Tender For Replacement Of Foundation Of Set No.6 At Shastri Park Bps.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Aug 2026
5 days left
EMD
13900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Foundation Of Set No.6 At Shastri Park Bps.
BOQ
| Sl. No. | Item Description |
| 1 | Replacement of foundation of Set No. 6 at Shastri Park BPS i/c following works :-Dismantling the 5.5 MGD pump No.6 by cutting old worn out nut bolts with the help of gas cutter from the foundation and remove the coupling with the help of heavy manual labour, tools and tackles i/c operation of valves both side. |
| 2 | Removing of suction and delivery side old reducer/ gap piece by cutting old worn out nut bolt with the help of gas cutter and heavy manuual labour, tools and tackles and fixing the blank flange 500mm dia. both side at valves for Set no.6 |
| 3 | Dismantling the motor from the MS base frame by cutting of old worn out nut bolts with the help of gas cutter & removing the cable connection of motor. |
| 4 | S/o Nut Bolts and washer |
| 5 | S/o rubber packing sheet of good quality. Make: Jyoti |
| 6 | S/o tyre coupling with tyre TC-19. Make : Unique/Fenner |
| 7 | Fabrication and supply of Gap piece (reducer) for set No.1,2,3 & 6 of size 500 x 300mm by cutting , welding , grinding of MS pipe and welded the flanged on both side and grinded the surface. |
| 8 | Fabrication and supply of Gap piece ( expander) for set No. 1,2,3 & 6 of size 500 x 250mm by cutting , welding , grinding of pipe and welded the flanged on both side and grinded the surface |
| 9 | Dismantling of old MS Channel for set no. 6 from the RCC foundation with the help of gas cutter with heavy manual labour |
| 10 | Strengthening of M.S. Base frame of approx. size 2.20 Mtr X 1.0 Mtr by MS C-Channel Size 150X75mm 8.8 mtr and MS Flat Bar for load 150X12mm and for support 65X10mm. Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, welding, painting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete for set No. 6 |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) one by one. Approx. Size 2.5X1.5 mtrX 2 nos. = 7.5 mtr DJB DSR Civil (Item No. 4.1.3) for SetNo. 6 |
| 12 | Making key of coupling as per size requirement & Boring New Tyre coupling as per shaft size of motor and pump and fixing at the shaft of motor and pump tighten with the key. |
| 13 | Installation of pump & motor of set no..6 on MS channel base frame with proper alignment by the help of nut bolts and rubber packing sheet i/c welding, grinding & cutting works with the help of manuual heavy labour, tolls and tackles. |
| 14 | fixing the gap piece both side of pump and couple with valves with the help of Nut bolts and rubber packing sheet. |
| 15 | Coupling the motor and pump by tyre coupling and alignment the complete pump set and tighten the nut bolt at MS base frame and painted with black enamel paint with red oxide coat on the MS structure of base fame and gap piece both side. |
| 16 | Making cable connection of motor with the Panel and starter cables with work of removing the old damaged thimble by cutting old cable end termination and making new termination by crimping of new aluminum thimble of both cable end. |
| 17 | Testing and commissioning of Pump set on Load in the presence of Engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender