply shall be fixed to a frame work consisting of 25mm x 50mm x 1.5 mm aluminium tube section at 600 c/c or as required. The cost to be includes all materials, labour,wastages, lead, lifts, necessary staging/scaffolding. cutting, necessary hardware, protections, tools and machinery, all other related works, all complete as per drawings, specifications and to the approval of the Architect in charge. |
| 136 | Aluminum Composite panels : Providing and fixing ACP in all colours of approved brand for wall cladding at all heights and elevations including necessary aluminum composite panel consist of 3mm thermoplastic core of anti oxidant LDPE sandwiched between two skin of 0.5 mm thick alloy sheet making a total sheet thickness of 4 mm. The surface shall be finished with PVDF base coating on the top side and service coating on the reverse side shall be with a polymer paint. Coating shall confirm to ECCA of AAMA. The system shall design to withstand wind pressure of 200 Kg/Sqm and shall be fixed to the masonry/RCC walls with necessary clamps, bracket and anchor fasteners. All Clamps and brackets shall be hot dip galvanized minimum 80 micron thick and confirmed to IS : 4759 - 1996. The extruded aluminum sections shall be anodized in approved colour with anodic coating minimum 20 microns. Extruded section shall be of 6063 T5 or T6 alloy confirming to ASTM B 221. (items include cost of aluminum frame, ACP Panels, Cramps 110mm size, weather sealant, gasket, foam, fixtures, scaffolding, all machineries and any other fastening strips, nuts, bolts, rivets, washers, etc. complete).Item shall include to provide EPDM gaskets ( by approved manufacturer), open cell polyethylene backer rods, weather sealant etc. The weather sealant shall be Dow Corning 991 or equivalent and the width of the gap filled with sealant shall be as specified. The rate inclusive cost for profiling and designing as per detail design drawing. This includes any doors in the ACP cladding for accessing the service ducts with its accessories and locking system. |
| 137 | SCHEDULE B- LED SIGNAGE |
| 138 | Supply and installation of 55 inch LED Commercial Display Panel (Smart Signage) having the following specifications. Screen Size: 55 inch, , LED Backlit-VA, Resolution : UHD(4K) , Connectivity : HDMI(2.0) x2nos, USB port x2nos, Control ports : LAN RJ- 45 -1no, RS232C(in/out) thru stero jack, Built in Wi Fi, Built in speaker : 20 W, Built in storage 16GB or more, working hours : 24 x 7, including wall mounting kit and handing kit, additional pipes for hanging from wall and ceiling included in the rate and no extra payment will be paid extra, HDMI cable and connectors , with all necessary accessories for installation and operational of smart sigange, including power adapters, etc... Warraty - 5 years. Accepted Make: Panasonic/Samsung/LG/Sony Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender