Tender For Augmentation Of Water Supply From Niz Ur Bps By Replacement Of Old And Worn Out Faulty Pumpset Of Set No 1 And 2 At Niz Ur Bps.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Aug 2026
2 days left
EMD
24800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Augmentation Of Water Supply From Niz Ur Bps By Replacement Of Old And Worn Out Faulty Pumpset Of Set No 1 And 2 At Niz Ur Bps.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of electric connection from panel and motor, pump and motor from coupling, motor and pump removed from base frame. Removing suction and delivery lines, sluice valves, NRV, old damaged MS base frame from foundation etc by electric cutter, gas cutter, tools and tackles, manual labour and shifting the same to JE store. |
| 2 | Breaking of existing RCC foundation by manual means including manual tools or electric demolition hammer as per site requirement including digging upto 50 cm for laying the new foundation and disposing off malba as per instructions from engineer – in – charge within 1 km of radius from site. |
| 3 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump including form work and finishing etc as required as per site requirement. |
| 4 | Providing and fixing of MS base frame as per site sample and directions of engineer in charge for 60 HP motor and pump set. |
| 5 | S/o Horizontal split casing Centrifugal pump with impeller (CI), neckring (Bronze) and casing (CI) shaft and sleeve (SS-410) in fitted condition with suitable bearings with head 42 m and discharge 346 m3/ hr, RPM- 1480, suction/ delivery size: 200 mm / 150 mm, rated input: 60 HP equivalent to SCP 150/390 HA of M&P make. Make: Wilo Matter and Platt, KBL, DJB approved make |
| 6 | Supply of M.S. Pipe 200 mm, 6 mm thick make Jindal / tata / DJB approved make |
| 7 | Supply of M.s. pipe 150 mm, 6 mm thick. Make: Jindal / Tata / DJB approved make |
| 8 | Supply of M.S. Flange 200 mm dia heavy duty holes as per site requirement. Make: ISI/ Jindal/ DJB approved make |
| 9 | Fabrication and supply of suitable reducer as per site requirement for 150 mm to 200 mm |
| 10 | Supply of 200 mm bend of 6mm thickness |
| 11 | Supply of M.S. Flange 150 mm dia heavy duty holes as per site requirement. Make: ISI/ Jindal/ DJB approved make |
| 12 | Supply of MS Nut bolt & Washer of off size as per size requirement |
| 13 | Supply of 75% Neoprene Rubber sheet as per size requirement |
| 14 | Providing fixing of suitable size tyre coupling for the 60 HP motor and pump including making bore holes as per site requirement, and alignment of motor and pump as per site requirement. Make of Coupling: Unique/Fenner/ DJB approved make |
| 15 | Installation and fixing of all the above material with required material handling equipments with all safety precautions for installation. The job i/c erection the complete pipeline, valve, NRV with hardware goods on each joint, connecting the delivery line of the pump with the existing header line and suction line of 60 HP pumphouse to the UGR after providing the shutdown. The job includes covering the pipeline with necessary civil work for foundation and covering the pipeline with cement, making electric connections to motors and starters while taking proper safety precautions etc as per site engineer in charge |
| 16 | Painting the complete pipeline, motor, pump sets, nrv, sluice valves etc with two coats of anti- corrosive paint as per directions of engineer in charge. |
| 17 | Testing & commissioning of above system first at NO LOAD & then at ON LOAD and for its proper operating as per the satisfaction of engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender