Tender For Electrical Installation Works For Newly Constructed Toilet Block For Male, Female, Transgender, Qua Woman And Pwd At Nabadwip Court (Job No.Ned/Kng/Ow/05/01 Of 26-27).
Tender Value
1.79 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
2 days left
EMD
3588
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nadia → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Electrical Installation Works For Newly Constructed Toilet Block For Male, Female, Transgender, Qua Woman And Pwd At Nabadwip Court (Job No.Ned/Kng/Ow/05/01 Of 26-27).
BOQ
| Sl. No. | Item Description |
| 1 | Electrical Installation Works |
| 2 | Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Make-Legrand/ Siemens ) as to GS (Page No. D-9 Item No.13) |
| 3 | 2 + 12 way Enclosure |
| 4 | Supplying and fixing 240/415 V Isolator on din rail of existing DBs and necessary connection Make-Legrand / Siemens, as to GS. (Page No. D-5 Item No.6) |
| 5 | 240 V, 40A DP |
| 6 | Supplying and fixing 240/415V, MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection Make-Legrand/ Siemens as to GS. (Page No. D-6 Item No.7) |
| 7 | 6A - 32A SP MCB |
| 8 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish (Page No. E-14 Item No.-2(a)) |
| 9 | Average run 8 mtr |
| 10 | Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish (Page No. E-15 Item No.-4(a)) |
| 11 | On Board |
| 12 | Supply and Drawing 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed copper wire (make-Finolex/Polycab/KEI/ RRKable )of following sizes in thick heavy gauge polythene pipe and necy. connection as required incl. cutting channel of (40mmx40mm) size on masonary wall with S&F heavy gauge 19mm dia 3mm thick polythene pipe by means of iron hooks and mending good damages to building works (Page No. E-2 Item No.-3-4 & Page No. E-9 Item No. 1) |
| 13 | 2 x 2.5 sqmm + 1 x 1.5sqmm (for Separate Plug & Power plug ) |
| 14 | S & F of 240 V, 6 A plug socket - 2 nos. with separate 6 A switch (Anchor) - 2 nos. on SM switchboard embedded in wall incl. S & F 175 mm x 100 mm x 65 mm MS (16 SWG) switchboard and bakelite top cover of 3 mm thick by brass screws after making housing for the switch by cutting bakelite cover and making necessary connections as required. [10(b)/E-4] & [14(a),15(a)/E-5] |
| 15 | S & F of 240 V, 20 A plug socket with separate 20 A Piano key type switch (Anchor) on sheet metal switchboard embedded in wall incl. S & F 150 mm x 100 mm x 65 mm MS (16S WG) switchboard and bakelite/perspex top cover of 3 mm thick by brass screws after making housing for the switch by cutting bakelite/perspex cover and making necessary connections as required. (PageNo. E-6 Item No.-22) |
| 16 | Supplying of following sizes Al. armoured PVC/XLPE (Havells/ Glostar /KEI/Polycab/ approved) as per direction of EIC (NS) |
| 17 | 2 core 10 sqmm |
| 18 | Laying of one No. cable of following sizes in underground trench 460 mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed (Page No. F-2 Item No.-1(b)) |
| 19 | upto 35 sqmm |
| 20 | Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting (Page No. F-1 Item No.-2(a)) |
| 21 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required 25 mm dia (Page No. F-6 Item No.-11) |
| 22 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : (Page No. F-4 Item No.-7( c)) |
| 23 | 2 core 10 sqmm |
| 24 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials (Page No. F-5 Item No.-8(b)) |
| 25 | 2 core 10 sqmm |
| 26 | 2)Supply & Delivery of AC 240V 50 Hz 48\\" sweep (1200 mm) ceiling fan complete with down rod , Canopy, fork, P2/S3 capacitor incld. safety wire of suitable gauge with out regulator [Make:USHA Striker 1 star/ Crompton /Orient] (NS) |
| 27 | S&F angular holder (Anchor) on 3\\" wooden double round block incl. S&F 9 Watt LED lamp Philips make.as per direction of EIC (NS) |
| 28 | Supplying & Delivery 4 feet single commercial LED type fluorescent light fittings complete with all accessories with 1 x 20 Wt.Master LED Tube lamp similar to Philips make cat No. TMC-501 P 1xTLED 22 WP3241 corresponding to Wipro / Bajaj / Crompton as per direction of EIC (NS) |
| 29 | Fixing only single/twin LED light fitting suspended 25 cm bellow the ceiling with 2 nos. 20 mm dia EI conduit (16 SWG) supports fixed with “L” type (65 +75) mm (length) x 25 mm (width) x 3 mm (thick) MS clamp whose one side fixed on ceiling with suitable size 4 nos. fastener and other side connected with the conduit with suitable size 4 nos nut-bolt and making connection by PVC insulated stranded copper wire (3 x 1.5 sq. mm up to 1 mt. length through the polythene pipe) with mending good damages to original finish incl. S&F the fixing materials, panting etc as required. NS (Page No. C-2 Item No.-17) |
| 30 | Supply & Delivery 240 V,50 Hz, Metal body Heavy duty Exhaust fan of following sizes and RPM (Make -- EPC/ Calcutta Fans or any approved and recognised brand by EIC) (NS) |
| 31 | 9\\" (23 cm) , 1370 RPM |
| 32 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following dia incld. Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) (Page No. C-4 Item No.-28 & Page No. D-14 Item No. 32) |
| 33 | 9\\" (23 cm) , 1370 RPM |
| 34 | Fixing only outdoor / street light type fluorescent light fitting complete with all accessories to be fixed/projected from the wall of the building incl. making holes to building, S&F 40 mm dia GI pipe ISI-Medium) 1.50 mts. average length, with GI socket at one end and thread at the other end & suitable bend to house the fitting & making necy. connections with S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall and painting (Page No. C-3 Item No.-19) |
| 35 | Supply & Delivery of 45 W LED outdoor street light fitting( Philips /Crompton TRP-409-45-57-SL-GL-NSG/Havells make ) as per direction of E.I.C. (NS) |
| 36 | Excavation of soil for installation of Earth Electrode and filling & ramming as to GS. For Soft soil (Page No. G-1 Item No.-1(b)) |
| 37 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level & restoring surface duly rammed (by ISI-Medium GI pipe as to GS. (Page No. G-1 Item No.-2(a)) |
| 38 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required as to GS. (Page No. G-2 Item No.-4(a)) |
| 39 | Connecting the equipments body to earth busbar including S &F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. (Page No. G-2 Item No.-4(a)) |
| 40 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe as to GS. (Page No. G-2 Item No.-3(a)) |
| 41 | Add GST 18% |
| 42 | Add CESS 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender